Brochure

ManualsBrandsMicrosemi ManualsNetwork AccessoriesOutdoor PoE Surge Protector

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability

whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction

with mission-critical equipment or applications. Any performance specications are believed to be reliable but are not veried, and Buyer must conduct and complete all performance and other testing of the products, alone

and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability

of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer.

Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in

this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.

Key Features

• Supports data rates of up to 1 Gbps

• Protects up to 10 KV surge

• Protects alll eight lines including PoE

• Waterproof—IP66 rated

• UL certied

• Can be wall- or pole-mounted

Overview

The PD-OUT-SP11 is a high-quality surge protection device designed to

protect indoor Ethernet networks from lightning that may come from outdoor

environment through the Ethernet cable. The product is enclosed in a metal

weatherproof enclosure, meeting IP66. It can be easily mounted on a wall or

a pole. The SP device can be installed before the cable enters the building

to protect the indoor network or immediately adjacent to the wall- or pole-

mounted outdoor device (that is, WLAN AP, IP camera, and so on).

PD-OUT/SP11

Outdoor PoE Lightning Surge Protector

Summary of content (2 pages)

PAGE 1
PD-OUT/SP11 Outdoor PoE Lightning Surge Protector Key Features • Supports data rates of up to 1 Gbps • Protects up to 10 KV surge • Protects alll eight lines including PoE • Waterproof—IP66 rated • UL certified • Can be wall- or pole-mounted Overview The PD-OUT-SP11 is a high-quality surge protection device designed to protect indoor Ethernet networks from lightning that may come from outdoor environment through the Ethernet cable. The product is enclosed in a metal weatherproof enclosure, meeting IP66.
PAGE 2
PD-OUT/SP11 Outdoor PoE Lightning Surge Protector Specifications Feature Number of Ports Pass Through Data Rates Surge Handling Capability DC Input Dimensions Weight Connectors Environmental Conditions Reliability Warranty Regulatory Compliance Immunity to Surges Safety Approvals Ordering Information Description Part Number: PD-OUT/SP11 1 10/100/1000 Mbps 10 kv, 5 kA to ground in 8/20 μs, 800 v, 100 A PoE Input Power: 95 W maximum Input Current: 2 A maximum 30 mm (W) x 30 mm (H) x 190 mm (L) (1.