User manual

4-16 HS-51/HS-51X Wireless Handheld Reader User Manual
Other Communications Mode Commands
Text Commands
When the Text Commands feature is enabled, the reader can accept text commands via
USB Virtual COM modes.
Note: Text Commands are not supported in USB HID Mode.
Text Commands by ESP
Entering Magic Sequence
The magic sequence is ;>PA followed by a numeric value of 1, 3, or 7.
1 = Enable Text Commands
3 = Enabled; Suppress Echo
7 = Enabled; Suppress Echo and Responses
In the example below, the magic sequence entered will Enable Text Commands and
Suppress Echo and Responses.
Enable Text Commands
Disable Text Commands
(Default)
When Text Commands are set to
Enabled; Suppress Echo, text
that a user enters in the Terminal
will not be shown. When Text
Commands are set to Enabled;
Suppress Echo and Responses,
neither user-entered data or reader
responses will be shown, and only
decoded symbol data will appear in
the Terminal.
See Terminal Right-Click Menu
for a way to change Echo settings
directly in the Terminal view.
When Magic Sequence is enabled, it allows the user to enable
Text Commands by entering a predetermined series of keystrokes.
Enter the magic sequence in
this text field and click Send.
Once the magic sequence has been sent, you can send text commands from the same text field.