OWNER’S MANUAL
Keys Power key Press and hold to turn your phone on or off. Clear key Clears characters from the screen. Press and hold to return to the start screen. Navi™ key Its current function is displayed above it. Use to access the menu, make calls, etc. Voice mail Press and hold 1 to access voice mail (see p. 27).. Fixed-length antenna See p. 29. Do not attempt to extend or remove! Menu Scroll keys Press to scroll through menus and phone book. They also adjust speaker volume while in a call.
Indicators and Icons Line 1 is selected for outgoing calls (see page 39). Line 2 is selected for outgoing calls (see page 39). You have an active call. You have one or more new voice messages. You have one or more new text messages. (If blinking, text message memory is full.) Keyguard is on. Your phone will not accept any keypresses. To turn it off, press Unlock, then The alarm clock is set. . The Silent quick alert setting is selected, or you have set the ringing option to Silent.
Contents 1. For your safety 1 FCC/Industry Canada Notice . . . . . . . . . . . . . . . . 2 Using this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Preparing the phone for use 3 Inserting the SIM card . . . . . . . . . . . . . . . . . . . . . 3 Attaching the battery . . . . . . . . . . . . . . . . . . . . . 4 Removing the battery . . . . . . . . . . . . . . . . . . . . . 5 Battery charging . . . . . . . . . . . . . . . . . . . . . . . . . 5 Important battery information . . . . . . . . .
. Basic functions 24 Turning the phone on or off . . . . . . . . . . . . . . .24 About the antenna. . . . . . . . . . . . . . . . . . . . . . .24 Checking signal strength. . . . . . . . . . . . . . . . . .24 Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Adjusting earpiece volume . . . . . . . . . . . . . . . .25 Ending a call. . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Last number redial . . . . . . . . . . . . . . . . . . . . . . .26 Saving a name and number . . . . .
Exchanging names and numbers . . . . . . . . . . .40 Scrolling view . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Checking available memory . . . . . . . . . . . . . . . 41 Service numbers . . . . . . . . . . . . . . . . . . . . . . . . .41 9. Call log 42 Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Received calls . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Clearing call lists . . . . .
14. Security features 64 Access codes overview. . . . . . . . . . . . . . . . . . . .64 PIN code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 PIN2 code. . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Security code . . . . . . . . . . . . . . . . . . . . . . . . . .66 PUK and PUK2 codes . . . . . . . . . . . . . . . . . . . . .66 SIM card security . . . . . . . . . . . . . . . . . . . . . . . .66 Phone security . . . . . . . . . . . . . . . . . . . . . . . . . .67 Fixed dialing . .
1. For your safety Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal. Road Safety Comes First Don’t use a hand-held phone while driving; park the vehicle first. Switch Off In Hospitals Follow any regulations or rules. Switch phone off near medical equipment. Switch Off On Aircraft Wireless phones can cause interference. Using them on aircraft is illegal. Switch Off When Refueling Don’t use phone at a refueling point.
FCC/Industry Canada Notice Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
2. Preparing the phone for use Before you can use your new phone, you need to: 1 Insert a miniature SIM card (available from your service provider). 2 Attach and charge the battery. If you purchased an optional analog module, you should attach it to the phone. Note: The analog module is a separate accessory that may be purchased from your service provider. It allows you to make and receive calls in analog networks. See ‘Optional analog module’ on page 70.
4 Close the holder. 5 Slide the SIM card holder toward the bottom of the phone until it locks into place. 6 Attach the battery. Attaching the battery To attach the battery, place it on the back of the phone as shown and slide it toward the top of the phone until it clicks into place. Attaching the battery when using optional analog module 1 Place the analog module on the back of the phone. 2 Slide the module toward the top of the phone until it clicks into place.
Removing the battery Note: Switch off the phone before removing the battery! 1 Press and hold the button at the top of the battery. 2 Slide the battery toward the bottom of the phone. 3 Lift the battery off the phone. Battery charging Your phone is powered by a rechargeable NiMH or Li-Ion battery. Note that a new NiMH battery’s full performance is achieved only after two or three complete charge and discharge cycles.
When is charging complete? When the charge indicators stop scrolling, your phone is considered fully charged. However, a slight increase in charge may occur if you leave your phone connected to the charger. When is a good time to charge? You can charge anytime, but remember that when your phone displays Battery low, you only have a couple of minutes of talk time left. Can I make calls while charging? Yes, but your battery may not charge during a call. Charging should resume once you end the call.
• Never use any charger or battery which is damaged or worn out. • Do not short circuit the battery. Accidental short circuiting can occur when a metallic object (coin, clip, or pen) causes direct connection of the + and - terminals of the battery (metal strips on the back of the battery), for example when you carry a spare battery in your pocket or purse. Short circuiting the terminals may damage the battery or the connecting object.
3. About the phone, keys and menu Power key The power key has several functions: • To turn the phone on or off, press and hold it down. • When the phone is not attached to a headset or handsfree car kit, you can press to select a quick alert setting (see page 21). • To turn the lights on when Keyguard is on, press . Nokia Navi™ key Your phone’s Navi™ key appears below the display. Its current function is indicated by the word that appears above it (for example, Menu).
Lights To turn your phone’s lights on for 15 seconds: • if Keyguard is off, press any key • if Keyguard is on, briefly press the key Start screen The start screen appears when you first turn on your phone. Menu appears above the Navi™ key so you can access your phone’s menu. Your phone must be at the start screen in order to use many of its features. To get to the start screen, press and hold for a second. Menu Your phone’s menu allows you to easily access the many powerful features in your phone.
Phone menu shortcuts When you select a menu item, numbers appear on the display above the scroll bar. If you become familiar with these numbers, you can use them as shortcuts for accessing different features. For example, to access the Security settings menu, you can simply press Menu 4 2. Note: (1) Menu items in your phone vary depending on the network, SIM card, and accessories used.
64 Dice 65 Rotation 4 Settings 41 Call settings 411 412 413 414 415 416 Automatic redial Call waiting Send own number Line in use Calling card Automatic answer 7 Calculator 8 Clock 81 Alarm clock 82 Clock settings 821 Display/Hide clock 822 Adjust time 823 Time format 42 Security settings 421 422 423 424 425 SIM card security Phone security Module security Fixed dialing Access codes 9 Tones 91 Ringing options 43 Phone settings 431 432 433 434 435 436 Language List of own numbers Touch tone length We
Entering letters and numbers Cursor The cursor is a blinking vertical line that appears on the screen when you are entering text or numbers. Characters you enter appear to the right of the cursor. Pressing the key deletes the character to the left of the cursor. Use the scroll keys to move the cursor to the right or left. ABC mode When your phone is ready for you to enter text, such as a name or message, it switches to ABC mode. The ABC icon shows that it is in ABC mode.
Changing letter case Press the key to switch between upper- and lowercase letters. The ABC icon switches to abc to indicate that you are using lower case. Entering numbers To enter numbers while in ABC mode, you can: • press and hold the corresponding key until the number appears, or • switch between ABC mode and number mode by pressing and holding the key. Special characters in names and messages In ABC mode you can press the key to view the special characters below.
Special characters in phone numbers You can use special characters to dial or save international phone numbers as well as phone numbers of automated services such as bank account information. When entering numbers, press the key repeatedly to use these characters. Character Use * This character is used to send command strings to the network. Contact your service provider for details. + This character is a prefix used for dialing international numbers.
To lock the keys Press Menu . To unlock the keys Press Unlock . Notes about Keyguard • When Keyguard is on, calls may be possible to the emergency number programmed into your phone (e.g. 911 or other official emergency number). However, one-key emergency dialing (‘the 9 key’) does not operate. • Keyguard is automatically turned off when the phone is connected to a car kit.
4. Settings This section describes some phone settings that you probably won’t change very often, and others that allow you to customize your phone to suit your preferences. You can set them now or skip to ‘Basic functions’ on page 24 to get started using your phone. Automatic redial Use Menu 4 1 1 to turn this feature on or off. When automatic redial is on, your phone will redial the number you’re trying to call up to 10 times. To stop the call attempts, press Quit or .
to choose 5 At Dialing sequence, press Select. Press the dialing sequence your card uses, then press Select.
Choosing a calling card to use Use Menu 4 1 5 to select a calling card to use. You will be required to enter your security code. Making calling card calls See ‘Calling card calls’ on page 34. Clock Your phone has an internal clock that can be displayed on the start screen. The clock must be set for call times to be recorded (see ‘Call log’ on page 42). Selecting time format Use Menu 8 2 3 to set the clock’s format to 24-hour or am/pm. Setting the clock Use Menu 8 2 2 to enter the current time.
Lights If you’re using your phone with a car kit, use Menu 4 3 8 to set your phone’s lights to On (lights stay on) or Automatic (after 15 seconds, lights turn off until the next key is pressed, phone rings, etc.). For information about turning your phone’s lights on at any time, see page 9. Send own number Use Menu 4 1 3 to access this network service, which allows you to display your phone number to the person you are calling.
Tones Use Menu 9 to change the six sound settings in your phone: ringing option, ringing tone, ringing volume, message alert tone, keypad tones, and warning tones. The quick alert settings feature (see page 21) allows you to quickly select a fixed combination of these settings to suit your current environment, whether you are at a soccer game or in a library. Ringing option Use Menu 9 1 to tell your phone how to notify you that you have a call.
Ringing volume Use Menu 9 3 to control the volume of your phone’s ringing and of message alert tones. Message alert tone Use Menu 9 4 to choose the tone played when you receive a text message. Scroll to a tone to hear how it sounds. Keypad tones Use Menu 9 5 to adjust the volume of the tones your phone makes when you press its keys. Warning and game tones Use Menu 9 6 to turn your phone’s warning tones on or off.
My tones This setting uses the current settings in Menu 9, Tones. Silent All sound is turned off. The start screen. icon appears at the Discreet Your phone beeps once when you receive a call or text message. Other tones are turned off. Loud Your phone rings loudly. Other tones are loud as well. Note: Whenever you change a setting in Menu 9, Tones, the phone switches the current quick alert setting to My tones.
If you have subscribed to a second phone line (‘Choosing an outgoing line’ on page 34) and have a voice-mail subscription for both lines, you will need to save each voice mailbox number separately. Select Line 1 as outlined on page 34, then save the voice mailbox number for Line 1 using Menu 2 3. Next, select Line 2 as outlined on page 34, then save the voice mailbox number for Line 2 using Menu 2 3. For more information on voice mail, see ‘Voice messages’ on page 47.
5. Basic functions Turning the phone on or off Press and hold the key for one second. Note: If the phone asks for a PIN code, see ‘PIN code’ on page 65. If the phone asks for a security code, see ‘Security code’ on page 66. WARNING! Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger. About the antenna Your Nokia phone has a fixed-length antenna. Do not attempt to extend or remove it.
Get a strong signal When you are at the start screen (see page 9) or in a call, the strength of the radio signal is indicated by the signal indicators on the left side of your phone’s display. These indicators scroll as the signal strength increases and decreases. To improve your phone’s reception, try moving your phone slightly. If you’re inside a building, move toward a window. Making a call 1 Enter the area code and phone number. (Menu changes to Call.
Ending a call Press End. (To clear any characters that remain on the screen, press and hold .) Last number redial The last eight numbers you dialed are stored in the dialed calls list. Use this list to re-dial a number you have called recently. 1 From the start screen, press calls list. to access the dialed 2 Scroll to the number you want. 3 Press Call. Saving a name and number See ‘Saving names and numbers’ on page 38. Finding a name and number 1 Press to access your phone book.
Caller ID Caller ID is a network service that displays the phone number of the person calling you, if it is available. Check with your service provider for details. If the caller can be identified, the phone displays the caller's phone number and calling. If the number matches a name saved in your phone book, the name is displayed instead. However, if the last seven digits of the phone number match more than one name in the phone book, only the phone number is displayed.
6. Emergency calls 1 If the phone is not on, switch it on. Some networks may require that a valid SIM card is properly inserted in the phone. key for several seconds to 2 Press and hold the ready the phone for calls. If any characters remain on the screen, press and hold again. 3 Key in the emergency number for your present location (e.g. 911 or other official emergency number). Emergency numbers vary by location. 4 Press Call.
Emergency key 9 When this feature is on, the phone attempts to make an emergency call when you: • press and hold the 9 key, or • press 9, then press Call. This feature is set to Off in new phones and will not work until you turn it on. Use Menu 4 3 7 to turn this feature on or off. Note: When Keyguard is active, the only way to make an emergency call is to dial the emergency number, then press Call. IMPORTANT! Official emergency numbers (for example, 911) vary by location.
7. Advanced functions In-call menu When you are in a single call, the Navi™ key function is End. However, your phone has an in-call menu that allows you to perform several functions while in a call. To access the incall menu, press to change the Navi™ key function to Options, then press Options. Note: If you have an active call and an incoming or held call, pressing isn’t necessary; Options appears automatically.
Muting the microphone To mute your phone’s microphone during a call, choose Mute from the in-call menu. To unmute the microphone, choose End mute. The difference between mute and call hold is that mute allows you to continue to hear the other person. Making/receiving multiple calls Making a new outgoing call Select New call from the in-call menu, enter or find the phone number you want, then press Call. The first call is automatically put on hold.
Ending the active call only Select Drop call from the in-call menu. The held call becomes active. Ending both calls Select End all calls from the in-call menu. Call forwarding Use Menu 5 to access the call forwarding network service, which lets you forward your incoming calls to another phone number. Check with your service provider for details. For information about types of call forwarding that are not available in your phone’s menu, see ‘Appendix A’ on page 74.
Forward when not able to take calls forwards calls only when your line is busy, your phone is turned off, there is no answer, or your phone is not in service. There is no Status option for this type of call forwarding. Cancelling call forwarding To cancel each type of call forwarding individually, use the Cancel option. To cancel all call forwarding, press Menu 5 6.
Making calls using one-touch dialing Press and hold a key (2 through 8) for a few seconds to call the number assigned to it. Your phone finds the phone number, displays it briefly, then dials it. Choosing an outgoing line Some networks offer a service that allows you to have more than one phone line—for example, one for work-related calls and one for personal calls.
2 Press and hold Call for a few seconds until your phone displays Card call. 3 Your phone displays Wait for tone, then press OK. Wait for the tone, then press OK. 4 Your phone displays Wait for tone, press OK again. Wait for the tone again, then press OK. List of own numbers If your SIM card supports this feature, you can use Menu 4 3 2 to view the phone number(s) of your SIM card. Use the scroll keys to view the numbers if there is more than one.
Saving touch tone strings Touch tone strings can be used for sending and receiving information with your phone. Save touch tone strings the same way you save phone numbers (see page 26). For example, you can save your office voice mailbox number along with your password for easy access to your messages. See ‘Special characters in phone numbers’ on page 14. Sending touch tone strings 1 During a call, press , then press Options. 2 Scroll to Touch tones, then press OK.
Receiving a fax or data call When you receive a fax call, Fax call flashes on your phone’s display. When you are already in a call, a waiting fax call is indicated by F . When you receive a data call, Data call flashes on your phone’s display. When you are already in a call, a waiting data call is indicated by D . You can answer fax and data calls using the connected terminal or the phone’s keypad.
8. Phone book Your phone allows you to save phone numbers and associated names so they are right at your fingertips for easy dialing. Note that the maximum number of phone book entries and the maximum length of saved names and numbers depend on SIM card capacity. Please check with your SIM card provider or carrier. Saving names and numbers Saving a name and number is easy! Just enter the phone number, press or , then press Save. Enter a name if you wish, then press OK.
• A name may appear only once in memory. If you try to save a name that already exists in memory, the phone asks if you want to replace the currently saved name. • If you try to save a phone number and your phone book is full, you are given the option to replace an existing entry. Scroll to the entry you want to replace and press to cancel. OK, or press Finding names and numbers There are several ways to find names and numbers in your phone book.
Editing names and numbers To edit phone book entries, press Menu 1 3, scroll to the entry you want to edit, then press Edit. Edit the name and number as needed. Erasing names and numbers Use Menu 1 4 to erase entries from your phone book. One by one lets you select one entry at a time to be erased. Erase all erases your entire phone book. (You will be required to enter your security code first.
Checking available memory Use Menu 1 6 2 to see how many memory locations are free and how many are being used. (Each memory location holds one number and associated name.) Service numbers If your wireless service provider supports this feature, you can use Menu 1 8 to access a list of customer service phone numbers. Select a number, then press Call.
9. Call log For your convenience, the call log (Menu 3) records the phone numbers of missed, received, and dialed calls as well as the amount of time spent in calls. Note: Missed, received, and dialed calls lists are automatically erased when you use a SIM card that is not one of the 5 most previous cards used with the phone, or you change the phone security setting. See ‘Phone security’ on page 67.
Viewing the missed calls list at any time Use Menu 3 1 to view the missed calls list at any time. To dial a number, press Options, then choose Call. Received calls Your phone automatically stores the phone numbers of the 5 most recent calls you’ve answered. Use Menu 3 2 to view the received calls list. To dial a number, press Options, then choose Call. Dialed calls Your phone automatically stores the last 8 numbers you’ve dialed. From the start screen, press to access the dialed calls list.
Viewing call timers Use Menu 3 5 to view the various call timers. Setting timers back to 0 Use Menu 3 5 4 to clear digital call timers. You will be required to enter your security code. Displaying the current call timer during calls 1 Press Menu 3 5 1. 2 Press Details. 3 Press Select. 4 Scroll to On, then press OK. During a call, the amount of time spent in that call will be displayed.
10. Controlling call costs Your phone has features that help you control the amount of money you spend on calls. Note: The actual invoice for calls and services from your service provider may vary, depending upon network features, rounding-off for billing, taxes and so forth. Viewing call costs This network service allows you to check the cost of the last or current call, or the total cost of all calls that you have made or received since the counters were last reset.
Limiting call costs This feature allows you to set a call cost limit for your phone. When the limit you set is reached, no calls can be made except for emergency calls. Setting a call cost limit Use Menu 3 7 1 to set a call cost limit. You will be required to enter your PIN2 code. At the Number of units: prompt, enter a whole number of either charging units or dollars (see ‘Show costs in’ on page 45). The number of remaining units or dollars is shown when the display is clear.
11. Voice messages Voice mail is a network service that allows callers to record a message when you cannot be reached. Saving your voice mailbox number See ‘Voice mailbox number’ on page 22. Listening to voice messages When you receive a voice message, your phone may notify you by beeping, displaying the voice message indicator , and displaying New voice message. The phone may display the number of messages if there is more than one.
12. Text messages The text message network service allows you to exchange short text messages with other phones that have text message capability. You may also convert the message to other formats such as e-mail and fax. The messages are first sent to your Message Center and then delivered to the recipient. Contact your service provider for details. Before you can send and receive text messages, you must enter certain information into your phone. See ‘Message settings’ on page 55.
Using predictive text input Predictive text input allows you to write messages much faster than the ABC mode. With predictive text input, you only need to press each number key once for each letter.
• If the displayed word is correct, press O to accept the word and add a space. • If the displayed word is not correct, press other possible matches. to see • If the word you are trying to write is not in the dictionary, a question mark will appear. Adding a new word to the dictionary If the word you are trying to enter does not show up as a possible match, you can add the word to the dictionary.
• Press Options, scroll to Insert number, then press OK. Tip: You can also press and hold any key to enter a number. Predictive text shortcuts Press Menu 2 1 3 to write messages using the following shortcuts. Keys 2-9 Use for word entry. Press each key only once for each letter. Press to view the next matching word if the underlined word is not the one you intended. 0 Press to accept a word and add a space. Press and hold to enter a number. indicates that you can enter numbers in your message.
Sending a message After writing a message, press Options, scroll to Send, then press OK. Enter the recipient’s phone number or find it in the phone book, or enter an e-mail address, then press OK. The message is sent using the currently selected message setting (see ‘Message settings’ on page 55). Sending using alternate message setting Send special allows you to send a message using an alternate message setting (see ‘Message settings’ on page 55).
About the Inbox Incoming text messages are stored in the Inbox. Use Menu 2 1 1 to access the Inbox. You will see a list of message headers. The icon in front of the header indicates that a message has been read. The icon indicates that a message has not been read. Scroll to the message you want to read, then press Read. Working with messages in the Inbox Several options are available while you’re reading a message. Just press Options, scroll to the one you want, then press OK. Erase deletes the message.
To read a delivery report, press Read. Use the scroll keys to view different details about the message that you have attempted to send. To erase a delivery report, press Read, then press Options. Choose Erase to erase the report you are reading, or choose Erase reports to erase all of the delivery reports that are in your Inbox. About the Outbox Use Menu 2 1 2 to access the Outbox, where text messages that you have written and saved are stored.
No space: message waiting. You should delete one or more old messages to make room for the new message. The network will re-send the message at a later time. Note: Depending on your SIM card, the Inbox and Outbox can contain a total of up to 50 messages. Message settings You can specify the way your phone sends text messages. Depending on your SIM card, you can have up to five “sets” of settings—for example, one for e-mail messages, one for pages, one for faxes, etc.
Note: The menu shortcut for this feature may differ depending on the number of sets of message settings supported by your SIM card. Reply via same center Reply via same center is a network service that attempts to route the reply to a text message via your own message center. Use Menu 2 2 6 2 (Messages > Message settings > Common > Reply via same center) to turn this feature on or off.
Working with topics Use Menu 2 4 4 1 to add a topic to your topic list. Enter a topic number and give it a name (for example, Weather). When you have at least one topic in your topic list, you have the following choices. Select allows you to Mark (select) or Unmark (deselect) topics in your topic list for message delivery. You will receive messages about marked topics only. When you’re done, press , then press Yes to save your changes or to cancel. Edit allows you to edit an existing topic name and number.
13. Other features Games Use Menu 6 to challenge yourself or a friend to the five fun games in your phone. To pause a game, press . To resume, choose Continue. For information about turning game sounds on or off, see ‘Warning and game tones’ on page 21. REMEMBER! Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger. Memory Reveal pictures to find pairs in as few tries as possible.
mark; a correct figure in the wrong place gets a half mark. The game ends when the correct figures are in the right place. Tip: To copy a figure from the previous column, move the cursor over it using the 2, 4, or 8 key, then press the 5 key. Dice You can use your phone to play games requiring a set of dice. Use the Level option to set the number of dice, from one to six. You can roll, lock and unlock each die as many times as you wish. When you start a new game, the dice roll for a few seconds, then stop.
2 Enter the first number in the calculation. once ( + appears). 3 To add, press To subtract, press twice ( - appears). To multiply, press three times ( ∗ appears). To divide, press four times ( / appears). 4 Enter the second number. Repeat steps 3 and 4 as many times as needed. 5 Press Options. Equals is selected. Press OK. Note: Press the key once to enter a decimal point. Currency conversion Before you can begin converting currencies, you need to set the exchange rate.
Alarm clock The alarm clock feature is based on your phone’s internal clock and sounds an alert at a time you specify. Setting the alarm clock Use Menu 8 1 to turn the alarm clock on or off. Note that when you’re entering the alarm time, use two digits for both hours and minutes (for example, enter 1:30 as 0130). When the alarm sounds • To shut off the alarm, press any key except Snooze. • If you press Snooze, the alarm sounds again in five minutes. To turn off the alarm before then, press Stop.
External antenna jack At the back of the phone, below the antenna, there is a connector for an external antenna. The connector may be protected by a rubber cap. Remove the cap before connecting an external antenna. After removing the antenna, replace the cap. Note: (1) The external antenna jack cannot be used with the optional analog module. (2) Keep the cap out of the reach of small children. Nokia Xpress-on™ color covers Your phone’s Xpress-on™ cover is available in several fashion colors.
3 Remove the cover. 4 Remove the rubber keypad from the back of the cover. Place it into the back of the new cover. 5 Place the bottom of the cover against the bottom of the phone. Make sure all three sets of plastic tabs line up with their respective slots, as shown at left. Close the cover and snap it shut all the way around the edge of the phone.
14. Security features Access codes overview Access codes consist of the PIN code, PIN2 code, security code, and module code if using the optional analog module. Use Menu 4 2 5 to change access codes. Avoid using access codes that are similar to emergency numbers, such as 911, to prevent accidental dialing of the emergency number. Note: You can’t change the PIN code unless SIM card security (see page 66) is on.
Code Module code (used with optional analog module only) Purpose For more information If module security is on, See ‘Module the phone requests the security/module module code when the code’ on page 73. phone is turned on, the optional analog module is attached, and either (a) the module code has not been changed from the default of 12345, or (b) the module code has been changed but it is different from the security code.
Security code The security code is required by some security features, including phone security (see page 67). It comes with your phone. The default security code is 12345. Use Menu 4 2 5 3 to change it. Keep the new code secret and in a safe place, separate from the phone. When the phone requires the security code, it displays Security code: Enter the code, then press OK. If you enter an incorrect security code five times in a row, the phone will not accept the correct code for the next five minutes.
Use Menu 4 2 1 to turn SIM card security on. You will be required to enter your PIN code. Phone security When phone security is on, the phone requires the security code when you switch it on after inserting a new SIM card. Use Menu 4 2 2 to turn phone security on and off. Module security See ‘Module security/module code’ on page 73. Fixed dialing Use Menu 4 2 4 to access the fixed dialing feature.
Turning fixed dialing on or off Use Menu 4 2 4 to turn fixed dialing on or off. You will be required to enter your PIN2 code. Adding numbers to the fixed dialing list 1 Press Menu 4 2 4. 2 Scroll to Numbers, then press OK. 3 Scroll to Add, then press Select. 4 Enter your PIN2 code, then press OK. 5 Enter a name to go with the phone number (optional), then press OK. 6 Enter the phone number, then press OK.
15. SIM services Your wireless service provider may provide additional services that are available in Menu 10 of your phone. Menu 10 appears only if supported by your service provider and SIM card. The name and contents of this menu depend entirely on the services available. Any questions about service availability, rates, and instructions must be directed to the company that sold you your SIM card.
16. Optional analog module With an optional Nokia PLUS analog module and a dualmode SIM card, you can use your phone in analog networks. See your dealer for details on how to purchase this accessory and activate your subscription. Attaching the analog module First remove the battery. See ‘Removing the battery’ on page 5. 1 Place the analog module on the back of the phone. 2 Slide the module toward the top of the phone until it clicks into place. 3 Place the battery on top of the analog module.
Analog features In order for you to use the analog module, your service provider will have to add certain information to your SIM card. See your service provider for details. Once you have inserted the upgraded SIM card and attached the analog module, your phone gives you access to analog network features. Note that some features described in this manual will not be available due to the difference between digital and analog networks.
Your service provider may have programmed a list of preferred systems into your SIM card. Your phone may search for systems in this list when service is not available in your home system. The analog system selection feature allows you to request the order in which your phone looks for available systems. Choosing a system-selection method Use Menu 4 4 2 to tell your phone how to select analog systems. Note: Using Home only or Pref. system is usually the most economical choice. Pref.
Call timers for analog calls When you have the analog module attached, your phone automatically keeps track of the amount of time you’ve spent in analog calls. To see the call timer, press Menu 3 5 3. Setting timers back to 0 Use Menu 3 5 5 to set analog call timers back to zero. You will be required to enter the module code. Module security/module code If you purchased an optional analog module, you can protect it from unauthorized use by turning on module security.
Appendix A: Call forwarding The codes described in this section give you greater control over call forwarding features in GSM 1900 networks than do the menu items in your phone. For more information about call forwarding, see ‘Call forwarding’ on page 32. Enter these codes using the keypad on your phone. In place of the letter N in the codes below, substitute the number to which you want to forward calls. After entering the code, press Call. Note: These codes might not work identically in all networks.
Example: You want to forward calls to 972-555-1111 when your phone is off or there is no coverage. > Enter **62*9725551111# then press Call. You just forgot which phone number you forwarded your calls to. > Enter *#62# then press Call. You want to cancel this particular call forward. > Enter ##62# then press Call.
Forwarding status of different call types If you have used the same forwarding type for more than one type of call (for example, forward both data calls and fax calls when no answer), when you request a status you can press the scroll keys to see the forwarding status for each call type. Each type is displayed on a separate screen. Adding a timeout You can specify a timeout during which call forwarding is not active (i.e.
Appendix B: Accessories An extensive range of accessories is available for your phone. You can select the accessories that best suit your specific communication needs. For availability, see your local authorized Nokia dealer. A few practical rules for accessory operation: • Keep accessories out of small children's reach. • When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.
Batteries Several batteries are available for your phone: • • • • • BPS-1 Ultra Slim Li-Polymer 600 mAh BLS-2N Extended Li-Ion 900 mAh BMS-2S Extended NiMH 900 mAh BMS-2V Extended NiMH Vibra 900 mAh BLS-4 Ultra Extended Li-Ion 1500 mAh Charging times The table below displays approximate battery charging times. These charging times will charge your phone to about 80% of its capacity, and the battery strength indicator will stop scrolling.
Talk and standby times The table below displays approximate talk and standby times. Variations will occur depending on SIM card, network settings, and usage. Battery BPS-1 Ultra Slim Li-Polymer 600 mAh Talk Time Standby Time Digital Analog Digital Analog 2 hrs. to 3 hrs. 20 min. 1 to 2 hrs. 40 to 150 hrs. 10 to 17 hrs. 3 to 5 hrs. 1 hr. 60 to 30 min. 225 hrs. to 3 hrs. 16 to 26 hrs. 5 to 8 hrs. 2 hrs. 100 to 45 min. 375 hrs. to 5 hrs. 26 to 44 hrs.
ACP-7U Standard Travel Charger Use this durable and economical charger to charge all battery options. Plug the charger into a wall outlet and connect the connector to the bottom of your phone. Check the charging status on the phone display. Calls can be made during charging, but charging will stop for the duration of the call. Note: If the battery is completely empty, you cannot use the phone until it has enough charge to operate.
LCH-9 Rapid Cigarette Lighter Charger The multivoltage Rapid Cigarette Lighter Charger allows you to charge your phone when you travel. The small charger's functional design fits well with most car lighters and interiors. Charging times are the same as for the Rapid Travel Charger ACP-9U. Calls can be made during charging. A green light indicates that the Rapid Cigarette Lighter Charger is ready to charge. Check the charging status on the phone display.
When the phone is charging, no lights are displayed on the stand; check the charging status of the phone battery on the phone display. Note: If you have attached an optional analog module, be sure to remove it and replace the battery before placing the phone in the charging stand. Although the phone will fit in the stand with the analog module attached, charging will not take place. Charging moves to the rear slot once the front battery is 100% charged.
Appendix C: Reference information Important safety information Traffic safety Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
Hearing aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider. Other medical devices Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions.
For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Switch off your phone before boarding an aircraft.
Radio frequency (RF) signals THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Care and maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and allow you to enjoy this product for many years. When using your phone, battery, charger, OR any accessory: • Keep it and all its parts and accessories out of small children’s reach. • Keep it dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.
Appendix D: Technical information Weight: 6 oz. with BMS-2S battery Transmitting power: 1 W nominal Operating voltage: 3.6V dc 12V dc for car kit Frequency band: 1850.2 to 1909.8 MHz (TX) 1930.2 to 1989.8 MHz (RX) Number of channels: 512 to 810 Memory locations: Up to 250. Actual number is dependent on SIM card capacity. Please check with your SIM card provider or carrier. Memory capacity: Depends on SIM card. Please check with your SIM card provider or carrier.
Appendix E: Nokia One-Year Limited Warranty Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. 2.
b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by the connection to other products not recommended for interconnection by NMP.
the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned to NMP after the expiration of the limited warranty period, NMP's normal service policies shall apply and the Consumer will be responsible for all shipping charges. 9. The Product consists of newly assembled equipment that may contain used components that have been reprocessed to allow machine compliance with Product performance and reliability specifications. 10.
15. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following delivery of the Product. 16. Questions concerning this limited warranty may be directed to: Nokia Customer Care Center, USA Nokia Mobile Phones 7725 Woodland Center Boulevard, Suite #150 Tampa, FL 33614 Telephone: 1-888-NOKIA2U (1-888-665-4228) Facsimile: (813) 249-9619 TTY Users: 1-800-24NOKIA (1-800-246-6542) 17.
17.
answering with call waiting 31 dropping 30 ending 26, 30, 32 forwarding 32 hold 30 in-call menu 30 international 25 making 25 making a second 30, 31 muting 30, 31 one-touch dialing 33 redial 26 rejecting 27, 30 swapping 30 unmuting 30, 31 volume 25 care and maintenance 87 chargers 79 charging batteries 5 charging times 78 clear key 8 clock 18 alarm clock 61 displaying/hiding 18 setting 18 time format 18 contacting Nokia 92 covers, changing 62 currency conversion 60 cursor 12 moving 8 D data calls 36 delive
I Inbox 53 in-call menu 30 international calls 25 K Keyguard 14 and car kit 15 and lights 9 keypad tones 21 keys clear key 8 locking see Keyguard NaviTM key 8 power key 8 scroll keys 8 unlocking see Keyguard L language 18 last number redial 26 letters case 13 entering 12 lights 9 in car kit 19 line in use see outgoing line list of own numbers 35 locking the keys see Keyguard logic game 58 M making calls 25 memory capacity phone book 41 text messages 54 memory game 58 menu 9 help text 9 scroll bar 9 shor
phone security 67 PIN code 65 PIN2 code 65 power key 8 Predictive Text Input Adding a new word to the dictionary 50 Inserting numbers 50 Inserting symbols 50 Predictive text input 49 turning on/off 49 Predictive text shortcuts 51 PUK and PUK2 codes 66 Q quick alert settings 21 R received-calls list 43 receiving names and numbers 40 redial 26 rejecting a call 27, 30 ringing option 20 ringing tone 20 ringing tones downloading ringing tones 37 ringing volume 21 rotation game 59 S safety guidelines 1, 83 sav
T U talk and standby times 79 text messages 48 delivery reports 53 Inbox 53 memory capacity 54 message settings 55 news & info service 56 Outbox 54 reading 52 saving 51 sending 52 writing 48 tones keypad tones 21 message alert tone 21 quick alert settings 21 ringing option 20 ringing tone 20 ringing volume 21 vibrating alert 21 warning and game 21 touch tones 30, 35 TTY contact information 92 unlocking the keys see Keyguard unmuting a call 30, 31 V vibrating alert 21 voice mail see voice messages voice
Para obtener un manual del usuario en español favor de llamar o enviar un fax al teléfono 1-888-NOKIA2U (1-888-665-4228), fax 813-249-9619. For alternate formats of this owner’s manual, call our Customer Care Center at 1-888-665-4228 (Nokia2U).
