User manual

HS-51/HS-51X Wireless Handheld Reader User Manual 8-11
Advanced Operations
Bluetooth
®
Keyboard-to-Mobile Phone Pairing
This section describes how to pair a Bluetooth Keyboard with a mobile phone. The HS-51/HS-51X
is able to decode symbols on mobile phones by turning off the reader’s LED illumination,
capturing two images of the symbol, comparing those two images, and then choosing the
best image. If the reader is unable to decode the best of the two images, the reader’s gain
is automatically adjusted and the cycle is repeated.
The HS-51/HS-51X is compatible with most Bluetooth-keyboard-supported smart phones.
1. In your mobile phone’s list of applications, select the Settings icon.
2. Select the Bluetooth setting.
3.
Scan the following symbol to enable the HS-51/HS-51X to be discoverable by the phone.
4. Once the reader is in discoverable mode, it will beep twice. You will have 30 seconds
to initiate a connection to the host device. If 30 seconds elapses without connecting to
the host device, scan the discoverable mode symbol again.
5. The HS-51/HS-51X will appear on the list of Bluetooth devices on the phone. Select
the reader to initiate connection. Some smart phones require you to refresh the list of
devices before the reader will appear for connection initialization.
6. A window with a PIN will appear on the phone.
7. Once the reader beeps twice, it is ready for you to enter the PIN. Using the Bluetooth
Keyboard-to-Mobile Phone Pin Reference Codes, scan each of the PIN digits with
your reader. You will have 30 seconds to enter the PIN. Scan the Submit PIN symbol
when the pin sequence has been entered.
8. The phone will show a positive connection indicator when the connection is completed.
The HS-51/HS-51X will beep once when connected and the wireless icon LED will
remain solid.
Bluetooth Keyboard
Discoverable Mode