Specifications

4 Port Industrial Device Server Manual page 19/36
MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. [phone] - Fax [phone] - www.microsens.com
The following table describes the labels in this screen.
Label
Description
Data Port
Set the port number for data transmission.
Auto Scan
Scan the data port automatically.
Idle Timeout
When serial port stops data transmission for a defined period of time
(Idle Timeout), the connection will be closed and the port will be freed
and try to connect with other hosts. 0 indicate disable this function.
Factory default value is 0. If Multilink is configured, only the first host
connection is effective for this setting.
Alive Check
The serial device will send TCP alive-check package in each defined
time interval (Alive Check) to remote host to check the TCP
connection. If the TCP connection is not alive, the connection will be
closed and the port will be freed. 0 indicate disable this function.
Factory default is 0.
Max Connection
The number of Max connection can support simultaneous connections
are 5, default values is 1.
Service Mode – TCP Client Mode
In TCP Client Mode, device can establish a TCP connection with server by the
method you have settled (Startup or any character). After the data has been
transferred, device can disconnect automatically from the server by using the TCP
alive check time or Idle time settings.