User manual

68 Copyright © 2004 Nokia
Note: If you select Line 2 but have not subscribed to this network service,
you will not be able to place calls. However, calls on both lines can be
answered regardless of the selected line.
2 Select either Line 1 or Line 2.
A message appears in the display confirming your selection.
Note: If supported by your SIM card, you can prevent the line selection by
using the Lock option.
• PHONE SETTINGS
Set the display language
1 From the menus, select Settings > Phone settings > Phone language.
2 Select the language of your choice.
Phone memory
1 From the menus, select Settings > Phone settings > Memory status.
After a brief pause, Free memory, Used memory, Contacts, Text messages,
Multimedia msgs., Gallery, Organizer, and Applications appear in the display.
2 Scroll through the list to view the memory associated with each item.
Note: For more information, see “Shared memory” on page 3.
Activate or deactivate automatic Keyguard
When the Keyguard is on, calls still may be possible to the official emergency number
programmed into your phone. Enter the emergency number and press the Send key.
You can set the keypad of your phone to lock automatically after a preset time
delay (from 10 seconds to 60 minutes). When the preset delay expires, the keypad
locks automatically.
1 From the menus, select Settings > Phone settings > Automatic keyguard >
On or Off.
2 If you selected On, Set delay appears in the display.
3 Enter the delay (in mm:ss format) and select OK.
Activate or deactivate cell info display
Note: Cell info display is network-dependent and may not work the same in
all networks. Contact your service provider for availability.