User manual

[ 122 ]
Add a voice tag for the command
1 Press Menu 11-3 (Extras > Voice commands).
2 Scroll to the phone function you wish to tag, then press Select.
3 Scroll to an option associated with that function, then press Select.
4 Press Options, then select Add command.
5 Press Start, then speak the voice tag clearly into the microphone.
Note: Do NOT press Quit unless you want to cancel the recording.
The phone replays and then saves the recorded tag. The icon appears
next to commands which have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue
a command by speaking the voice tag. There are three ways to activate a
voice command:
1 If you have the optional headset attached, press and hold the
headset button.
OR
Press and hold Contacts (or Go to).
OR
Press and hold the volume down key.
2 When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the tag, Found appears, and the phone plays
the recognized voice tag from the phone memory through the
earpiece. The function you requested is then activated.
6200.ENv1_9356027.book Page 122 Wednesday, July 7, 2004 3:40 PM