User manual

Chapter 1 Getting Started
1-24 HawkEye™ 45T User Manual Rev 2.0.0, Jan 2009
Cabled Reader — Timeout Settings
Scan the codes in Figure 1–26 to set the amount of time a cabled HE45T will be
enumerated before entering sleep mode. The battery is re-charged at the fastest
rate when the HE45T is in sleep mode:
FIGURE 1–26. Cabled Reader Timeout Settings Codes
Bluetooth Radio Operation
Wireless HE45T readers feature a Bluetooth
®
wireless radio. The radio allows
for point to point wireless communication with other Bluetooth devices that
support serial port protocol (SPP). The following information will give you
general instructions on connecting your HE45T to a desktop or laptop computer
with a Bluetooth radio.
Connecting With A QuickConnect Code
If you purchased a CodeXML Bluetooth Modem or a Belkin
®
Bluetooth adapter
from Microscan or from an authorized distributor, a QuickConnect code was
included (Figure 1–27).
FIGURE 1–27. QuickConnect Code
The QuickConnect code has the information of the Bluetooth address (often a
reference to go to the BD_ADDR) of that device. You can usually find the
12-character Bluetooth address somewhere on the device near the device’s serial
number (Figure 1–27). This code will link your HE45T directly to the desired
Bluetooth device.
Cabled - 2 Hours Cabled - Always (Default)