User manual

Table Of Contents

If your wireless service provider supports this feature, then location info sharing allows

the phone to share position information over the network. For calls to emergency

numbers, this position information may be used by the emergency operator to

determine the position of the phone. The functionality of this feature is dependent

on the network, satellite systems, and the agency receiving the information. It may

not function in all areas or at all times.

At the start screen, select Menu > Settings > Call settings > Location info sharing >

Emergency or On > OK > OK.

Emergency—This is the phone default profile. The phone’s location information

is shared only during an emergency call to the official emergency number

programmed into your phone. The phone screen displays

in the upper left

hand corner of the start screen.

On—The phone location information is shared with the network whenever the

phone is powered on and activated. The screen displays

in the upper left

hand corner of the start screen.

Note: Location information will always be shared with the network during

emergency calls to the official emergency number programmed into the

phone, regardless of which setting is selected. After placing an emergency

call the phone remains in emergency mode for five minutes. During this

time, the location information will be shared with the network. For more

information,

see “Emergency calls” on page 74.

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key

except the power key, Left selection key, Right selection key, or End key.

At the start screen, select Menu > Settings > Call settings > Anykey answer and

press Select > On or Off and press Select.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a “fast” busy

signal when you dial. With automatic redial activated, your phone redials the

number up to 10 times, and notifies you once the network is available.

At the start screen, select Menu > Settings > Call settings > Automatic redial >

On or Off and press Select.

Activate 1-touch dialing

You can activate or deactivate 1-touch dialing. For more information, see “Set up

1-touch dialing” on page 17.

Automatic update of service

Your phone is capable of receiving updates to wireless services sent to your phone

by your service provider.

At the start screen, select Menu > Settings > Call settings > Automatic update

of service > On or Off and press Select.