Specifications

4 Port Industrial Device Server Manual page 11/36
MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. [phone] - Fax [phone] - www.microsens.com
The following table describes the labels in this screen.
Label
Description
Device
Name/location
You can set the device name or related information. By clicking
“Locate On” button you can locate the serial server’s position.
Set SNTP
Input the SNTP server domain name or IP address, port and select the
Time zone.
Set Auto IP Report
By Clicking the “Get current Host” button you will get your local IP,
and then set the Report interval time. The device server will report its
status periodically.
At IP collection option show the device server status. The report interval is 0
indicate disable this setting (default). But you can set the other IP or Port.
Security
The following table describes the labels in this screen.
Label
Description
Accessible IP
Setting
To prevent unauthorized access by setting host IP addresses and
network masks.
Password setting
You can set the password to prevent unauthorized access from your
server. Factory default is “microsens”.