User manual

Quick Start

HS-51/HS-51X Wireless Handheld Reader User Manual 1-5

Configure Hardware

Installation

• Connect the Charging Station with Embedded Modem to the PC via the USB Cable.

•Place the Battery in the reader.

• Charge the reader until the battery LEDs show a 100% charge.

• Power-on the reader.

• Decode the Quick Connect Code on the Charging Station to establish a Bluetooth

connection between the reader and modem.

• Configure the reader for your application in ESP before use.

• Save Settings using ESP when reader configuration is complete.

Item Description Part Number

HS-51 Wireless Handheld 2D Reader FIS-HS51-0001G

HS-51X Wireless Handheld DPM Reader FIS-HS51X-0002G

2 Charging Station with Embedded Modem

3 Lithium-Ion Battery

Charging Station and Handheld Reader

USB Cable

to PC

Note: All required hardware for default configuration

is included with the reader and does not need to be

purchased separately. This includes a battery, a

charging base with embedded Bluetooth modem,

and a 3-foot USB cable.

Test Symbol

(ABCDEFGHIJKLMNOP)