User manual

2-12
EZ Match User Manual
Autoconnect
Autoconnect
• If your RS-232 connection attempt fails, you can use Autoconnect to establish a connection
between
the imager and the host.
• If your communications port is not the default COM1, use the dropdown menu to change
your port.
When you are connected, you will see the green connection indicator in the status bar at
the bottom right of your screen:
Important: If you are using a USB model, you must connect the device to the host
computer before powering-on. Otherwise the unit will not be recognized as a USB device.
• Once you have
chosen
the corre
ct
port, click Start to
conn
ect.