User manual

8-10 HS-51/HS-51X Wireless Handheld Reader User Manual
Bluetooth® Keyboard-to-Tablet Pairing
Keyboard Display Options or Apple iOS
Important: Keyboard Display Options are only compatible with
Apple iOS.
To configure the bottom button on the reader to toggle the host
device’s on-screen keyboard,
scan the following symbol:
To reset the bottom button to the default setting, scan the following
symbol:
Re-connect to Other Bluetooth Devices
To re-establish connection to another host device already paired with the reader, scan the
following symbol:
The reader will appear in the list of devices in the Bluetooth menu. Select the reader to
initiate the connection.
Note: If the reader’s battery has been removed, the reader is out of range (beyond the working
range of 10 meters/30 feet), or the reader is powered off while in default connection settings,
the reader will initiate connection to the most recent host device when back in service.
Clear Connection History
Decode the Clear Bluetooth Connections symbol below to clear previous Bluetooth
addresses from the reader’s memory. Then decode the Reboot Reader symbol.
Note: This command does not automatically remove the reader from the list of devices in
the Bluetooth menu. You must delete the reader from the list.
To clear connection information fom all Bluetooth Keyboard hosts, scan the following symbol:
Note: To re-establish a connection once the connection history has been cleared, repeat
steps 1 through 8.
Keyboard Display
Options On
Keyboard Display
Options Off
Switch Host
Device
Clear Bluetooth
Connection
Reboot
Reader