User manual

55 Copyright © Nokia 2004
Settings (Menu 4)
Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the phone
number) and phone number you want to dial, then card number (+ PIN if required)
5. Enter the required information (access number or prefix and card number) and press
OK to confirm your entries.
6. Scroll to Card name and press Select.
7. Enter the card name and press OK.
Note: Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a call
using your calling card.
1. At the start screen, select Menu > Settings > Call settings > Calling card and
press Select.
2. Enter your lock code and press OK. (See Change the lock code, 65.)
3. Scroll to the calling card of your choice, select Options > Select > OK.
4. Press the End key to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1), that your calling card may require when you
make a calling card call.
See your calling card for instructions.
5. Press and hold the Send key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, press OK.
Receive data or fax calls
Data or fax calls is a network service. See Network services, 6 for
more information.
If your wireless service provider supports this feature, then you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface with
the keypad facing downward. Do not move the phone by holding it in your hand during
a data call.