User manual

8-6 HS-51/HS-51X Wireless Handheld Reader User Manual
Bluetooth® Keyboard-to-Windows 7 Pairing
6. When the reader beeps twice, it is ready for the entry of the PIN. Using the Bluetooth
Keyboard-to-Windows 7 Pin Reference Codes, scan each of the PIN digits with
your HS-51/HS-51X. You will have 30 seconds to enter the PIN. Scan the Submit PIN
symbol after the pin sequence has been entered.
Note: Failure to complete PIN entry in the allotted 30 seconds will result in the appearance
of a Try Again button. Click the Try Again button and repeat steps 3 through 6.
7. Once the installation of the HS-51/HS-51X driver is completed, and if the pin was
entered correctly, a This device has been successfully added to this computer
window will appear.
8. The reader will beep once and the wireless icon LED will remain solid when the reader
is successfully connected.
9. To test the connection, open WIndows 7 Notepad and scan a series of symbols. If data
appears in Notepad after each scan, you have successfully connected to Windows 7. If
Notepad is not showing scanned data, remove the Bluetooth device from the Bluetooth
device screen and repeat steps 1 through 7.