User manual

[ 44 ]
Store the feature codes
Before you can use the Send own caller ID when calling feature, you must store the feature
codes for activating this feature. Once the code is stored in your phone, it is sent automatically
to the network when you select this option from your phone’s menu.
1 Press Menu 4-6-5 (Settings > Network services > Network feature setting). The Feature
code field appears after a few seconds.
2 Enter the feature code your service provider gave you (example *67 for activating Send
own caller ID when calling), then press OK.
3 Select No to assign the activation code.
Place a call without sending your number
1 Press Menu 4-6-4 (Settings > Network services > Send own caller ID when calling).
2 Scroll to No, then press Select.
3 Enter a phone number, then press OK. Press Search to recall a number from the phone book.
The phone automatically inserts the feature code into the dialing string and dials the phone
number. The person you’re calling cannot see your phone number on their caller ID.
• USE AUTOMATIC REDIAL
At times you may not be able to place a call (for example: due to the high volume of traffic on
the wireless network). When the wireless network is busy or unavailable, select Automatic
redial to retry the call.
1 Press Menu 4-1-2 (Settings > Call settings > Automatic redial).
2 Scroll to On and press Select.
If the system is busy, your phone makes three additional call attempts. If you want to stop the
automatic redial process before the last attempt, press the end key.
Important: This feature does not automatically retry a number.
• CALLING CARD
If you wish to use a calling card for long distance calls, you must first save your calling card
information into your phone. Your phone is equipped to handle up to four calling cards.
Saving calling card information
1 Press Menu 4-1-6 (Settings > Call settings > Calling card).
2 Enter your security code, then press OK.
3 Scroll to one of the four memory locations, then press Options.
4 Scroll to Edit, then press OK.
5 Select Dialing sequence. Scroll to one of the following sequence types, then press Select.