Specifications

4 Port Industrial Device Server Manual page 30/36
MICROSENS GmbH & Co. KG - Küferstraße 16 - 59067 Hamm - Tel. [phone] - Fax [phone] - www.microsens.com
Label
Description
Destination Host
Set the IP address of host and the port number of data port. .
Idle Timeout
When serial port stops data transmission for a defined period of time
(Idle Timeout), the connection will be closed and the port will be freed
and try to connect with other hosts. 0 indicate disable this function.
Factory default value is 0. If Multilink is configured, only the first host
connection is effective for this setting.
Alive Check
The serial device will send TCP alive-check package in each defined time
interval (Alive Check) to remote host to check the TCP connection. If the
TCP connection is not alive, the connection will be closed and the port
will be freed. 0 indicate disable this function. Factory default is 0.
Connect on
Startup
The TCP Client will build TCP connection once the connected serial device
is started.
Connect on Any
Character
The TCP Client will build TCP connection once the connected serial device
starts to send data.
Service Mode – UDP Client Mode
Compared to TCP communication, UDP is faster and more efficient. In UDP mode, you
can Uni-cast or Multi-cast data from the serial device server to host computers, and the
serial device can also receive data from one or multiple host.