User manual

33
Standard method
1
Dial the feature code followed by the number you want
to call.
2
Press
Call
.
Example: If the feature code to hide your number is *67 and
the number you want to dial is [phone], dial
*672145551234
, then press
Call
.
Menu method
You can save the feature code given by your service provider
so that
Send own number
appears in your phone’s menu,
and then use
Menu
4 4 7 to use this feature. See ‘Network
feature setting’ on page 27.
This feature must be activated before each call.
Yes
displays your number to the person you are calling.
No
prevents your number from being shown to the person
you are calling.
Calling card calls
Before you can make a call using a calling card, you have to
enter your calling card information into the phone. See
‘Calling card set-up’ on page 18.
To make a call using a calling card:
1
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make
a calling card call. See your calling card for instructions.
2
Press and hold
Call
for a few seconds until your phone
displays
Card call
.
3
Your phone displays
Wait for tone, then press OK
.
Wait for the tone, then press
OK
.
4
Your phone displays
Wait for tone, press OK again
.
Wait for the tone again, then press
OK
.