User manual

62
Security settings
This menu includes the following security features:
4-3-1
Restrict calls
-
See page 56
.
4-3-2
Access codes
-
See page 16
.
The
Access codes
submenu includes
Phone lock
(page 52)
,
Unlocked phone number
(page 70)
,
Change lock code
(page 43)
, and
Change security code
(page 62)
.
Security code
Your phone will prompt you for a security code for cer-
tain features. These features can be used only after the
correct security code has been successfully entered.
Note: When entering your security code, ***** will appear on the
display to keep others from viewing your code.
If you make a mistake entering the code, erase the last
digit entered by pressing
Clear
, or press and hold
Clear
.
Then enter the correct code or press
Back
to exit the
current feature.
If you enter an incorrect security code (
Code error
will
appear) five times in a row, your phone won’t accept
any entries for the next five minutes.
Your phone’s default security code is 12345. It’s highly
recommended that you change this code at once, write it
down, and store it in a safe place away from your phone.
Changing your security code
1. Press
Menu
4 3 2 4 (
Settings
-
Security settings
-
Access codes
-
Change security code
)
2. Enter security code and press
OK
3. Enter new security code at
Enter new security
code:
, press
OK
4. Enter new security code again at
Verify new
security code:
, press
OK
5. Phone will display
Security code changed
Note: If you have changed your security code and don’t remem-
ber the new code, contact your service provider. Once you have
changed your security code, the default setting is no longer valid.