User manual

Table Of Contents

Settings (Menu 4)

4. Press Done > Yes to save the changes.

■ Call settings

Set location info sharing

Location info sharing is a network service. See Network services, 6 for more information.

If your wireless service provider supports this feature, then location info sharing allows

the phone to share position information over the network. For calls to emergency

numbers, this position information may be used by the emergency operator to

determine the position of the phone. The functionality of this feature is dependent on

the network, satellite systems, and the agency receiving the information. It may not

function in all areas or at all times.

At the start screen, select Menu > Settings > Call settings > Location info sharing >

Emergency or On > OK > OK.

Emergency—This is the phone default profile. The phone’s location information is shared

only during an emergency call to the official emergency number programmed into your

phone. The phone screen displays in the upper left hand corner of the start screen.

On—The phone location information is shared with the network whenever the phone is

powered on and activated. The screen displays in the upper left hand corner of the

start screen.

Note: The location information sharing feature is available in the Nokia 3205

phone, but it is not available in the Nokia 3205n phone.

Note: Location information will always be shared with the network during

emergency calls to the official emergency number programmed into the phone,

regardless of which setting is selected. After placing an emergency call the

phone remains in emergency mode for five minutes. During this time, the

location information will be shared with the network. For more information,

see Additional safety information, 100.

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key except

the power key, Left selection key, Right selection key, or End key.

At the start screen, select Menu > Settings > Call settings > Anykey answer and press

Select > On or Off and press Select.