User manual

Table Of Contents

■ Voice commands

You can set as many as five voice commands, which allow handsfree operation of

certain phone features.

Add a voice tag

Before using voice commands, you must first add a voice tag to the phone function.

1. At the start screen, select Menu > Voice > Voice commands and press Select.

2. Scroll to the phone function you wish to tag (Profiles, Voice mailbox, Radio, Infrared,

Voice recorder or Call log) and press Select.

3. If necessary, scroll to an option associated with that function and press Select.

4. Press Options > Add command and press Select.

5. Press Start, and speak the voice tag clearly into the microphone.

Note: Do not press Quit unless you want to cancel the recording.

The phone replays and then saves the recorded tag. The icon appears next to

commands which have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a phone function, you can issue a command

by speaking the voice tag.

1. Press and hold Contacts (or Go to).

2. When Please speak now appears, pronounce the voice tag clearly into the

microphone.

When the phone finds the voice tag, Found: appears, and the phone plays the

recognized voice tag through the ear piece. The function you requested is activated.

Options

After you have associated a voice tag to a command, you can choose one of the

following options:

• Select Playback to listen to the voice command tag.

• Select Change to change the voice command.

• Select Delete to erase the voice command tag.