User manual

75
Charging Times
Note: The times displayed above are approximate and will allow
your battery to obtain approximately 80% of its capacity. At this
time, the battery scroll bars on your phone’s display will stop
scrolling. If you wish to obtain 100% battery capacity, please
allow another two hours to “trickle” or “maintenance” charge.
Standby and Talk Times
Note: The times shown are approximate. Battery operation
times vary according to signal conditions, network parameters
set by the service provider, and how you use your phone.
Battery Option
ACP-7U
Charger
ACP-9U
Charger
BPS-1 Ultra Slim Li-Polymer Battery 600 mAh 2 hrs 30 min 1 hr 20 min
BLS-2N Extended Li-Ion Battery 900 mAh 4 hrs 2 hrs
BMS-2/BMS-2S Extended NiMH Battery
900 mAh
4 hrs 1 hr 30 min
BMS-2V Vibrating NiMH Battery 900 mAh 4 hrs 1 hr 30 min
BLS-4 Extended Li-Ion Battery 1500 mAh 5 hrs 3 hrs 30 min
Battery Option
Digital
Tal k Ti me
Analog
Tal k Ti me
Standby Time
BPS-1 Ultra Slim
Li-Polymer Battery
600 mAh
1 hr 20 min to
2 hrs 10 min
40 min to
1 hr 15 min
66 to 133 hrs (dig)
20 to 33 hrs (ana)
BLS-2N Extended Li-Ion
Battery 900 mAh
2 hrs to
3 hrs15 min
1 hr to
1 hr 50 min
100 to 200 hrs (dig)
30 to 50 hrs (ana)
BMS-2/BMS-2S
Extended NiMH
Battery 900 mAh
2 hrs to
3 hrs15 min
1 hr to
1 hr 50 min
100 to 200 hrs (dig)
30 to 50 hrs (ana)
BMS-2V Vibrating NiMH
Battery 900 mAh
2 hrs to
3 hrs15 min
1 hr to
1 hr 50 min
100 to 200 hrs (dig)
30 to 50 hrs (ana)
BLS-4 Extended Li-Ion
Battery 1500 mAh
3 hrs 10 min to
5 hrs 10 min
1 hr 35 min to
2 hrs 50 min
170 to 335 hrs (dig)
50 to 83 hrs (ana)