User manual

[ 90 ]
Activate/deactivate automatic redial
Occasionally, your network may experience heavy traffic, resulting in a
fast, busy signal when you dial. With automatic redial activated, your
phone redials the number up to 10 times, and notifies you once the
network becomes available.
1 At the Start screen, press Menu 4-3-3 (Settings > Call settings >
Automatic redial). After a brief pause, On and Off appear in the display.
2 Scroll to On (or Off to deactivate) and press Select.
Activate/deactivate 1-touch dialing
1-touch dialing must be activated before you can make calls using this
method. For information on assigning keys to 1-touch dialing and using
1-touch dialing, see “1-touch dialing” on page 47.
1 At the Start screen press, Menu 4-3-4 (Settings > Call settings >
1-touch dialing). After a brief pause, On and Off appear in the display.
2 Scroll to On (or Off to deactivate) and press Select.
Activate call waiting
If supported by your wireless provider, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, reject, or
ignore the incoming call.
ACTIVATE CALL WAITING
1 At the Start screen, press Menu 4-3-5 (Settings > Call settings >
Call waiting) and press Select. After a brief pause, Activate, Cancel,
and Check status appear in the display.
2 Scroll to Activate and press Select.
USE CALL WAITING
• During a call, press
h to answer the waiting call. The first call is put
on hold.
• Press
i to end the active call.
6200.ENv1_9356027.book Page 90 Wednesday, July 7, 2004 3:40 PM