User manual
Table Of Contents
- Contents
- Overview of functions
- Keys and connectors
- Keys
- 1
- 1 Power key
- 2 Volume key
- 3 Music key
- a) Short press and long press of the music key The first short press of the music key will take you to the music menu.
- b) Once you are in the music menu, a short press switches or scrolls through the menu choices (Music player, Radio, and Switch music off). The choices are highlighted as you move or switch from one menu choice to the next.
- c) A long press on a highlighted choice selects and starts the music player or radio, or switches the music off.
- 4 Four-way scroll key
- 5 Selection keys and
- 6 Send and End keys
- Connectors
- Standby mode
- 1 Indicates the wireless system that is in use.
- 2 Shows the signal strength of the cellular system at your current location. The higher the bar, the stronger the signal.
- 3 Shows the battery charge level. The higher the bar, the more power in the battery.
- 4 The left selection key in standby mode is Menu.
- 5 The right selection key in standby mode is Contacts.
- 6 When the music player is on, the track title is shown. When the radio is on, the radio station is shown.
- Screen saver
- Wallpaper
- Icons in standby mode
- Wrist strap
- Headset
- Attach and use supplied cables
- Disconnect the phone from the PC
- Keys
- Install the SIM card and battery
- 1 Before you install the SIM card, make sure the phone is switched off.
- 2 Remove the back cover of the phone with the back of the phone facing you.
- 3 Press the back cover release button (1) and slide the cover forward.
- 4 Slide the SIM card holder down (3) and pull up to open (4).
- 5 Insert the SIM card into the SIM card holder (5).
- 6 Close the SIM card holder (6) and push up to lock (7).
- 7 Insert the battery (8) with the gold contacts on the battery aligned with the gold contacts in the battery slot.
- 8 To replace the back cover (9), insert the locking catches on the back cover in the corresponding slots in the phone, and slide the cover until it locks into place.
- Remove and install the memory card
- 1 Make sure the phone is switched off.
- 2 With the back of the phone facing you, slide the cover open and remove the battery. See step 1 in Install the SIM card and battery.
- 3 To remove the memory card, press the memory card release button (1) and lift the card off (2).
- 4 To install the memory card, gently press the memory card in place (3) while pressing the memory card release button (4). Make sure that the gold contacts of the card are facing down.
- 5 Replace the battery and cover.
- Charge the battery
- Switch the phone on and off
- Keypad lock (keyguard)
- Change the covers
- 1 Remove the back cover.
- 2 To remove the front cover, gently pull the cover on both sides (1) and remove the cover starting from the top (2).
- 3 Remove the key mat from the front cover and replace on the phone (3).
- 4 To replace the front cover, place the catches on the lower part of the cover into the corresponding holes in the phone (4); then gently press the cover into place (5).
- 5 Replace the back cover.
- Listen to music
- Listen to the radio
- Make a call
- 1 The number keys are located on the right side of the keyboard. Key in the phone number, including the area code. If you key in an incorrect number, press Clear to delete it.
- 2 Press to call the number.
- 3 Press to end the call or to cancel the call attempt.
- Make a call using the Contacts list
- Last number redialing
- Call your voice mailbox
- 1-touch dialing
- Vanity dialing
- Voice dialing
- Add a voice tag to a contact
- 1 At the start screen, scroll to the name you want to give a voice tag.
- 2 Press Details, then Options.
- 3 Press Select.
- 4 Press Start.
- 5 Speak clearly into the microphone.
- 6 The phone automatically stops recording, then saves and replays the voice tag.
- 7 If the recording is not successful, your phone displays Voice system error. Press Options, scroll to Add voice tag, and repeat steps 3-5.
- Notes about voice tags
- Make a call using a voice tag
- Listen to a voice tag
- Change or delete a voice tag
- Add a voice tag to a contact
- Answer or decline an incoming call
- Call waiting
- Make a conference call
- 1 Make a call to the first participant.
- 2 To make a call to a new participant, press Options and select New call.
- 3 Key in or search the memory for the phone number of the new participant and press Call. The first call is automatically put on hold.
- 4 When the new call has been answered, join the first participant in the conference call. Press Options and select Conference.
- 5 To add a new person to the call, repeat steps 2 to 4.
- 6 To have a private conversation with one of the participants:
- 7 To end the conference call, press .
- Options during a call
- Scroll to a menu
- 1 To access the menu, press Menu.
- 2 Scroll with or through the menu and select, for example, Settings by pressing Select.
- 3 If the menu contains submenus, select the one you want, for example Call settings.
- 4 If the selected submenu contains further submenus, repeat step 3. Select the next submenu, for example, Call forwarding.
- 5 Select the setting of your choice.
- 6 Press Back to return to the previous menu level, and Exit to exit the menu.
- Menu shortcuts
- Messages (Menu 1)
- Text messages
- Write and send messages
- 1 Press Menu, and select Messages, Text messages and Create message.
- 2 Key in a message. See Write text. To insert text templates or a picture into the message, see Templates.
- 3 To send the message, press Options and select Send.
- 4 Enter the recipient’s phone number or search for the phone number in Contacts.
- 5 Press OK to send the message.
- Write text
- Tips for writing text
- Write and send messages
- Options for sending a message
- Write and send e-mail
- 1 Press Menu, and select Messages, Text messages and Create e-mail.
- 2 Key in the recipient’s e-mail address or search for it Contacts and press OK.
- 3 If you wish, you can key in the subject for the e-mail and press OK.
- 4 Key in the e-mail message. See Write text. The total number of characters that you can key in is shown on the top right of the display. The e-mail address and subject are included in the total number of characters.
- 5 To send the e-mail, press Options and select Send e-mail. If you have not saved the settings for sending e-mails, the phone asks for the number of the e-mail server.
- Read and reply to a message
- 1 Press Show to view the new message, or press Exit to view it later.
- 2 If more than one message has been received, select the one that you want to read. An unread text message is indicated by in front of it and a picture message that has not been viewed is indicated by .
- 3 While reading or viewing the message, press Options.
- 4 Select Reply to reply to a message. Select Original text to include the original message in the reply, or select a standard answer (to be included in the reply, or select Empty screen.
- 5 Press Options, select Send, and press OK to send the message to the displayed number.
- Inbox and Sent items folders
- Templates
- Insert a text template into a message or an e-mail
- Insert a picture into a text message
- Archive folder and my folders
- Multimedia messages
- Write and send a multimedia message
- 1 Press Menu, and select Messages, Multimedia msgs. and Create message.
- 2 Key in a message. See Write text.
- 3 To view the message before sending it, press Options and select Preview.
- 4 To send the message, press Options and select Send to number or Send to e-mail.
- 5 Enter the recipient’s phone number (or e-mail address) or search for it in Contacts. Press OK and the message is moved to the Outbox folder for sending.
- Read and reply to a multimedia message
- Inbox, Outbox, Saved and Sent items folders
- Multimedia messages memory full
- Write and send a multimedia message
- E-Mail messages
- Writing and sending an e-mail with the SMS Method
- Write down the e-mail server number
- Setup an e-mail profile
- Write and send e-mail
- 1 At the start screen, press Menu, then select Messages, Text messages and Create e-mail.
- 2 Enter the e-mail address, or press Find to retrieve an e-mail address from Contacts, and press OK.
- 3 Enter a subject for the e-mail and press OK.
- 4 Compose your e-mail using the keypad and press Options.
- 5 Select Send e-mail.
- 6 Enter the e-mail server number (obtained from your service provider).
- 7 Press OK.
- Reply to a message or e-mail
- Reading the message later:
- Writing and sending an e-mail with the JavaTM Method
- 1 Press Menu, select Messages, scroll to E-mail and press Select.
- 2 Press Select.
- 3 Press Select.
- 4 Enter the recipient’s e-mail address one of two ways:
- 5 Press Options, scroll to Save and press Select.
- 6 Enter the subject of the e-mail, if you want, and press Options, scroll to Save and press Select.
- 7 Write the e-mail message. See Write text. The number of characters you can enter appears in the top right of the display.
- 8 To stop writing and save a draft version of the e-mail, press Options, and select Save draft msg.
- 9 To send the e-mail message, press Options, select Send e-mail, and press Ok.
- 10 Select
- Other options available for an e-mail application
- Downloading e-mail messages from your e-mail account
- Replying to an e-mail message
- Writing and sending an e-mail with the SMS Method
- Inbox, Outbox, Deleted items, Sent items, Drafts, and Archive folders
- E-mail settings
- 1 Press Menu, then select Messages, E-mail, Open, and Settings.
- 2 Select Mailbox in use to view a list of mailboxes, then scroll to the one you want to edit and select it.
- 3 Select Edit active mailbox and select each of the settings one by one. Enter the required settings according to the information received from your mail service provider.
- E-mail settings
- Voice messages
- Info messages
- Message settings
- Other settings (font size)
- Service commands
- Text messages
- Call log (Menu 2)
- Contacts (Menu 3)
- View the Contacts menu
- Find a name in Contacts
- Add a contact using the Contacts menu
- Edit a name, number or text item
- Delete names and numbers
- Copy Contacts
- Add number
- Save multiple numbers and text items per name
- 1 Press or in standby mode and scroll to the name you wish to add a number or text item.
- 2 Press Details, and then press Options.
- 3 Scroll to Add number or Add detail and press Select.
- 4 Scroll to one of the following types and press Select:
- 5 Enter the number or text for the type you’ve selected and press OK.
- 6 To change the type, select Change type in the options list.
- Change the default (primary) number
- 1 At the Start screen, press or and scroll to the entry you wish to change and press Details.
- 2 Scroll to the number you wish to set as default and press Options.
- 3 Scroll to As primary number and press Select.
- Send and receive a business card
- Receive a business card
- Send a business card
- Save addresses and notes
- Save multiple numbers and text items per name
- Settings
- 1-touch dialing
- Assign a key to 1-touch dialing
- 1 At the Start screen, press Contacts, scroll to 1-touch dialing and press Select.
- 2 Scroll to any empty slot and press Assign.
- 3 Enter the number (including the area code) and press OK, or press Find to retrieve a number from your contacts list.
- 4 Press Select and view the number.
- 5 Press Select and the number is assigned to the empty slot.
- 6 Enter a name for the number and press OK.
- 7 The entry appears in the slot you’ve assigned.
- Make a call with 1-touch dialing
- Change 1-touch dialing numbers
- 1 At the Start screen, press Contacts, scroll to 1-touch dialing and press Select.
- 2 Scroll to the 1-touch dialing entry you wish to change and press Options.
- 3 Scroll to Change and press Select.
- 4 Enter the new number, or press Find to retrieve a number from your Contacts list, and press OK.
- 5 Enter a name for the entry and press OK.
- Delete 1-touch dialing numbers
- Change 1-touch dialing numbers
- Assign a key to 1-touch dialing
- Voice tags
- View Info, Service, and Own numbers
- 1 Press Contacts at the Start screen, scroll to one of the number types in the following table, and press Select.
- 2 To view details of any of the number types in the previous table, press Details when the number type appears in the display.
- Caller groups
- Caller group options
- Setup a caller group
- 1 At the Start screen, press and t0 display a list of entries in your Contacts.
- 2 Scroll to a name you’d like to add to a caller group and press Details.
- 3 Press Options, scroll to Caller groups, and press Select.
- 4 Scroll to the caller group to which you’d like to add the name and press Select. A confirmation message appears in the display.
- Profiles (Menu 4)
- Settings (Menu 5)
- Right selection key settings
- “Go to” selection key
- 1 Select Menu, Settings, and scroll to Right selection key settings.
- 2 Press Select options, scroll to each of the options you want, select Mark, and press Done. Press Yes to save changes.
- 3 Select Organize to set the order of your selected options.
- 4 Scroll to the option you want to organize and press Move.
- 5 Press Done when you have the items in the order that you want; press Yes to save changes.
- “Go to” selection key
- Time and date settings
- Call settings
- Phone settings
- Music settings
- Display settings
- Tone settings
- Security settings
- Restore factory settings
- Enhancement settings
- Right selection key settings
- Music (Menu 6)
- Music player
- Radio
- 1 To turn on the radio, press Menu, and select Music and Radio.
- 2 If you have already saved radio stations, you can scroll to the station you want to listen to, or select a radio station location 1 to 20 by pressing the corresponding number key.
- 3 When the radio is on, press Options and select Switch off to turn off the radio.
- Tune a radio station
- Use the radio
- Recorder
- Music settings
- Nokia Audio Manager
- System requirements
- Install Nokia Audio Manager
- 1 Start Windows.
- 2 Insert the CD-ROM supplied in the sales package in the CD-ROM drive of your PC.
- 3 If the CD-ROM does not launch itself automatically, open Windows Explorer and select the CD-ROM drive where you inserted the CD-ROM.
- 4 Right-click the Nokia Audio Manager icon and select Autorun.
- 5 Follow the installation instructions that appear on the display of the computer to successfully complete the installation.
- 6 Restart the computer after installation of the Nokia Audio Manager software.
- Save CD tracks with Nokia Audio Manager
- 1 On the PC, open Nokia Audio Manager.
- 2 Insert a music CD in the CD drive of your PC and click on the CD Player tab.
- 3 By default, all track information should be displayed. If not, click on the Load CD button.
- 4 To save tracks onto your hard disk, select the tracks you want and click the Save tracks button.
- 5 To transfer the saved tracks to the Music Studio, click the + Add button, select the required tracks, and click Open.
- 6 Transfer the tracks to the Music Studio: In the Music Studio, click the Add button and browse for the saved music tracks. Select the required track(s), right-click on the selection and select Open from the shortcut menu.
- Transfer music files to your phone
- 1 Save the tracks and playlists in the Music Studio of the Nokia Audio Manager.
- 2 Check that the PC and phone are connected with the supplied DKU-2 cable.
- 3 On the PC, open Nokia Audio Manager.
- 4 Click on the icon in the mobile device area of the Music Studio.
- 5 Highlight the tracks or playlists that you want to transfer to your phone by clicking on them.
- 6 Click Transfer to device.
- Disconnect the USB cable properly
- Music file size and track length
- Other features
- Transfer music files using Windows Explorer
- MP3 files
- 1 Connect your PC and your phone with the supplied DKU-2 USB cable.
- 2 Open Windows Explorer. Your phone will appear as a local drive (named by Nokia 3300), and with a drive letter assigned to it.
- 3 Click on the folders to display a window that shows the contents of the folder on the phone memory card.
- 4 Open a second instance of Windows Explorer and display the contents of the folder on your PC where you have MP3 files stored.
- 5 Select the MP3 files on your PC that you wish to transfer to the phone.
- 6 Drag and drop the files from the second window into the first window and place in the music folder.
- 7 Disconnect the USB cable by double-clicking the green arrow on the taskbar at the bottom of your PC screen.
- 8 Click on USB Device in the Hardware devices window.
- 9 Highlight USB device and click OK.
- 10 Click OK.
- ACC files
- 1 Connect the ADE-2 recording cable to your phone and to the external music device, such as a CD-Player.
- 2 Select the track from the CD player that you want to record.
- 3 Begin playing the selected track and select Yes on your phone display to start recording.
- 4 Press Stop when the song ends on the CD player.
- 5 Select Save.
- 6 Enter the Track name: and press OK.
- 7 Enter the Artist: name and press OK.
- 8 Select Options to Play, Delete, or Rename.
- 9 To record another song from the CD player, select Back twice to return to the Record option. Repeat steps 3-8.
- Record from a radio
- 1 Connect the ADE-2 recording cable to the headphone connector on the radio and to your phone.
- 2 Begin playing the selected track and select Yes on your phone display to start recording.
- 3 Press Stop when the song ends.
- 4 Select Save.
- 5 Enter the Track name: and press OK.
- 6 Enter the Artist: name and press OK.
- 7 Select Options to Play, Delete, or Rename.
- 8 To name the recording go to Menu and scroll to Music and select. Select Recorder, then Recording list.
- 9 Select Options, then scroll to and select Rename.
- 10 Enter the name and artist and press OK.
- Record from the FM radio in your phone
- 1 Go to Menu and scroll to and select Music.
- 2 Scroll to Recorder, and select Record.
- 3 Press Stop to end the recording.
- 4 Select Save, then enter the Track name: and press OK.
- 5 Enter the Artist: name and press OK.
- 6 Select Options to Play, Delete, or Rename.
- 7 If you want to rename a recording, select Options, then scroll to and select Rename.
- 8 In the New name: window, press Clear until the window is empty.
- 9 Enter the name and artist and press OK.
- MP3 files
- Games (Menu 7)
- Applications (Menu 8)
- Launching an application
- 1 Press Menu, and select Applications and Select application.
- 2 Scroll to an application or an application set (name depends on the application).
- 3 Press Options and select Open.
- 4 To launch a single application, scroll to the desired application and press Options and select Open.
- 5 Press the selection key or to show the options list.
- 6 Select one of the options or press Back to continue with the application.
- Other options available for an application or application set
- Download an application
- Memory status for applications
- Launching an application
- Organizer (Menu 9)
- Alarm clock
- Calendar
- To-do list
- Synchronization
- Synchronizing from your phone
- 1 Press Menu, then select Extras, Synchronization, and Settings, and select the connection settings you need for synchronization.
- 2 Mark the data to be synchronized.
- 3 Press Menu, and select Connectivity, Synchronization and Synchronize.
- Save synchronization settings received as text message
- Key in synchronization settings manually
- Synchronizing from your phone
- Gallery (Menu 10)
- 1 Press Menu and select Gallery. The list of options is shown.
- 2 Select View folders to open the list of folders.
- 3 Select the desired folder and the list of files in the folder is shown. Graphics and Tones are the original folders in the phone.
- 4 Scroll to the desired file. Press Options and the following options are available:
- Extras (Menu 11)
- Calculator
- 1 Press Menu, and select Extras and Calculator.
- 2 When ’0’ is displayed on the screen, key in the first number in the calculation.
- 3 Press Options and select Add, Subtract, Multiply, Divide, Square, Square root or Change sign.
- 4 Key in the second number.
- 5 For a total, press Options and select Equals. Repeat steps 3 to 5 as many times as is necessary.
- 6 To start a new calculation, first press and hold Clear.
- Making a currency conversion
- 1 Press Menu, and select Extras and Calculator.
- 2 To save the exchange rate, press Options and select Exchange rate. Select either of the displayed options. Key in the exchange rate and press OK. The exchange rate remains in the memory until you replace it with another one.
- 3 To make the currency conversion, key in the amount to be converted, press Options and select Foreign units in home units or Home units in foreign units.
- Voice recorder
- Record a memo
- Record a phone conversation
- 1 Place the call.
- 2 While in the call, press Options.
- 3 Scroll to Record, then press Select.
- 4 When you are finished, press Stop.
- 5 Recording saved appears on the screen, and the conversation is automatically saved under the name “Recording.” You can edit the name later.
- Audio cues
- Listen to or edit a memo
- Set an alarm
- Notes about voice memos
- Voice commands
- Add a voice command to a menu function
- 1 Press Menu and select Extras and Voice commands.
- 2 Select one of the options, then select Add command. The screen displays Press Start, then speak after the tone. This is followed by a screen that says Please speak now.
- 3 Speak clearly and add a command such as “Call my voice mailbox”.
- 4 If you speak too quietly, too long, or too short, a screen displays a message and asks if you want to try again. Press OK and Start again.
- 5 The symbol is displayed when a voice command is saved to one of the options.
- Use the voice commands
- Play, change or delete a voice command
- Add a voice command to a menu function
- Countdown timer
- Stopwatch
- Memory card
- Backup/Restore
- Calculator
- Services (Menu 12)
- Notes on mobile internet access
- Technology background
- The wireless service provider’s role
- Set up for browsing
- 1 Press Menu and select Services, Settings and Connection settings.
- 2 Select Active service settings.
- 3 Scroll to the set that you would like to activate and press Activate.
- 4 Select Edit active service settings.
- Settings when GSM data is the selected data bearer
- Settings when GPRS is the selected data bearer
- Sign on to the mobile internet
- Use browser options
- Navigate the mobile internet
- General guidelines for using the phone keys
- Examples of mobile internet sites
- 1 Header line: shows the current mobile internet site.
- 2 Active link: appears as a highlighted word.
- 3 Inactive link: appears as an underlined word.
- 4 Selection list: Brackets [ ] appear when you have the option to enter information.
- 5 Options: Press Options to go to the site menu and/or browser page.
- 6 Back: Press Back to return to the previous page.
- 7 Data entry field: Brackets [ ] that enclose dots indicate when you need to enter information. In this example, you can enter your zip code to receive the local weather forecast.
- Use bookmarks
- Set a bookmark while browsing
- 1 Press Menu, then select Services and Bookmarks. After a brief pause, a list of bookmarks (if any) appear in the display.
- 2 Press Options, scroll to New bookmark (if necessary), and press Select.
- 3 Enter an address for the bookmark and press OK.
- 4 Enter a title for the bookmark and press OK. A message appears in the display confirming your bookmark is saved.
- Disconnect from the mobile internet
- Set a bookmark while browsing
- Security issues
- Clear the cache
- About authority certificates
- Notes on mobile internet access
- SIM services (Menu 13)
- Instant Messaging (Menu 14)
- Log into service
- To log in for the first time, perform the following steps:
- 1 Press Menu and scroll to IM, Menu 14. Press Select and Opening application appears.
- 2 From the IM menu, scroll to Active network and select the network to which you want to connect.
- 3 From the IM menu, scroll to Login and press Select. The User ID: screen appears.
- 4 Enter your user name, press Options, then select OK.
- 5 Enter your password, press Options, then select OK.
- 6 Press Yes to allow web access.
- To log in for the first time, perform the following steps:
- Set your availability
- Instant messages
- Write and send instant messages
- 1 From the IM menu, scroll to My contacts and press Select.
- 2 Press Options; then scroll to Write message and press Select.
- 3 Enter the user name of the person to whom you want to send an instant message.
- 4 Press Options, and select OK.
- 5 Press Options, select Write message and enter a message.
- 6 Press Options, then select Send.
- Receive and reply to instant messages
- Chat sessions
- Contacts
- Private groups
- Create private chat group
- Add members to private group chat
- 1 From the group’s Conversation view, press Options.
- 2 Scroll to Group members and press Select.
- 3 Press Send invitation.
- 4 Scroll to the contact you want to invite to the group chat and press Select
- 5 Enter the invitation text, press Options, then press Send.
- 6 To add other members to the group, repeat steps 3-5.
- Remove private group members
- Save a private group
- Invitations to group chat
- Write and send instant messages
- Instant messaging settings
- Set up screen name
- 1 From the IM menu, scroll to Settings and press Select.
- 2 Enter your screen name, press Options, then select OK.
- Set up automatic login
- Set up contacts order
- Set up presence status and authorization
- 1 From the IM menu, scroll to Settings and press Select.
- 2 Scroll to Availability, press Select, then select Updates.
- 3 Scroll to On, then press Select.
- 1 From the IM menu, scroll to Settings and press Select.
- 2 Scroll to Availability, press Select, then select Authorization.
- 3 Select either My contacts or All, then press Select.
- Set up screen name
- Log off service
- Log into service
- Battery statements
- Charging and Discharging
- Use proper care and maintenance
- Understand important safety information
- Emergency calls
- 1 If the phone is not on, switch it on. Check for adequate signal strength.
- 2 Remove the DKU-2 data cable, if it is connected.
- 3 Press key as many times as needed (for example, to exit a call, to exit a menu, etc.) to clear the display and ready the phone for calls.
- 4 Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.
- 5 Press the key.
- Certification information (SAR)
- Use enhancements safely
- Frequently asked questions
- Glossary
- Technical information
- Troubleshooting
- 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty.
- 2 The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is not assignable or transferable to any subsequent purchaser/end-user.
- 3 The limited warranty extends only to Consumers who purchase the Product in the United States of America.
- 4 During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any defective parts, or any parts that will not properly operate for their intended use with new or refurbished replacement items if such repair or r...
- 5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.
- 6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.
- 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:
- a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteratio...
- b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, thef...
- c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.
- d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
- e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product.
- 8 Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:
- a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.
- b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to: Nokia Inc., Attn: Repair Department 795 West Nasa Blvd.
- c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installatio...
- d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.
- e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair th...
- f) If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the ...
- 9 You (the Consumer) understand that the product may consist of refurbished equipment that contains used components, some of which have been reprocessed. The used components comply with Product performance and reliability specifications.
- 10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE...
- 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damage...
- 12 Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider...
- 13 This is the entire warranty between Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained here...
- 14 This limited warranty allocates the risk of failure of the Product between the Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price.
- 15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product.
- 16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Service 7725 Woodland Center Blvd., Ste. 150 Tampa, FL 33614 Telephone: 1-888-NOKIA-2U (1-888-665-4228) Facsimile: (813) 287-6612 TTY/TDD Users Only: ...
- 17 The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.
- Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones.
- Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones.
180
Copyright
© 2003 Nokia. All rights reserved.
5 Press Options, select Write message and enter a message.
6 Press Options, then select Send.
Receive and reply to instant messages
When you receive an instant message, a screen appears, showing that you
have a new instant message with the name of the sender.
1 Press Open, then press Options.
2 Select Write message, and enter a message.
3 Press Options, then select Send.
Chat sessions
If you want to chat with a person, you must first add that person to the
contact list. See Add a new contact to contact list for instructions.
Chat session from the contact list view
1 From the IM menu, scroll to My contacts and press Select.
2 Scroll to the contact with whom you want to chat.
3 Press Options and select Chat.
4 Press Options, select Write message, and enter a message.
5 Select Send.
The conversation view appears with the contact’s name inside the input
window.
6 After your contact replies, repeat steps 4-5 to continue your chat session.