User manual

EZ Match User Manual
14-25
Utilities
Tube/Cap Learn
The <@LCAP> command activates the Tube/Cap Learn function. When new profiles are
found, Tube/Cap Learn stores them in the Tube/Cap Library.
When <@LCAP> is sent from Terminal in ESP, one of the following outputs will result:
Learning Tube and Cap...
Added to library #xx
Learning Tube and Cap...
Already in library #xx
Learning Tube and Cap...
Unable to locate a cap
Learning Tube and Cap...
Unable to locate a tube
Learning Tube and Cap...
Unable to add (Library full)!
Learning Tube and Cap...
Please enable a cap detecting operation!
Important: Upon initiation of a Tube/Cap Learn operation, the process searches active
operations (Multi-Operations 1 – 3, <K260> ) and locates the first operation that has Tube/Cap
Detection enabled. This operation is used to “learn” the tube or cap. If no operation has
Tube/Cap Detection enabled, the following message will be output:
“Please enable a cap detecting operation!”