www.nokia.com www.nokia.com/latinoamerica Copyright © 2005 Nokia. All rights reserved. Copyright © 2005 Nokia. Todos los derechos reservados.
Nokia 2865 and Nokia 2865i User Guide Nota: La traducción en español de este manual inicia en la Página 103.
Part No. 9249438, Issue No. 1 Copyright ©2006 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 2865, Nokia 2865i, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2006. Tegic Communications, Inc. All rights reserved.
Contents Contents For your safety..................................................................................... 4 Welcome ............................................................................................... 7 1. Phone at a glance.......................................................................... 8 2. Set up your phone....................................................................... 12 3. Text entry...............................................................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACKUP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone.
For your safety ■ Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply.
Welcome Welcome Congratulations on your purchase of this Nokia mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, FM radio, and more. Your phone can also connect to a PC, laptop, or other device using a USB data cable, infrared, or Bluetooth wireless technology. Accessibility solutions Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities.
Phone at a glance 1. Phone at a glance ■ Keys and parts Earpiece port (1) Display screen (2) Four-way scroll and center selection key (3) Right selection key (4) Power key and end key (5) Keypad (6) Pop-Port™ connector (7) Microphone (8) Charger port (9) Call key (10) Left selection key (11) 2.
Phone at a glance ■ Standby mode Depending on your wireless service provider and the model number of your phone, some or all of the following selection keys may appear in the standby mode. The standby mode is home base and indicates your phone is idle. Signal strength (1)—More bars indicate a stronger network signal. Menu (2)—Press the center selection key to select this option. Go to (3)—Press the left selection key to select this option.
Phone at a glance Note: Some features may not be available, depending on your network. For more information, contact your wireless provider. Scroll method You can use the four-way scroll key to scroll up, down, left, and right through the options. 1. To select Menu, use the center selection key. To scroll through the main menu, use the scroll key. As you scroll through the menus, the menu number appears in the upper right corner of the display.
Phone at a glance ■ Security feature The security feature protects your device from unauthorized outgoing calls or denies access to stored information with a lock or security code. The lock code is a four-digit number, while the security code is a five-digit number. By default, the security feature uses the lock code (defaulted to 0000, 1234, or the last four digits of your phone number) to protect your phone. To access the Security menu, do the following: 1. Select Menu > Settings > Security. 2.
Set up your phone 2. Set up your phone ■ Antenna Your device has an internal antenna. Hold the device as you would any other telephone with the antenna area pointed up and over your shoulder. Note: As with any other radio transmitting device, do not touch the antenna area unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed.
Set up your phone Remove the back cover Slide the back cover toward the bottom of the phone, then lift the cover up and remove it. Remove the battery After you remove the back cover, insert your finger into the finger grip, and lift the battery from its compartment. UIM (CDMA SIM) card slot Your phone may have a built-in UIM card slot. However, the UIM is not functional in this phone model. Avoid placing anything into the UIM card slot. Replace the battery 1.
Set up your phone Replace the back cover 1. Set the back cover on the phone with the cover tabs aligned with the slots in the phone. 2. Slide the back cover toward the top of the phone until the back cover is securely in place. Charge the battery 1. Plug the charger transformer into a standard ac outlet. 2. Insert the charger output plug into the round jack at the bottom of the phone. If necessary, you can use a CA-44 adapter cable (1) to connect a charger and the phone.
Set up your phone ■ Turn your phone on or off 1. To turn your phone on or off, press and hold the end key for at least 3 seconds. 2. Enter the lock code, if necessary, and select OK. ■ Connect the headset A compatible headset, such as HS-5, may be purchased with your phone or separately as an enhancement. See "Enhancement settings," p. 65 for information. 1. Plug the headset connector into the Pop-Port™ connector at the bottom of your phone. appears on the display. 2. Position the headset on your ear.
Set up your phone ■ Make calls Keypad 1. Enter the phone number (including the area code), and press the call key. To delete a character to the left of the cursor, select Clear. 2. To end the call, press the end key. To cancel the call attempt, select End call. Save contact option 1. Enter the phone number (including the area code) and select Save, enter a name for the contact, and select OK. 2. To make the call, press the call key. To return to the standby mode, select Done. Contacts list 1.
Set up your phone ■ Answer calls Answer or silence an incoming call 1. To answer the call, press the call key or select Answer. 2. To reject the call, press the end key. Select Silence to mute the ringing tone. Select Dismiss or do nothing, and the call is eventually forwarded to voice mail. If your phone is set to Silent in the Profiles menu, select Dismiss, and the call is forwarded to voice mail.
Set up your phone Options during a call Many of the options that you can use during a call are network services. Check with your wireless service provider for more information. During a call, select Options and one of the following: Loudspeaker or Normal—Activate or deactivate the loudspeaker while in a call. New call—Initiate a conference call. See "Make a conference call," p. 16 for information. Save—Save a number entered during a call.
Text entry 3. Text entry You can use two methods for entering text and numbers: standard mode and predictive text mode. ■ Standard mode Standard mode is the only way to enter text into the contacts list, and to rename caller groups. Text (Abc) • Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry. • Press 0 to enter a space, thereby accepting a completed word.
Text entry Punctuation and special characters While at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. Scroll to navigate through the list of special characters. Once a character is highlighted, select Insert to insert the character into your message. ■ Predictive text mode Predictive text input allows you to write messages quickly using your keypad and the built-in dictionary.
Text entry Press and hold: • * to display special characters. Press * again to cycle through all available characters. • the specific number key to enter a number. • # to select Editor settings > Number mode, Prediction on or Prediction off, or Writing language. ■ Change case and mode Press # to switch between uppercase, lowercase, and sentence case, as well as standard and predictive text modes. Case and mode are indicated by the following icons that appear in the upper left of the display screen.
Messaging 4. Messaging Your phone can create and receive text, multimedia, voice and minibrowser messages. Check with your service provider to see what messaging is available for you. ■ Text messages Text messaging is a network service. See "Network services," p. 6, for more information. If your wireless service provider supports this feature, you can send and receive text messages to compatible phones that are also subscribed to the service.
Messaging My folders—Create and name personal folders. Delete messages—Delete messages from a selected folder or all folders. Message settings—Change settings to read, write, and send text messages. Send numeric page—Send a message with a number to which to return a call. Write and send text messages 1. Select Menu > Messaging > Text messages > Create message. To go quickly to the Create message screen from the standby mode, scroll left. 2. Compose a text message using the keypad.
Messaging Choose a text message option Create message options When you create or reply to a text message, depending on the mode of text input you use and the features supported by your wireless service provider, some or all of the following are available: Sending options—Mark or Unmark a message as Urgent, Delivery note, Callback no., or Signature. Clear text—Erase all text from your message. Insert contact—Insert detail from your contacts list into your message.
Messaging Use custom folders Your phone has a folder system that saves and stores text messages. Additionally you can create custom folders. Create a custom folder To organize your messages, create custom folders, and save messages you want to keep there. 1. To create your initial custom folder select Menu > Messaging > Text messages > My folders > Add fold. 2. Enter a name for the new folder, and select OK. 3.
Messaging Delete all messages in a folder 1. Select Menu > Messaging > Text messages > Delete messages and one of the following: All—Deletes all text messages in the folder. All read—Deletes only the read text messages in the folder. All unread—Deletes all unread text messages in the Inbox. 2. If you select All or All read, select Mark or Unmark to choose the folders from which to delete text messages. Select Options > Mark all to choose all folders. 3. Select Done after choosing the folders. 4.
Messaging ■ Multimedia messages Multimedia messaging is a network service. See "Network services," p. 6, for more information. If your wireless service provider supports this feature, you can send and receive multimedia messages to compatible phones that are also subscribed to the service. A multimedia message can contain text, sound, a picture, or a video. Your phone supports multimedia messages that are up to 300 KB. If the maximum size is exceeded, the phone may not be able to receive the message.
Messaging Outbox—Check for outgoing multimedia messages. Multimedia messages are automatically stored in the Outbox as they are sent. If your service is interrupted while sending, then messages are stored in the Outbox until another delivery attempt is made. Sent items—Sent multimedia messages are stored in Sent items. Saved items—Save multimedia messages for later use in Saved items. Delete messages—Delete multimedia messages from the Inbox, Outbox, Sent items, or Saved items.
Messaging Messages that you send are saved in Sent items if the setting Save sent messages is set to Yes. See "Multimedia message settings," p. 32. Read and reply to multimedia messages When a multimedia message is received, is displayed along with the percentage display indicating the download progress. Once the message is fully downloaded, and a notification are displayed. 1. To view the message, select Show. To view the message later, select Exit.
Messaging Delete > Image, Sound clip, Video clip, or Slide—Delete one of these files from your message. Only appears when your message has a file attachment. Edit subject—Edit the subject heading. Clear text—Erases all text from the current slide in your message. Preview—Preview the message or slide presentation before sending it. Select Stop to end the preview. Select Play to start the preview again or Back to return to the list of options. Previous slide—Move to the previous slide.
Messaging Read message options When you read a multimedia message, the following options are available: Set contrast—Adjust the contrast of an image. This option is only available when viewing an image. Details—Displays the details of a file attachment to which you have scrolled. Save image, Save sound clip, or Save video clip—Save the corresponding file to the Gallery. Images, sound clips, and videos must be opened before you can save them. Save link—Save the corresponding Web link.
Messaging Multimedia message settings You can change how your messages are displayed or saved. Select Menu > Messaging > Multimedia msgs. > Message settings and one of the following items: Save sent messages > No or Yes—Save the multimedia messages that you send to the Sent items folder. Delivery reports > On or Off—Request delivery reports to inform you if a message is delivered. Scale image down > Yes or No—Request for images to be automatically scaled down.
Messaging Retrieve manually—Choose the messages you wish to retrieve. When new messages arrive, you are notified that a multimedia message is available for retrieval. If you select to manually retrieve messages, select Show to open the message notification, then Retrieve. Select Exit to save the notification to your inbox, and retrieve the message later. Reject—Sets the phone to reject multimedia messages. Allow or block advertisements Allows you to block advertisements.
Messaging ■ Voice messages Voice mail is a network service that allows callers to leave a voice message when you cannot be reached directly. When you receive a voice message, your phone will beep, display a message, or both. If you receive more than one message, your phone shows the number of messages received. Save voice mailbox number Your wireless provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in step 2.
Messaging Write down number and process 1. Write down your voice mailbox number. 2. Call and check your voice mail as you normally would. 3. Write down your interaction with the recorded prompts step-by-step. Note that each voice mail service may vary. Your steps may resemble the following: Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press *. Be precise; you will need this information in "Set up voice mail with dialing codes," p. 35. Set up voice mail with dialing codes 1.
Log 5. Log Log stores information about the last 30 missed, 30 received, or 30 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest. Whether viewing missed, received, or dialed calls, the menu options are the same: Time of call—Display the date and time of the call. Send message—Send a message to the number. Use number—Edit the number and associate a name with the number.
Log ■ Time of call You can make or receive up to five calls to or from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. 1. While viewing a missed, received, or dialed call, select Options > Time of call. 2. Scroll down to view the most recent call times from this number. 3. Select Back to return to the options list. ■ View Message Recipients You can view the names of those to whom you have sent messages.
Log ■ Data or fax calls Data and fax calls are network services. See "Network services," p. 6, for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data and fax calls. Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes and so forth.
Contacts 6. Contacts The contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list. Select Menu > Contacts and from the following options: Names—Display the list of contacts currently on your phone. Settings—Change your contact settings. Groups—Assign contacts to caller groups. Voice tags—Assign voice commands to phone numbers.
Contacts ■ Add new contacts Save a name and number 1. Enter the phone number you wish to save. 2. Select Save. 3. Enter the name, and select OK > Done. When you enter a number, you can select Options > Insert pause ('p') to insert a pause code or Options > Insert wait ('w') to insert a wait code. See "Insert dialing codes," p. 40, for more information. Save a number (only) Enter the phone number you wish to save, and select and hold Options. Save a contact 1.
Contacts Save multiple numbers You can save different types of phone numbers per contact. The first number you save for any entry is automatically set as the default, but the default number can always be changed. 1. Scroll down to display your list of contacts. 2. Select the contact to which you want to add a phone number. 3. Select Details > Options > Add detail > Number > General, Mobile, Home, Work, or Fax. 4. Enter the phone number, and select OK.
Contacts 2. Select the contact to send as a business card and Details. 3. Select the number to use and Options > Send bus. card > Via multimedia, Via text message, Via Bluetooth, or via infrared. 4. Select Primary number or All details to send all the personal details that have been defined. 5. Enter the number for your recipient, or select Search to retrieve a number from your contacts; select OK. ■ Edit contacts 1. Scroll down to display your list of contacts. 2. Scroll to a contact, select Details. 3.
Contacts ■ Modify contact settings Select Menu > Contacts > Settings and the setting you wish to change: Scrolling view—Select Normal name list, Name and number, Large name list, or Name and image view. Memory status—View the amount of phone memory used as well as the amount of phone memory available. ■ Set up caller groups You can add contacts to caller groups that you create and assign a unique ringing tone or graphic to each group.
Contacts • Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment. • Very short names are not accepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. Assign a voice tag 1. Scroll down to your list of contacts. 2. Scroll to a contact, and select Details. 3.
Contacts Delete a voice tag 1. Select Menu > Contacts > Voice tags. 2. Scroll to the voice tag you want to delete, and select Delete. Delete voice tag? appears. 3. Select Yes to erase the voice tag. ■ Set up 1-touch dialing You can associate any entry in your contacts with a key from 2 to 9; to dial those entries, select and hold the assigned key. Assign a key to 1-touch dialing 1. Select Menu > Contacts > 1-touch dialing. 2. Scroll to any empty slot, and select Assign. 3.
Contacts ■ Display phone number Select Menu > Contacts > My number to display your phone number. ■ Delete contacts Delete individual contacts Scroll down to display your list of contacts, scroll to a contact, and select Options > Delete contact > Yes or No. Delete all contacts Select Menu > Contacts > Delete all contacts > Yes, enter your lock code, and select OK. See "Security," p. 66 for more information.
Gallery 7. Gallery You can save pictures, videos, recordings, music files, and ringing tones to folders in the Gallery, and add new folders to the ones already there. To download images and tones, use multimedia messaging, text messaging, mobile Internet sites, or Nokia PC Suite. Your phone supports a digital rights management system to protect content that you have acquired.
Gallery ■ Gallery options Select Menu > Gallery > Options and one of the following: Delete folder—Delete a folder you have created. You cannot delete a preset folder. Move—Move the selected folder into another folder. After selecting Move, scroll to another folder, and select Move to. You cannot move a preset folder. Rename folder—Rename a folder you have created. You cannot rename a preset folder. Details—Show the name, size, and date of creation of the selected folder.
Media 8. Media ■ Media player With Media player you can download, view, and play compatible images, audio and video files, and animated images from a variety of sources. Media player plays streaming videos and streaming audio from a network server. Streaming functionality is a network service and requires network support. Check the availability of these services, pricing, and tariffs with your network operator or the service provider.
Media Turn the radio on and off 1. Connect the phone to a compatible headset or music stand. 2. Select Menu > Media > Radio. The channel location number, the name of the radio channel (if you have saved the channel), and the frequency of the radio channel are displayed. To use the graphical keys , , or right to the desired key, and select it. , or If you have already saved radio channels, select channel you would like to listen to.
Media Tune and save a radio channel 1. You can save a preset station to any one of 20 locations in memory. When the radio is on, select or to change the radio frequency in 0.1 MHz steps, or select and hold or to start the channel search. Searching stops when a channel is found. 2. To save the channel, select Options > Save station. To save the channel to a memory location 1 to 9, press and hold the corresponding number key while the radio is playing.
Settings 9. Settings Use the Settings menu to customize the functions of your phone. ■ Profiles Profiles define how your phone reacts when you receive a call or message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the available profiles can be left at their default setting, or customized to suit your needs. The following profiles are available: Normal, Silent, Meeting, Outdoor, and two customizable profiles.
Settings Power saver When this feature is enabled, the display shows only a simplified display after a time-out period. Select Menu > Settings > Display > Power saver > On or Off Standby mode settings You can choose settings for the standby mode on the display. Wallpaper You can set an Image or a Slide set for the phone display, or open the camera and set a new photo as wallpaper.
Settings Sleep mode The sleep mode is a power-saving feature that turns the phone display off during inactivity. To activate the sleep mode feature on your phone., select Menu > Settings > Display > Sleep mode > On or Off. When the sleep mode is activated, the display is completely blank, but the phone is still active. Press any key to restore the display. Backlight time-out To control the time-out of the backlight on your phone, select Menu > Settings > Display > Backlight time-out.
Settings ■ Time and date Clock Show or hide the clock Select Menu > Settings > Time and date > Clock > Show clock or Hide clock. Set the time 1. Select Menu > Settings > Time and date > Clock > Set the time. 2. Enter the time (in hh:mm format), and select OK. 3. Select am or pm (this option is displayed only when 12-hour format is in use).
Settings If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you reenter your digital network. You may be prompted to enter the time manually, if the battery is removed or discharged while you are outside the digital network and the battery is installed or recharged while you are still outside of the digital network.
Settings Calling cards If you use a calling card for long distance calls, save the calling card number in your phone. The phone can store up to four calling cards. Contact your calling card company for more information. Save information 1. Select Menu > Settings > Call > Calling card. 2. Enter your security code, and select OK. See "Security," p. 66. 3. Scroll to the calling card of your choice, and select Options > Edit > Dialing Sequence and one of the following sequence types: Access no.+phone no.
Settings Data and fax calls Data and fax calling is a network service. See "Network services," p. 6. If your network operator supports this feature, you can set up the device to send or receive data and fax calls when connected to a device such as a PDA or PC. Receive data or fax calls For better performance during data or fax calls, place the device on a stationary surface. Do not move the device or hold it in your hand during a data call.
Settings Ringing tone for no caller ID You can select a different ringing tone for calls received from a restricted number or with no caller ID. Select Menu > Settings > Call > Ringing tone for no caller ID > On or Off. See "Customize a profile," p. 52, for more information on selecting a ringing tone. ■ Phone Language settings To set the language of the display text seen on the phone, select Menu > Settings > Phone > Phone language and the language of your choice.
Settings Set type To set the type of touch tone, select Menu > Settings > Phone > Touch tones > Manual touch tones and one of the following: Continuous—The tone sounds for as long as you press and hold a key. Fixed—Use to send tones of the duration you specify in the Touch tone length option. Off—Use to turn off tones. No tones are sent when you press a key. Set length To specify touch tone length when using the Fixed option, select Menu > Settings > Phone > Touch tones > Touch tone length > Short (0.
Settings Activate a voice command After you have associated a voice command tag with a phone function, you can issue a command by speaking the voice command tag. 1. Select and hold Names. 2. When Speak now appears, pronounce the voice tag clearly into the microphone. When the phone finds the voice command tag, Found: appears, and the phone plays the recognized voice command tag through the earpiece. The function you requested is activated.
Settings The two devices only need to be within a maximum of 30 feet (10 meters) of each other. The connection can be subject to interference from obstructions such as walls or other electronic devices. The Bluetooth wireless technology application whether used actively or in the background, consumes the battery and reduces the operating time of the phone. This device is compliant with Bluetooth Specification 2.
Settings Select Menu > Settings > Connectivity > Bluetooth > Paired devices > Options and one of the following: Assign short name—Give a nickname to the selected device (visible to you only). Auto-conn. with- out confirmation—Select No if you want the phone to connect to the selected device automatically or Yes if you want the phone to ask for your permission first. Delete pairing—Delete the pairing to the selected device.
Settings Send data Instead of using the Connectivity menu, you can use other phone menus to send various types of data to other devices with Bluetooth connectivity. For example, you can send a video from the Video clips folder of the Gallery menu. See the appropriate sections of the user guide for information about sending different types of data.
Settings 2. Click on USB Device in the Hardware devices window. A popup window shows Stop a Hardware device. 3. Scroll to a USB device, and click OK. The Safe to Remove Hardware popup window is displayed with the following message “The ‘USB Device’ device can now be safely removed from the system." 4. Click OK. ■ Enhancement settings The Enhancements settings menu displays certain options only if the phone is or has been connected to a compatible enhancement type.
Settings Lights—On or Automatic to keep the phone lights always on or to shut off automatically after several seconds. ■ Security To access Security for the first time, you must enter the preset lock code. By default, the preset lock code may be a four digit number such as 1234 or 0000, or the last four digits of your phone number. If none of these work, contact your wireless service provider for help.
Settings 1. Select Menu > Settings > Security. 2. Enter the lock code, and select OK. 3. Select Allowed no. when phone locked > Assign and one of the three slots. 4. Enter the phone number, or select Search to retrieve the number from the phone book; select OK. To place a call to an allowed number when the phone is locked, enter the allowed number and press the call key.
Settings 5. To modify the restriction list, select from the following options: Select—Add numbers to the restriction list. Add restriction—Add a restriction to a number (unavailable if memory is full). Edit—Edit a restriction on a number. Delete—Delete a number from restriction list. When calls are restricted, calls may be possible to the official emergency number programmed into your device. Voice privacy Voice privacy is a network service, and its function depends on a variety of services.
Settings Roaming options If supported by your wireless service provider, you can select which roaming option you wish to use. Depending on your service provider, some options may be different or may not appear. Select Menu > Settings > Network > Roaming options and one of the following. Home only—You can make and receive calls in your home area only. Automatic A—The phone automatically searches for service in another digital network. The roaming rate applies when not in the home service area.
Settings The activated feature code is now stored in your phone, and you are returned to the Feature code: prompt. Continue entering other feature codes (for example, *900 to cancel Forward if busy), or press the end key to return to standby mode. When you enter a network feature code successfully the feature becomes visible in the Network services menu. Call forwarding Call forwarding tells your network to redirect incoming calls to another number.
Settings My number selection Select Menu > Settings > Network services > My number selection. This feature is carrier dependent. ■ Restore factory settings You can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected). Select Menu > Settings > Restore settings, enter the lock code, and select OK.
Organizer 10. Organizer Your phone contains features to help organize your everyday life, including an alarm clock, calendar, calculator, countdown timer, and stopwatch. ■ Alarm clock Set an alarm The alarm clock is based on the phone clock. An alarm sounds at the time you specify, even if the phone is turned off. 1. Select Menu > Organizer > Alarm clock > Alarm time. 2. Enter the time for the alarm in hh:mm format, and select OK. 3. Select am or pm if 12-hour clock format is on.
Organizer Set the snooze time-out You can set the Snooze time-out for the alarm. Select Menu > Organizer > Alarm clock > Snooze time-out and a snooze time. When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the currently active profile), and lights up. With the device on, select Stop to shut the alarm off or Snooze to interrupt the alarm for 10 minutes. Snooze on appears in the display. If you do not press a key, the alarm stops for the snooze time-out period, then sounds again.
Organizer Delete all notes—Delete all calendar notes. This option appears only if a calendar note has been created. Make a calendar note You can make a calendar note for a specific date. You can choose from five types of notes. Your phone asks for further information depending on which note you select. You can also set an alarm for your note. 1. Select Menu > Organizer > Calendar. 2. Scroll to the date for which you want to make a note. Scroll or select Options > Go to date, and select a date. 3.
Organizer Delete—Delete the note. Edit—Edit the note. Use detail—Use a detail contained in the note. Move—Move the note to another date on your calendar. Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly, monthly, and yearly). Repeat is not available for Birthday note. Go to date—Jump to another date on your calendar. Go to today—Return to the current date.
Organizer ■ Notes You can write text notes with the Notes. You can also send notes using text messaging, infrared, or Bluetooth connectivity. Select Menu > Organizer > Notes to see your current list of notes. If there are no notes, select Add note to create a note. If there are existing notes, scroll to a note, and select View. Create your note, and select Save. To write additional notes, select Menu > Organizer > Notes > Options > Make a note. Create your note, select any note options, and select Save.
Organizer ■ To-do list Use the To-do list feature to keep track of your tasks. You can save a task or errand as a to-do list note, select a priority level for the to-do list note, and mark it as done when you have completed it. You can sort the to-do list notes by priority or by date. Select Menu > Organizer > To-do list. The current to-do list is displayed. If there are no to-do tasks, select Add note to create your first to-do list note.
Organizer Send > Send as message, Via calendar, Via infrared, or Via Bluetooth— Send the to-do list note. Go to calendar—Leave the to-do list, and go to the calendar. Save to calendar—Save the to-do list note to your calendar.
Organizer To use the calculator, do the following: 1. Select Menu > Organizer > Calculator. 2. Enter the first number in the calculation. Press # for a decimal point if necessary. Press the scroll key up or down to change the sign of your number or value. Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character. 3. Enter the second number in your calculation. 4. Select Equals.
Organizer ■ Timers Your device contains two event timers: a normal timer that counts down a set interval, and an interval timer that counts up set intervals. The timers only work when the phone is on. Once you turn off your phone, the timers are no longer active. Normal timer This countdown timer enables you to enter a specific duration (up to 99 hours, 59 minutes, and 59 seconds). When the time runs out, your device sounds an alarm. To set the normal timer, do the following: 1.
Organizer 2. Select Add new timer. This option only appears if you have already created an interval timer. 3. Enter a name for the timer, and select Save. 4. Enter a name for the first timer period, and select Save. 5. Enter the desired time interval, and select OK. 6. Select an existing stored period and Edit period, Add period, Delete period, or Start timer. To use an interval timer: 1. Select Menu > Organizer > Timer > Interval timer, and one of the set interval timers.
Organizer Save a time To save a time while the clock is running, select Stop > Save, enter a name for the measurement, and select OK. If you do not enter a name, the total time is used as the default title for the lap or split time. Stopwatch options Select Menu > Organizer > Stopwatch and one of the following: Continue—Continue to measure time and return to the stopwatch screen. This option appears only if the clock is running. Show last time—View the last measured time.
Extras 11. Extras Your wireless provider may provide extra features in the Extras menu. If no extra features are provided, you may not see this menu item. ■ Games Select Menu > Extras > Games to display the games on your device. Select Options to see additional choices. ■ Collection Select Menu > Extras > Collection > and select an application. Select Options to see additional choices. An application may require a few seconds to load. When the launch screen disappears, the application is ready.
Minibrowser 12. Minibrowser Minibrowser is a network service. See "Network services," p. 6, for more information. Your phone has a built-in mobile Web browser you can use to connect to selected services on the mobile internet. If your wireless service provider supports this feature, you can view weather reports, check news or flight times, view financial information, and much more. The Web browser on your phone can display WAP-based content.
Minibrowser ■ Navigate the mobile internet Since your phone screen is much smaller than a computer screen, mobile internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using phone keys to navigate a WAP site. Phone keys • To browse the WAP site, scroll up or down. • Select a highlighted item. • To enter text, press # to switch text input modes, and then press 0-9. • To enter special characters, press *.
PC connectivity 13. PC connectivity ■ PC data transfer You can transfer data, such as music, photos, and videos, from your device to a compatible PC or from a compatible PC to your device using a data cable, Bluetooth, or infrared connectivity. For more information, see "Connectivity," p. 61. ■ Nokia PC Suite Nokia PC Suite software is available for this phone. Nokia PC Suite is a collection of powerful tools that you can use to manage your phone features and data.
Enhancements 14. Enhancements Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3 or AC-4 charger. Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer.
Enhancements Headsets • Boom Headset (HDB-4) • Headset (HS-5) • CDMA 2.
Reference information 15. Reference information This section provides information about your phone batteries, enhancements, chargers, safety guidelines, and technical information. Be aware that the information in this section is subject to change as batteries, chargers, and enhancements change. ■ Batteries and chargers Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
Reference information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps: Successful completion of the three steps is not a total assurance of the authenticity of the battery.
Reference information What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should: • Always keep the device more than 15.
Additional safety information ■ Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations.
Additional safety information ■ Certification information (SAR) This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
Additional safety information ■ Hearing aid compatibility (HAC) Your mobile device model complies with FCC rules governing hearing aid compatibility. These rules require an M3 microphone or higher value. The M-value, shown on the device box, refers to lower radio frequency (RF) emissions. A higher M-value generally indicates that a device model has a lower RF emissions level, which may improve the likelihood that the device will operate with certain hearing aids.
Additional safety information ■ Battery information This section provides information about battery charging times with the Compact Charger (AC-3), the Travel Charger (AC-4), talk-times, and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider.
Index Index NUMERICS C 1-touch dialing 45, 56 calendar make notes 74 open 73 options 73 receive, send notes 75 settings 75 view 74 call forward 70 log, see logs 36 register, see logs 36 settings 56 summary 58 timers 37 waiting 70 caller groups 43 ID 59 calling cards 57 calls answer 17 conference 16 duration 37 make 16 mute phone during 17 options during 18 restrictions 67 show times on display 58 silence 17 certification information (SAR) 96 change lock code 67 charger 65, 89 connect 14 times 98 clock s
Index contacts add 40 delete 46 edit 42 search 39 settings 43 view 39 countdown timer 80 currency converter 79 D data call duration 38 calls 58 transfer 86 date settings, see time and date dialed numbers 36 dialing codes 40 digital service 69 display settings 52 distribution lists 33 DTMF tones.
Index messages minibrowser, see minibrowser messages multimedia, see multimedia messages text, see test messages voice, see voice messages minibrowser 84 call duration 38 messages 35 missed calls 36 mobile web 84 multimedia messages 27 create 28, 29 delete 31 folders 27 read 29 reply 29 send 28 settings 32 mute phone 17 my phone number, display 46 memory 59 set up your 12 phone settings 59 predictive text 20 profiles 52 N safety guidelines 4 safety information battery 98 explosive environments 95 hearin
Index standby mode settings 53 standby time 98 start-up tone 60 stopwatch 81 T talk time 98 text entry changing language 19 predictive 20 standard 19 text messages create 23 delete 25 folders 22 read 23 reply 23 send 23 settings 26 templates 23 theme 54 time and date 55 timed profiles 52 timer countdown 80 interval 80 timers 80 to-do list options 78 send 78 tones 54 start-up 60 touch 59 TTY/TDD settings 65 turn phone on or off 15 102 U update service, automatic 56 V vibrating alert 54 voice commands 60
Nokia 2865 y Nokia 2865i Manual del Usuario Importante: Para prevenir cualquier malfuncionamiento y evitar daños, lea detalladamente este manual de instrucciones antes de conectar y operar este aparato. Conserve el manual para referencias futuras.
Parte Nº 9249438, Edición Nº 1 Copyright © 2006 Nokia. Todos los derechos reservados. Nokia, Nokia Connecting People, Nokia 2865, Nokia 2865i, Pop-Port y los logos Nokia Original Enhancements son marcas, registradas o no, de Nokia Corporation. Otros nombres de productos y compañías aquí mencionados pueden ser marcas o nombres, registrados o no, de sus respectivos propietarios. Nº de Patente EE.UU. 5818437 y otras patentes pendientes. Software Ingreso de Texto T9 Copyright ©1999-2006.
Contenido Contenido Para su seguridad............................................................................. 106 Bienvenido ........................................................................................ 109 1. Su teléfono ................................................................................ 110 2. Programar su teléfono .............................................................. 115 3. Ingreso de texto ........................................................................
Para su seguridad Para su seguridad Lea estas sencillas normas. El incumplimiento de ellas puede ser peligroso o ilegal. Lea todo el manual del usuario para obtener más información. ENCIENDA EL TELÉFONO EN FORMA SEGURA No encienda el teléfono donde el uso de teléfonos móviles esté prohibido o pueda causar interferencia o peligro. LA SEGURIDAD VIAL ANTE TODO Obedezca todas las leyes locales. Mantenga siempre las manos libres para maniobrar el vehículo mientras conduce.
Para su seguridad ACCESORIOS Y BATERÍAS Utilice sólo baterías y accesorios aprobados. No conecte productos incompatibles. NO MOJE EL TELÉFONO Su teléfono no es resistente al agua. Manténgalo seco. COPIAS DE SEGURIDAD Recuerde hacer copias de seguridad o llevar un registro por escrito de toda la información importante que guarda en el teléfono. CONEXIÓN CON OTROS DISPOSITIVOS Antes de conectar el teléfono con otro dispositivo, lea el manual del usuario para obtener instrucciones detalladas de seguridad.
Para su seguridad ■ Servicios de red Para utilizar el teléfono, debe contratar los servicios de un proveedor de servicios móviles. Muchas de las funciones de este dispositivo dependen de las funciones de la red inalámbrica para su funcionamiento. Es posible que estos servicios de red no estén disponibles en todas las redes o bien deberá hacer arreglos específicos con su proveedor de servicios antes de utilizar los servicios de red.
Bienvenido Bienvenido ¡Felicitaciones por la compra de su teléfono móvil Nokia! Su teléfono le brinda muchas funciones prácticas para el uso diario, como un altavoz, radio FM y más. Su teléfono también puede conectarse a una PC, computadora personal u otro dispositivo usando un cable de datos USB, infrarrojo o la tecnología Bluetooth inalámbrica. Soluciones de acceso Nokia tiene el cometido de hacer teléfonos móviles más manejables y amigables, incluso para los usuarios con dificultades.
Su teléfono 1. Su teléfono ■ Teclas y partes Puerto del audífono (1) Pantalla (2) Tecla de desplazamiento de cuatro sentidos y tecla de selección central (3) Tecla de selección derecha (4) Tecla Encender/Apagar y tecla Finalizar (5) Teclado (6) Conector Pop-Port™ (7) Micrófono (8) Puerto del cargador (9) Tecla Llamar (10) Tecla de selección izquierda (11) Conector de auricular 2.
Su teléfono ■ Modo standby Dependiendo de su proveedor de servicios móviles y del número de modelo de su teléfono, algunas o todas las siguientes teclas de selección pueden aparecer en el modo standby. El modo standby es la página de inicio e indica que su teléfono está en el modo inactivo. Intensidad de la señal (1): más barras indican una señal de red más fuerte. Menú (2): pulse la tecla de selección central para seleccionar esta opción.
Su teléfono ■ Menús del teléfono Las funciones de su teléfono están agrupadas según la función y se puede acceder a ellas mediante los menús principales. Cada menú principal tiene submenús y listas desde las cuales puede seleccionar o ver elementos y personalizar las funciones de su teléfono. Puede acceder a estos menús y submenús usando el método de desplazamiento o usando un acceso directo. Nota: Algunas funciones pueden no estar disponibles, dependiendo de su red.
Su teléfono Seleccione Menú > Opc. > Organizar. Desplácese a un menú, seleccione Mover. Use la tecla de desplazamiento para mover el menú a una nueva ubicación, seleccione OK. Puede repetir este procedimiento para personalizar su menú principal. Textos de ayuda Muchas de las funciones tienen descripciones breves (textos de ayuda) que puede ver en la pantalla. Para ver estas descripciones, desplácese hasta una función y espere unos quince segundos.
Su teléfono ■ Funciones Ir a El menú Ir a le permite cambiar la función de la tecla de selección izquierda en su teléfono de manera que pueda acceder rápidamente a las funciones que usa con más frecuencia desde el menú Ir a en el modo standby. Seleccionar opciones 1. Seleccione Ir a > Opc. > Selec.opciones. 2. Desplácese a las opciones que desea agregar. 3. Seleccione Marcar para agregar una opción o Desmar. para eliminar una opción. 4. Seleccione Listo cuando haya agregado todas las opciones deseadas. 5.
Programar su teléfono 2. Programar su teléfono ■ Antena Su dispositivo tiene una antena interior. Sujete el dispositivo como lo haría con cualquier otro teléfono, sobre el hombro y con la antena hacia arriba. Nota: Al igual que al usar otros dispositivos de transmisión por radio, no toque la antena si no es necesario mientras el dispositivo esté encendido.
Programar su teléfono Retirar la cubierta posterior Deslice la cubierta posterior hacia la parte inferior del teléfono, luego levante la cubierta y retírela. Retirar la batería Tras retirar la cubierta posterior, coloque su dedo en la ranura de agarre y levante la batería de su compartimento. Ranura de tarjeta UIM (CDMA SIM) Su teléfono puede tener una ranura de tarjeta UIM incorporada. Sin embargo, la tarjeta UIM no funciona con este modelo de teléfono. Deje vacía la ranura de la tarjeta UIM.
Programar su teléfono Volver a colocar la cubierta posterior 1. Fije la cubierta posterior en el teléfono con las lengüetas de la cubierta alineadas con las ranuras del teléfono. 2. Deslice la cubierta posterior hacia la parte superior del teléfono hasta que la cubierta quede segura en su sitio. Cargar la batería 1. Enchufe el transformador del cargador en un tomacorriente CA estándar. 2. Conecte el cargador al conector redondeado para clavija en la base del teléfono.
Programar su teléfono ■ Apagar o encender su teléfono 1. Para encender o apagar su teléfono, mantenga pulsada la tecla Finalizar por tres segundos. 2. Ingrese el código de bloqueo, si es necesario y seleccione OK. ■ Conectar el auricular Puede comprar un auricular compatible, como el HS-5, con su teléfono o por separado como accesorio. Consulte "Configuraciones de accesorios", pág. 173 para obtener más información. 1. Enchufe el conector del auricular al conector Pop-Port™ en la base de su teléfono.
Programar su teléfono ■ Realizar llamadas Teclado 1. Ingrese el número telefónico (incluyendo el código de área) y pulse la tecla Llamar. Para eliminar un carácter a la izquierda del cursor, seleccione Borrar. 2. Para finalizar la llamada, pulse la tecla Finalizar. Para cancelar el intento de llamada, seleccione Fin llam. Opción para guardar contacto 1. Ingrese el número telefónico (incluyendo el código de área) y seleccione Guardar, ingrese un nombre para el contacto y seleccione OK. 2.
Programar su teléfono ■ Contestar llamadas Contestar o silenciar una llamada 1. Para contestar la llamada, pulse la tecla Llamar o seleccione Contes. 2. Para rechazar la llamada, pulse la tecla Finalizar. Seleccione Silenciar para silenciar el tono del timbre. Seleccione Anular o no haga nada y la llamada se desvía eventualmente al correo de voz. Si su teléfono está programado en Silencio en el menú Perfiles, seleccione Anular y la llamada se desvía al correo de voz.
Programar su teléfono Opciones durante una llamada Muchas de las opciones que puede usar durante una llamada son servicios de red. Consulte a su proveedor de servicios móviles para obtener más información. Durante una llamada, seleccione Opc. y alguna de las siguientes opciones: Altavoz o Normal: para activar o desactivar el altavoz mientras está en una llamada. Agregar nva.llam.: para iniciar una llamada de multiconferencia. Consulte "Realizar una llamada de multiconferencia", pág.
Ingreso de texto 3. Ingreso de texto Puede usar dos métodos para ingresar texto y números: el modo estándar y modo de texto predictivo. ■ Modo estándar El modo estándar es la única forma de ingresar texto en la lista de contactos y para renombrar grupos de llamantes. Texto (Abc) • Pulse una tecla una vez para insertar la primera letra en la tecla, dos veces para la segunda letra, etc. Si hace una pausa, la última letra en la pantalla se acepta y su teléfono espera el próximo ingreso.
Ingreso de texto Signos de puntuación y caracteres especiales Mientras está en un cualquier pantalla de ingreso de texto, pulse la tecla * para mostrar caracteres especiales (mantenga pulsada la tecla * si el ingreso de texto predictivo está activado). Pulse nuevamente la tecla * para recorrer por todos los caracteres especiales. Desplácese para navegar por la lista de caracteres especiales. Cuando un carácter deseado está resaltado, seleccione Usar para insertar el carácter en su mensaje.
Ingreso de texto Mantenga pulsada: • la tecla * para mostrar caracteres especiales. Pulse nuevamente la tecla * para recorrer por todos los caracteres especiales. • la tecla numérica específica para ingresar un número. • # para seleccionar Config.editor > Modo numérico, Predicción activad. o Predicción desact. o Idioma escritura. ■ Cambiar entre mayúsculas/minúsculas y modo Pulse # para alternar entre mayúsculas, minúsculas y el modo oración, al igual que los modos de texto estándar y predictivo.
Mensajería 4. Mensajería Su teléfono puede crear y recibir mensajes de texto, multimedia, de voz y de miniexplorador. Consulte a su proveedor de servicios para obtener más información sobre los servicios de mensajería disponibles. ■ Mensajes de texto Mensajería de texto es un servicio de red. Consulte "Servicios de red", pág. 108, para obtener más información.
Mensajería Archivos: para ver la lista de mensajes guardados para referencias futuras. Plantillas: para seleccionar entre una colección de Plantillas preelaboradas, al crear mensajes de texto. Puede editar y personalizar las Plantillas precargadas. Mis carpetas: para crear y nombrar carpetas personales. Eliminar mensajes: para eliminar mensajes de una carpeta seleccionada o de todas las carpetas. Configuraciones de mensajes: para cambiar configuraciones para leer, escribir y enviar mensajes de texto.
Mensajería 1. Seleccione Mostrar para leer el mensaje de texto o Salir para eliminar la notificación. Desplácese para ver todo el mensaje, si es necesario. Cuando hay mensajes sin leer en su buzón de entrada, aparece como recordatorio en la esquina superior izquierda de la pantalla en el modo standby. 2. Seleccione Rpta. > Pantalla vacía, Texto original, Plantilla o una de las respuestas proporcionadas. 3. Escriba su respuesta con el teclado y seleccione Enviar.
Mensajería Opciones para leer mensajes Al leer un mensaje de texto, las siguientes opciones están disponibles: Eliminar: para eliminar el mensaje de texto. Estado mensaje: para ver los detalles del mensaje de texto. Usar información > Número, Dirección de e-mail o Dirección Web: seleccione Guardar para crear un nuevo contacto, seleccione Opc. > Agr. a contacto, Enviar mensaje o Llamar para otras opciones. Consulte "Guardar otros detalles", pág. 147, para crear y guardar detalles para un nuevo contacto.
Mensajería Eliminar una carpeta personalizada Sólo se pueden eliminar las carpetas creadas en Mis carpetas. Las carpetas Buzón de entrada, Buzón de salida, Elem.enviados, Borradores, Archivos y Plantillas están protegidas. Cuando elimina una carpeta, todos los mensajes en ésta también se eliminan. Seleccione Menú > Mensajería > Mensajes texto > Mis carpetas, desplácese a la carpeta que desea eliminar y seleccione Opc. > Eliminar carpeta > Sí o No.
Mensajería Configuraciones de mensajes de texto Opciones de envío Seleccione Menú > Mensajería > Mensajes texto > Configuraciones de mensajes > Opciones de envio y la configuración o configuraciones que desea cambiar: Prioridad > Normal o Urgente: para marcar la prioridad del mensaje. Informes de entrega: para recibir una nota confirmando la entrega de un mensaje de texto.
Mensajería Dependiendo de su red, puede recibir un mensaje que incluye una dirección de Internet a la cual puede ir para ver el mensaje multimedia. Las fotos se escalan para que se ajusten en la pantalla del teléfono. Su teléfono tiene un visor de mensaje multimedia para reproducir mensajes y un buzón de entrada multimedia para almacenar los mensajes guardados. Cuando haya guardado el mensaje multimedia, podrá usar la imagen como protector de pantalla o el sonido como un tono de timbre.
Mensajería Elem.guardados: para guardar los mensajes multimedia en Elem.guardados para usarlos en otro momento. Eliminar mensajes: para eliminar los mensajes multimedia de Buzón de entrada, Buzón de salida, Elem.enviados o Elem.guardados. Configuraciones de mensajes: para cambiar las configuraciones para los mensajes multimedia. Escribir y enviar mensajes multimedia 1. Seleccione Menú > Mensajería > Mensajes multimedia > Crear mensaje. 2. Escriba el mensaje usando el teclado.
Mensajería Leer y contestar mensajes multimedia Cuando recibe un mensaje multimedia, aparece en la pantalla junto con la pantalla de porcentaje la cual indica el progreso de descarga. Una vez que el mensaje está completamente descargado, y una notificación aparecen. 1. Para ver el mensaje, seleccione Mostrar. Para ver el mensaje en otro momento, seleccione Salir. Para ver un mensaje guardado, seleccione Menú > Mensajería > Mensajes multimedia > Buzón de entrada y el mensaje que desea ver. 2.
Mensajería Editar asunto: para editar el encabezado del asunto. Borrar texto: para borrar todo el texto de la diapositiva actual en su mensaje. Vista previa: para ver una vista previa del mensaje o presentación de diapositivas antes de su envío. Seleccione Parar para finalizar la vista previa. Seleccione Reprod. para reiniciar la vista previa o Atrás para regresar a la lista de opciones. Diapositiva ant.: para ir a la diapositiva anterior. Esta opción sólo aparece si hay una diapositiva previa.
Mensajería Opciones para leer mensajes Al leer un mensaje multimedia, las siguientes opciones están disponibles: Config.contraste: para ajustar el contraste de una imagen. Esta opción sólo está disponible al ver una imagen. Detalles: para mostrar los detalles de un archivo adjunto al cual se ha desplazado. Guardar imagen, Guardar clip sonido o Guardar videoclip: para guardar el archivo correspondiente en Galería. Debe abrir las imágenes, clips de sonido y videoclips antes de guardarlos.
Mensajería Eliminar todos los mensajes multimedia en una carpeta Seleccione Menú > Mensajería > Mensajes multimedia. > Eliminar mensajes > Buzón de entrada, Buzón de salida, Elem.enviados o Elem.guardados > Sí o No. Configuraciones de mensajes multimedia Puede cambiar la manera en que sus mensajes aparecen o se guardan.
Mensajería Mensajes multimedia entrantes Puede configurar cómo su teléfono recupera los mensajes multimedia entrantes. Seleccione Menú > Mensajería > Mensajes multimedia > Configuraciones de mensajes > Mensajes multimedia entrantes y alguna de las siguientes opciones: Recuperar: para que el teléfono recupere automáticamente todos los mensajes multimedia. Cuando llegan nuevos mensajes, se le notifica que ha recibido un nuevo mensaje multimedia.
Mensajería 3. Para agregar un contacto a esta lista, seleccione Nuevo y agregue los contactos uno a uno. Una lista de distribución sólo contiene los números telefónicos de los destinatarios. Agregar o eliminar contactos Seleccione Menú > Mensajería > Listas distribución > la lista de opciones: Nuevo: para agregar los contactos uno a uno u Opc., y su opción. Usar listas de distribución Seleccione Menú > Mensajería > Listas distribución, desplácese a la lista que desea modificar y seleccione Opc.
Mensajería Llamar y configurar su buzón de voz Tras almacenar el número del buzón de voz, mantenga pulsada la tecla 1. Cuando se conecte al correo de voz y el saludo pregrabado comience siga las instrucciones del servicio automatizado para configurar su buzón de voz. Escuchar su correo de voz Tras configurar su correo de voz, escuche sus mensajes. Puede: • mantener pulsada la tecla 1.
Mensajería 4. Refiérase a códigos de marcación e ingrese códigos de ser necesario. Use la información que guardó de "Anotar el número y procedimiento", pág. 139 Por ejemplo, si hace una pausa por cinco segundos tras conectarse a su correo de voz, ingrese "p" dos veces después del número del buzón de voz, por ejemplo, 2145551212pp. Para obtener más información sobre los códigos de marcación, consulte "Insertar códigos de marcación", pág. 146. 5.
Registro 5. Registro Registro guarda información sobre las últimas 30 llamadas perdidas, 30 llamadas recibidas o los 30 números marcados. También suma la duración total de todas las llamadas. Cuando la cantidad de llamadas excede el máximo, la llamada más reciente reemplaza la más antigua. Cuando vea las llamadas perdidas, recibidas o números marcados, las opciones del menú serán iguales: Hora de llamada: para mostrar la fecha y hora de la llamada. Enviar mensaje: para enviar un mensaje al número.
Registro ■ Horas de llamadas Puede realizar o recibir hasta cinco llamadas al o del mismo número y ver la hora en que cada una ocurrió. Su reloj debe estar configurado para que esta función funcione debidamente. 1. Al ver una llamada perdida, recibida o marcada, seleccione Opc. > Hora de llamada. 2. Desplácese hacia abajo para ver la hora de la llamada más reciente proveniente de este número. 3. Seleccione Atrás para regresar a la lista de opciones.
Registro Nota: Ciertos temporizadores, incluso el cronómetro general, pueden ser reprogramados cuando se actualicen los servicios o software. ■ Llamadas de datos o fax Llamadas de datos o fax son servicios de red. Consulte "Servicios de red", pág. 108, para obtener más información. Si su proveedor de servicios móviles admite esta función, puede ver el tamaño o duración de las llamadas de datos y fax enviadas y recibidas.
Registro Seleccione Menú > Registro > Llamadas del miniexplorador y alguna de las siguientes opciones: Últimos datos enviados: para ver el tamaño (KB) de los últimos datos de explorador enviados. Últimos datos de expl.recibidos: para ver el tamaño (KB) de los últimos datos recibidos. Todos datos enviados: para ver el tamaño (KB) de todos los datos de explorador enviados. Todos datos recibidos: para ver el tamaño (KB) de todos los datos de explorador recibidos.
Contactos 6. Contactos La lista de contactos puede almacenar hasta 500 contactos con varios números y notas de texto para cada contacto. La cantidad de números y entradas de texto que puede guardar podría variar, dependiendo de su longitud y la cantidad total de entradas en la lista de contactos. Seleccione Menú > Contactos y alguna de las siguientes opciones: Nombres: para ver la lista de contactos actualmente en su teléfono. Configuraciones: para cambiar las configuraciones de sus contactos.
Contactos ■ Agregar nuevos contactos Guardar un nombre y número 1. Ingrese el número telefónico que desea guardar. 2. Seleccione Guardar. 3. Ingrese el nombre y seleccione OK > Listo. Cuando ingresa un número, puede seleccionar Opc. > Insert.car.pausa para insertar un código de pausa u Opc. > Insert.car.espera para insertar un código de espera. Consulte "Insertar códigos de marcación", pág. 146, para obtener más información.
Contactos Guardar números múltiples Puede guardar diferentes tipos de números telefónicos por contacto. El primer número que guarda para cualquier entrada se programa automáticamente como el predeterminado, pero siempre se puede cambiar. 1. Desplácese hacia abajo para ver su lista de contactos. 2. Seleccione el contacto al que desea agregar un número telefónico. 3. Seleccione Detalles > Opc. > Agregar detalles > Número > General, Móvil, Casa, Trabajo o Fax. 4. Ingrese el número telefónico y seleccione OK.
Contactos Enviar tarjetas de negocios Puede enviar una tarjeta de negocios a un teléfono compatible u otro dispositivo portátil. 1. Desplácese hacia abajo para ver su lista de contactos. 2. Seleccione el contacto que desea enviar como tarjeta de negocios y Detalles. 3. Seleccione el número a usar y Opc. > Env.tarj. negocios > Via multimedia, Vía SMS, Vía Bluetooth o Vía infrarrojo. 4. Seleccione Nº predeterm. o Todos los detalles para enviar todos los detalles personales que han sido definidos. 5.
Contactos Cambiar tipo > General, Móvil, Casa, Trabajo o Fax: para cambiar el tipo de número. Agregar etiq.voz: para agregar una etiqueta de voz al contacto. Guardar en Galería: para guardar la imagen en su Galería. Env.tarj. neg. > Vía SMS, Vía Bluetooth, Vía infrarrojo o Vía multimedia: para enviar el contacto como una tarjeta de negocios a otro teléfono. Agregar al grupo: para agregar el contacto a un grupo de llamantes creado previamente.
Contactos Modificar un grupo de llamantes Seleccione Menú > Contactos > Grupos > Opc. > Detalles del grupo y alguna de las siguientes opciones: Nombre del grupo: para renombrar el grupo a su preferencia. Tono de grupo: para configurar el tono de timbre para el grupo. Imagen de grupo: para activar o desactivar el gráfico para el grupo de llamantes. Miembros del grupo: para agregar o eliminar nombres de contactos del grupo de llamantes.
Contactos Usar una etiqueta de voz 1. Seleccione y mantenga pulsada Nombr. 2. Cuando oiga varios bips y aparezca Hable ahora, suelte la tecla. 3. Pronuncie claramente la etiqueta de voz en el micrófono. Cuando el teléfono encuentra la etiqueta de voz, aparece una notificación y el teléfono marca automáticamente el número. Si el teléfono no encuentra el número o no reconoce la etiqueta de voz, No se encontró coincidencia aparece en la pantalla.
Contactos Cambiar los números de marcación rápida 1. Seleccione Menú > Contactos > Marcación rápida. 2. Desplácese al ingreso de Marcación rápida que desea cambiar y seleccione Opc. > Cambiar. 3. Ingrese el nuevo número o seleccione Buscar para recuperar un número de sus contactos, seleccione OK. 4. De ser necesario, ingrese el nombre del contacto para el número y seleccione OK para cambiar la asignación de tecla. Eliminar los números de marcación rápida 1. Seleccione Menú > Contactos > Marcación rápida.
Galería 7. Galería Puede guardar imágenes, videos, grabaciones, archivos de música y tonos de timbre en las carpetas en Galería y agregar nuevas carpetas a las ya existentes. Para descargar imágenes y tonos, use mensajería multimedia, mensajería de texto, sitios de Internet móvil o Nokia PC Suite. Su teléfono admite un sistema de administración de derechos digitales para proteger el contenido que haya adquirido.
Galería Para abrir una carpeta, desplácese a la carpeta y seleccione Abrir. Después de abrir la lista de carpetas y se desplace a un archivo, puede acceder al archivo o las opciones relacionadas con ese tipo específico de archivo. ■ Opciones de Galería Seleccione Menú > Galería > Opc. y alguna de las siguientes opciones: Eliminar carpeta: para eliminar una carpeta que ha creado. No puede eliminar una carpeta preconfigurada. Mover: para mover la carpeta seleccionada a otra carpeta.
Multimedia 8. Multimedia ■ Reproductor multimedia Con Rep.multim. puede descargar, ver y reproducir imágenes, audio y archivos de video compatibles e imágenes animadas de diferentes fuentes. Rep.multim. reproduce streaming de videos y audio desde un servidor de red. La funcionalidad streaming es un servicio de red y requiere que la red la admita. Consulte la disponibilidad, precios y tarifas de estos servicios con su operador de red o proveedor de servicios.
Multimedia Encender y apagar la radio 1. Conécte el teléfono a un auricular o soporte musical compatible. 2. Seleccione Menú > Multimedia > Radio. El número de la ubicación del canal, el nombre del canal de la radio (si guardó el canal) y la frecuencia del canal de la radio aparecen en la pantalla. Para usar las teclas gráficas , , o en la pantalla, desplácese hacia la izquierda o derecha a la tecla deseada y selecciónela. Si ya ha guardado canales de radio, seleccione canal que desea escuchar.
Multimedia Sintonizar y guardar un canal de radio Puede guardar una estación preconfigurada en cualquiera de las veinte ubicaciones en memoria. 1. Cuando la radio está activa, seleccione o para cambiar la frecuencia de la radio en intervalos de 0.1 MHz o mantenga seleccionada o para iniciar la búsqueda de canal. La búsqueda se detiene al encontrar un canal. 2. Para guardar el canal, seleccione Opc. > Guardar estación. 3.
Configuraciones 9. Configuraciones Utilice el menú Config. para personalizar las funciones de su teléfono. ■ Perfiles Perfiles define cómo su teléfono reacciona al recibir una llamada o un mensaje, cómo se producen los sonidos del teclado al pulsar una tecla y más. Las opciones para los timbres, los tonos del teclado y otras configuraciones para cada uno de los perfiles disponibles pueden permanecer con su configuración predeterminada o puede personalizarlas para ajustarlas a sus necesidades.
Configuraciones ■ Pantalla Su teléfono tiene una pantalla a color de alta resolución. Ahorro de energía Cuando esta función está activada la pantalla muestra sólo una pantalla simplificada tras un límite de tiempo. Seleccione Menú > Config. > Pantalla > Ahorro de energía > Activar o Desactivar Configuraciones del modo standby Puede seleccionar configuraciones para el modo standby en la pantalla. Imagen de fondo Puede programar una Imagen o un Conj.
Configuraciones Protect.pantalla > Imagen, Conj.diapositivas, Videoclip o Reloj digital: para seleccionar una imagen, video u otra opción para que funcione como su protector de pantalla. Límite de tiempo: para modificar el tiempo inactivo antes de que el protector de pantalla se active. Nota: El ahorro de energía se activa automáticamente tras el límite de tiempo del protector de pantalla para optimizar la vida útil de la batería.
Configuraciones Video de llamada entrante > Desactivar o Video de llamada... : seleccione un video para que aparezca cuando reciba una llamada entrante. Volumen del timbre: utilice la tecla de desplazamiento para configurar el volumen de su tono de timbre. Alerta vibrante: active el aviso de vibración para las llamadas. Seleccione Activar para activar el aviso de vibración.
Configuraciones Fecha Mostrar u ocultar la fecha Seleccione Menú > Config. > Hora y fecha > Fecha > Mostrar fecha o Ocultar fecha. Configurar la fecha Seleccione Menú > Config. > Hora y fecha > Fecha > Fijar fecha, ingrese la fecha y seleccione OK. Cambiar el formato Seleccione Menú > Config. > Hora y fecha > Fecha > Formato de fecha o Separador fechas y el formato de su elección. Actualización automática de fecha y hora La actualización automática de fecha y hora es un servicio de red.
Configuraciones Esta función no está diseñada para admitir solicitudes de ubicación para llamadas relacionadas. Comuníquese con su proveedor de servicios para obtener más información de cómo su teléfono cumple con las regulaciones gubernamentales en los servicios de llamadas de emergencia basados en ubicación.
Configuraciones Guardar información 1. Seleccione Menú > Config. > Llamada > Tarjeta de llamada. 2. Ingrese su código de seguridad y seleccione OK. Consulte "Seguridad", pág. 174. 3. Desplácese a la tarjeta de llamada de su preferencia y seleccione Opc. > Editar > Secuencia de marcado y una de los siguientes tipos de secuencias: Nº acceso + Nº teléfono + Nº tarj.: marque el número de acceso para la tarjeta de llamadas, el número telefónico, luego ingrese el número de tarjeta (+ PIN si es necesario).
Configuraciones Llamadas de datos y fax Las llamadas de datos y fax son un servicio de red. Consulte "Servicios de red", pág. 108. Si su operador de red admite esta función, puede configurar el dispositivo para que envíe o reciba llamadas de datos y fax cuando esté conectado con un dispositivo como un PDA o una PC. Recibir llamadas de datos o fax Para un mejor desempeño durante las llamadas de datos, coloque el dispositivo en una superficie inmóvil.
Configuraciones Tono de timbre para las llamadas sin ID Puede seleccionar un tono de timbre diferente para las llamadas que se reciben desde un número restringido o sin ID de llamante. Seleccione Menú > Config.> Llamada > Tono timbre llam.sin identificador > Activar o Desactivar. Consulte "Personalizar un perfil", pág. 158, para obtener más información sobre la selección de un tono de timbre.
Configuraciones Tonos al tacto Los tonos al tacto son tonos que se emiten al pulsar las teclas en el teclado de su teléfono. Puede usar los tonos al tacto o muchos servicios telefónicos automatizados, como banca electrónica y horarios de vuelos o para ingresar su número del buzón de voz y contraseña. Tonos DTMF se envían durante una llamada activa. Puede enviarlos manualmente desde el teclado de su teléfono o automáticamente al guardarlos en su teléfono.
Configuraciones ■ Comandos de voz Puede programar hasta cinco comandos de voz que le permiten el manejo manos libres de ciertas funciones del teléfono. Agregar una etiqueta de voz Antes de usar los Comandos de voz, debe primero agregar una etiqueta de voz a la función del teléfono. 1. Seleccione Menú > Config. > Comandos de voz. 2. Seleccione una función a la que desea agregar una etiqueta y seleccione Agregar. 3. Seleccione Iniciar y pronuncie claramente en el micrófono la etiqueta de voz.
Configuraciones ■ Conectividad También puede conectar su teléfono a una PC compatible usando un cable de datos USB, conexión inalámbrica Bluetooth o una conexión infrarroja y utilizar el teléfono como un módem para conectar con una PC. Recuerde hacer copias de seguridad de la información importante. Para obtener más información, consulte la ayuda en línea de Nokia PC Suite. Nokia PC Suite y todo el software relacionado se puede descargar de http://www.nokiausa.com/pcsuite.
Configuraciones Para asegurar la funcionalidad entre otros dispositivos que admiten la tecnología Bluetooth, solamente use accesorios aprobados por Nokia para este modelo. Verifique con los fabricantes de otros dispositivos la compatibilidad con este dispositivo. Puede que existan ciertas restricciones al utilizar la tecnología Bluetooth en algunas localidades. Consulte a las autoridades locales o al proveedor de servicios móviles.
Configuraciones Configuraciones de conectividad Bluetooth Para definir cómo su teléfono aparece en los otros dispositivos con conectividad Bluetooth , seleccione Menú > Config. > Conectividad > Bluetooth > Configuraciones Bluetooth y alguna de las siguientes opciones: Visibilidad de mi teléfono: seleccione Mostrar. visibil. para mostrar el teléfono a todos los dispositivos con conectividad Bluetooth,Temp. visibil.
Configuraciones Recibir una transferencia de datos Cuando tiene una conexión de tecnología Bluetooth activa en su teléfono, puede recibir notas, tarjetas de negocios, videos y otros tipos de transferencias de datos de otro dispositivo con conectividad Bluetooth. Cuando recibe una transferencia de datos, suena una alarma y un mensaje aparece en la pantalla. Para ver inmediatamente el elemento transferido desde el modo standby, seleccione Mostrar. Para ver el elemento en otro momento, seleccione Salir.
Configuraciones 3. Desplácese a un USB device (dispositivo USB) y haga clic en OK. La ventana emergente Safe to Remove Hardware (Seguro retirar Hardware) aparece con el siguiente mensaje “The ‘USB Device’ device can now be safely removed from the system (Seguro retirar el "Dispositivo USB" del sistema). 4. Haga clic en OK. ■ Configuraciones de accesorios El menú de configuraciones de accesorios muestra ciertas opciones sólo si el teléfono está o ha estado conectado a un tipo de accesorio compatible.
Configuraciones Cargador Seleccione Menú > Config. > Accesorios > Cargador y alguna de las siguientes opciones: Perfil predeterminado: seleccione el perfil que desea que se active automáticamente al conectar el cargador al teléfono. Luces: Activar o Automáticas para que las luces se mantengan siempre encendidas o para que se apaguen automáticamente tras unos segundos. ■ Seguridad Para acceder a Seguridad por primera vez, debe ingresar el código de bloqueo predeterminado.
Configuraciones Si selecciona Bloquear ahora, debe ingresar el código de bloqueo antes de que su teléfono funcione como de costumbre. Cuando el código de bloqueo se acepta, su teléfono funciona debidamente. Llamada no permitida aparece si trata de realizar una llamada con el teléfono bloqueado. Para contestar una llamada con el bloqueo del teléfono activado, seleccione Contes. o pulse la tecla Llamar.
Configuraciones Restricciones de llamadas Restricciones de llamadas le permite bloquear o permitir números para las llamadas entrantes y salientes. 1. Seleccione Menú > Config. > Seguridad. 2. Ingrese el código de bloqueo y seleccione OK. 3. Seleccione Restricciones de llamadas y el tipo de llamadas que desea restringir: Restringir llamadas salientes: para configurar restricciones para realizar llamadas. Restringir llamadas entrantes: para configurar restricciones para recibir llamadas. 4.
Configuraciones ■ Configuraciones de aplicación El menú Config.aplicación cambia las configuraciones de juegos y aplicaciones. Seleccione Menú > Config. > Config.aplicación y alguna de las siguientes opciones: Sonidos de aplicaciones > Activar o Desactivar: reproduce sonidos durante una aplicación. Luces de aplicaciones > Aplicación definida o Predeterminadas: activa las luces durante una aplicación. Vibración de aplicación > Activar o Desactivar: el teléfono vibra durante una aplicación.
Configuraciones Sólo análogo: puede realizar y recibir llamadas solamente en una red analógica. Sólo digital: puede realizar y recibir llamadas solamente en una red digital. ■ Servicios de red Las siguientes funciones son servicios de red. También, consulte "Servicios de red", pág. 108. Guardar un código de función Configuración de opciones de la red le permite activar los servicios de red en su teléfono usando los códigos de función recibidos de su proveedor de servicios. 1. Seleccione Menú > Config.
Configuraciones 2. Seleccione Activar. 3. Ingrese el número al cual sus llamadas, datos u otra información serán desviados y seleccione OK. Para cancelar, seleccione Menú > Config. > Servicios de red > Desvío de llamadas > Cancelar todos los desvíos. Si selecciona Cancelar todos los desvíos, puede afectar la recepción de sus mensajes de correo de voz. Consulte a su proveedor de servicios para obtener más detalles.
Configuraciones ■ Detalles del teléfono Para ver los detalles actuales de su teléfono, seleccione Menú > Config. > Detalles teléfono y alguna de las siguientes opciones: Detalles usuario: muestra los detalles actuales del número telefónico. Detalles versión: muestra el hardware, software e información de versión de explorador del teléfono. Detalles sistema: muestra la red digital usada por el teléfono. Detalles de icono: muestra los iconos usados.
Organizador 10. Organizador Su teléfono tiene funciones para ayudarle a organizar su vida cotidiana, incluyendo una alarma, agenda, calculadora, temporizador y cronómetro. ■ Alarma Programar una alarma La alarma se basa en el reloj del teléfono. Una alarma suena a la hora que especifíque aún cuando el teléfono está apagado. 1. Seleccione Menú > Organizador > Alarma > Hora de alarma. 2. Ingrese la hora de alarma en el formato hh:mm y seleccione OK. 3.
Organizador Configurar el tono de la alarma Para configurar que tono se reproduce cuando la alarma suena, seleccione Menú > Organizador > Alarma > Tono de alarma > Estándar, Radio o Abrir galería. Si programa su alarma en Radio, use un accesorio que admita estéreo FM. Configurar el límite de tiempo de pausa Puede configurar el Límite de tiempo de pausa para la alarma. En el modo standby, seleccione Menú > Organizador > Alarma > Límite de tiempo de pausa y un tiempo para la pausa.
Organizador Opciones de la agenda Seleccione Menú > Organizador > Agenda > Opc.y alguna de las siguientes opciones: Vista semana: para ver su agenda por semanas. Para regresar a la vista mensual, seleccione Atrás, desde Vista semana. Crear nota: para crear una nota para la fecha seleccionada. Ir a fecha: para ir a una fecha específica. Ingrese la fecha (por ejemplo, 15/07/2006) y seleccione OK. Ir a hoy: para ir a la fecha actual. Configuraciones: para modificar las configuraciones de agenda.
Organizador Ver las notas de agenda (notas del día) Puede ver las notas de agenda para un día. 1. Seleccione Menú > Organizador > Agenda. 2. Desplácese a la fecha que desea ver o seleccione Opc. > Ir a fecha. Los días con notas aparecen en negritas. 3. Seleccione Ver para ver la lista de notas para ese día. Para ver una nota en particular, desplácese a la nota y seleccione Ver de nuevo. Si no hay notas para la fecha, seleccione Agr.nota para crear una nueva nota de agenda.
Organizador Modificar las configuraciones de la agenda Seleccione Menú > Organizador > Agenda > Opc. > Configuraciones y alguna de las siguientes opciones: Fijar fecha: ingrese la fecha actual y seleccione OK. Aparece sólo cuando no se ha fijado la fecha. Configurar la hora: ingrese la hora actual y seleccione OK. Aparece sólo cuando no se ha fijado la hora. Zona horaria: seleccione su zona horaria actual. Formato de fecha: seleccione su formato de fecha preferido.
Organizador Idioma escritura: para seleccionar el idioma que desea utilizar. Predicción activad.o Predicción desact.: para activar o desactivar el ingreso de texto predictivo. Coincidencias: para ver las coincidencias en el diccionario de texto predictivo para la palabra que desea usar. Esta opción aparece sólo cuando el texto predictivo está activado. Enviar una nota Seleccione Menú > Organizador > Notas, desplácese a la nota que desea enviar y seleccione Opc. > Enviar nota > Enviar como mens.
Organizador Para escribir notas adicionales, seleccione Menú > Organizador > Lista de tareas > Opc. > Agregar. Ingrese el asunto y seleccione Guardar > Alta, Media o Baja. Cuando crea una nota de tareas, las siguientes opciones están disponibles: Insertar emoticón: para insertar un emoticón en su mensaje. Insertar palabra o Editar palabra: para ingresar o editar el texto de una nueva palabra que posiblemente no aparezca en el diccionario de texto predictivo.
Organizador Opciones para la lista de tareas Seleccione Menú > Organizador > Lista de tareas > Opc. alguna de las siguientes opciones: Agregar: para crear una nueva nota en la lista de tareas. Eliminar: para eliminar la nota de lista de tareas seleccionada. Nota realizada o Nota no realizada: indica si la nota de tareas está o no realizada. Usar detalle: para utilizar un detalle en la nota. Ordenar fecha lím. o Ordenar prioridad: para clasificar la lista de tareas por fecha o prioridad.
Organizador ■ Convertidor de divisas Es posible convertir divisa a moneda o vice versa, directamente del modo standby o del menú Calculadora. Nota: Cuando cambie la moneda base, deberá ingresar las nuevas tarifas puesto que todos los tipos de cambio ingresados previamente son configurados en cero. 1. Seleccione Menú > Organizador > Calculadora > Opc. > Tasa de cambio > Unid.extranjeras a nacionales o Unid.nacionales a extranjeras. Unid.
Organizador Para programar el temporizador normal, haga lo siguiente: 1. Seleccione Menú > Organizador > Temporiz. > Temporizador. 2. Ingrese la hora (en el formato hh:mm:ss) y seleccione OK. 3. Ingrese una nota para el temporizador y seleccione Iniciar. y el temporizador (en el formato hh:mm:ss) aparecen en el modo standby cuando la cuenta regresiva está funcionando. Cuando el tiempo vence, el teléfono suena una alarma, vibra y destella sus luces. Si está en el modo standby, seleccione Reiniciar o Salir.
Organizador 6. Seleccione un tiempo existente guardado yEditar periodo, Agregar periodo, Eliminar periodo o Iniciar temporizad. Para usar un temporizador para intervalos: 1. Seleccione Menú > Organizador > Temporiz. > Temporiz.interv. y alguno de los temporizadores para intervalos programados. Agregar temporiz. es la única opción si no ha programado algún temporizador para intervalos. 2. Seleccione Iniciar temporizad., Ver temporizador, Editar temporizad., Agregar temporiz. o Eliminar temporiz.
Organizador Guardar un tiempo Para guardar un tiempo medido mientras el reloj sigue funcionando, seleccione Parar > Guardar, ingrese un nombre para el tiempo medido y seleccione OK. Si no ingresa un nombre, el tiempo total se usa como el título predeterminado para la vuelta o tiempo de vueltas. Opciones de cronómetro Seleccione Menú > Organizador > Cronómetro y alguna de las siguientes opciones: Continuar: para que continúe midiendo el tiempo y regresar a la pantalla del cronómetro.
Extras 11. Extras Es posible que su proveeder móvil pueda proporcionarle funciones extras en el menú Extras. En caso de que no ser así, es posible que no vea este elemento de menú. ■ Juegos Seleccione Menú > Extras > Juegos para mostrar los juegos en su dispositivo. Seleccione Opc. para ver opciones adicionales. ■ Colección Seleccione Menú > Extras > Colección > y seleccione una aplicación. Seleccione Opc. para ver opciones adicionales. Una aplicación puede tardar unos segundos en cargar.
Miniexplorador 12. Miniexplorador Web móvil es un servicio de red. Consulte "Servicios de red", pág. 108, para obtener más información. Su teléfono tiene un explorador Web móvil incorporado que puede usar para conectarse a servicios selectos en la Internet móvil. Si su proveedor de servicios móviles admite esta función, puede ver pronósticos del tiempo, las noticias u horarios de vuelo, información financiera y mucho más. El explorador Web de su teléfono puede mostrar contenido basado en WAP.
Miniexplorador ■ Conexión al Internet móvil Seleccione Menú > Web móvil. Tras una breve pausa, su teléfono trata de conectarse a la página de inicio de su proveedor de servicios. Si aparece un mensaje de error, es posible que su teléfono no esté configurado para la exploración. Consulte a su proveedor de servicios para asegurarse de que su teléfono está debidamente configurado.
Miniexplorador Realizar una llamada de emergencia mientras está en línea Puede finalizar su conexión de datos y realizar una llamada de emergencia. 1. Para terminar la conexión de Internet móvil, pulse la tecla Finalizar. 2. Pulse la tecla Finalizar tantas veces como sea necesario para borrar la pantalla y preparar el teléfono para las llamadas. 3. Ingrese el número de emergencia de la localidad en la que se encuentra. Los números de emergencia pueden variar en cada localidad. 4. Pulse la tecla Llamar.
Conectividad PC 13. Conectividad PC ■ Transferir datos PC Puede transferir datos, como música, fotos y videos desde su dispositivo a una PC compatible o desde una PC compatible a su dispositivo usando un cable de datos, la conectividad Bluetooth o infrarroja. Para obtener más información, consulte "Conectividad", pág. 169 ■ Nokia PC Suite El software Nokia PC Suite está disponible para este teléfono.
Accesorios 14. Accesorios Verifique el modelo del cargador antes de usarlo con este dispositivo. Este dispositivo está diseñado para su uso con cargadores AC-3 o AC-4. Advertencia: Utilice sólo baterías, cargadores y accesorios aprobados por Nokia para este modelo particular de teléfono. El uso de cualquier otro tipo de batería, cargador o accesorio puede anular cualquier aprobación o garantía y podría resultar peligroso.
Accesorios Auriculares • Auricular compacto (HDB-4) • Auricular (HS-5) • Auricular CDMA 2,5 mm (HS-9) • Auricular estéreo fashion (HS-3) • Auricular estéreo clásico (HS-23) • Auricular Bluetooth (HS-26W) • Auricular Bluetooth (BH-200, BH-300, BH-600, BH-700, BH-800, BH-900) Otros • Audífono inductivo (LPS-4) • Adaptador TTY (HDA-10) • Equipo para auto inalámbrico (CK-7Wi) • Equipo enchufable manos libres para auto (HF-3) • Enchufe manos libres inalámbrico para auto (HF-6W) 199
Información de referencia 15. Información de referencia Esta sección provee información sobre las baterías, accesorios, cargadores, guías de seguridad e información técnica para su teléfono. Dicha información está sujeta a cambios a medida que los cargadores, baterías y accesorios cambian. ■ Baterías y cargadores Su dispositivo recibe alimentación eléctrica a través de una batería recargable.
Información de referencia Si deja la batería en lugares calientes o fríos, como en vehículo completamente cerrado en verano o en invierno, reducirá su capacidad, vida útil y su rendimiento de carga. Intente mantener la batería siempre entre los 15 °C y 25 °C (59 °F y 77 °F). Un dispositivo con la batería demasiado fría o caliente puede dejar de funcionar temporalmente, aun cuando la batería se encuentre completamente cargada.
Información de referencia 3. Raspe el lado de la etiqueta para revelar un código de 20 dígitos, por ejemplo 12345678919876543210. Gire la batería de tal forma que los números miren hacia arriba. El código de 20 dígitos se lee empezando con el número de la fila superior seguido por la fila inferior. Confirme la validez del código de 20 dígitos siguiendo las instrucciones en www.nokia.com/battery.
Cuidado y mantenimiento Cuidado y mantenimiento Su dispositivo es un producto de diseño y fabricación excelentes y debe tratarse con cuidado. Las sugerencias que se incluyen a continuación le ayudarán a proteger la cobertura de su garantía. • Mantenga el dispositivo seco. La lluvia, la humedad y los líquidos contienen minerales que pueden oxidar los circuitos electrónicos. Si el dispositivo se moja, extraiga la batería y espere que el dispositivo se seque por completo para volver a colocarla.
Información adicional de seguridad Información adicional de seguridad Su dispositivo y accesorios pueden contener partes pequeñas. Manténgalos fuera del alcance de los niños. ■ Entorno operativo Respete la normativa especial vigente en la zona donde se encuentra y siempre apague su dispositivo cuando esté prohibido utilizarlo o cuando su uso pueda causar interferencia o peligro. Use el dispositivo en su posición normal de funcionamiento.
Información adicional de seguridad Marcapasos Los fabricantes de marcapasos recomiendan mantener una distancia mínima de 15,3 centímetros entre un teléfono móvil y un marcapasos, a fin de evitar posibles interferencias. Estos consejos provienen de la investigación independiente y recomendaciones de la Investigación tecnológica en telefonía móvil (Wireless Technology Research).
Información adicional de seguridad ■ Entornos potencialmente explosivos Apague el dispositivo en áreas donde puedan producirse explosiones y obedezca todas las señales e instrucciones. Las zonas con potencial explosivo incluyen las zonas donde existen avisos reglamentarios requiriéndole que apague el motor de su vehículo. Las chispas en estas zonas pueden producir explosiones o incendios que pueden resultar en daño corporal o incluso la muerte.
Información adicional de seguridad ■ Información de certificación (SAR-TAE) Este dispositivo cumple las normas sobre exposición a ondas de radio. Su dispositivo móvil es un radiotransmisor y radiorreceptor. Está diseñado para no sobrepasar los límites recomendados por las normas internacionales. Estas normas fueron desarrolladas por la organización científica independiente ICNIRP e incluyen un margen de seguridad diseñado para garantizar la seguridad del público, independientemente de la edad y salud.
Información adicional de seguridad ■ Compatibilidad con aparatos auditivos (HAC) Su dispositivo móvil cumple con los requerimientos FCC sobre la compatibilidad con aparatos auditivos. Estas normas requieren de un micrófono M3 o de mayor valor. El valor-M, que figura en el empaque, se refiere a niveles bajos de emisiones de radiofrecuencia (RF).
Información adicional de seguridad ■ Información sobre las baterías Esta sección provee información sobre los tiempos de carga para la batería con el cargador compacto (AC-3), el cargador rápido (AC-4), tiempos de conversación y tiempos de reserva. Dicha información está sujeta a cambios. Para obtener más información, comuníquese con su proveedor de servicios.
Índice Índice A accesorios 173 aprobados 198 actualización de servicio, automática 163 agenda abrir 182 configuraciones 185 crear notas 183 opciones 183 recibir, enviar notas 184 ver 184 alarma 181 repetir 181 alerta vibrante 161 altavoz 120 antena 115 aplicaciones colección 193 configurar 177 auricular conectar 118 configuraciones 173 automática actualización de hora y fecha 162 actualización de servicio 163 automático bloqueo de teclas 166 remarcado 163 automatizar correo de voz 139 ayuda activación de t
Índice configuraciones 149 editar 148 ver 145 contestar llamadas 120 convertidor de divisa 189 cronómetro 191 cualquier tecla contesta 163 cubierta posterior retirar 116 volver a colocar 117 D datos duración de llamada 143 llamadas 165 transferir 197 E encender o apagar teléfono 118 escuchar correo de voz 139 etiquetas de voz asignar 150 eliminar 151 modificar 151 usar 151 extras 193 F finalizar pausa 182 funciones Ir a 114 indicadores e iconos 111 información de certificación (SAR) 207 información de
Índice desvío 178 duración 142 mostrar duración en pantalla 165 opciones 121 realizar 119 registro 141 restricciones 176 resumen 165 silenciar 120 silenciar teléfono durante una llamada 120 llamadas de emergencia 196, 206 llamadas de fax 143, 165 llamadas de multiconferencia 119 llamadas perdidas 141 llamadas recibidas 141 llamante grupos 149 ID 166 M marcación rápida 151, 163 configurar 151 memoria teléfono 166 verificar estado 166 mensajes miniexplorador, consulte mensajes del miniexplorador multimedia,
Índice R radio 155 realizar llamadas 119 red configuraciones 177 servicios 108, 178 registro borrar 142 repetir alarma 181 reproductor multimedia 155 restaurar configuraciones de fábrica 179 S seguridad configuraciones 174 servicio analógico 177 servicio digital 177 silenciar llamadas 120 silenciar teléfono 120 sistema de ubicación global 162 soluciones de acceso 109 standby modo 111 T tarjetas de llamadas 163 tarjetas de negocios 148 tecla de navegación 166 teclas rápidas 111 teléfono bloquear 174 cuida
Notas 214
Notas 215
Notas 216