User manual

1-8 HS-51/HS-51X Wireless Handheld Reader User Manual

Connect to the Reader

•

The

USB

dialog will appear. You will see the device ID in the

Select Device

field. Click

Connect

Note: You can also select Connection Wizard from the Connect dropdown menu or

click the Connect button to access the USB dialog.

• When you are connected successfully, the CONNECTED message will appear in a

green box in the status bar at the bottom right of the screen.

You are now ready to configure your reader using ESP. Subsequent sections provide

more detailed information about ESP’s configuration options.

If the reader is already connected to

the Bluetooth Modem, you will see

the ID of your reader in the Select

Device field. The reader ID number

should match the serial number

printed on the reader’s ID label.

If the reader is not yet connected to the modem,

the Select Device field will show Bluetooth

Modem. Decode the Quick Connect Code on

the base of the modem to connect the reader to

the modem. The reader ID will then appear.