User manual

Nokia 6230 User Guide 53 Copyright © 2004 Nokia
Messages
MANUAL ENTRY
1 From the menus, select Messages > Message settings > E-mail messages >
Active e-mail settings.
2 Scroll to the set in which you want to save the settings, and select Activate.
3 Select Edit active e-mail settings; then select each of the settings in turn and
enter all the required information. Contact your network operator or e-mail
service provider for the settings.
Mailbox name—Enter the name that you want to use for the mailbox. You can
use any name.
E-mail address—Enter your e-mail address.
My name—Enter your name or nickname. Your name and e-mail address will
be shown.
Outgoing (SMTP) server—Enter the server address.
Incoming server type—Select either POP3 or IMAP4 depending on the type of
e-mail system that you are using. If both types are supported, select IMAP4.
Changing the server type also changes the incoming port number.
If you select POP3 as the incoming server type, the following options are
shown:
• Incoming (POP3) server—Enter the e-mail server address for incoming
e-mail.
• POP3 user name—Enter the user name to access the e-mail account.
• POP3 password—Enter the password to access the e-mail account.
If you select IMAP4 as the incoming server type, the following options are
shown:
• Incoming (IMAP4) server—Enter the e-mail server address for incoming
e-mail.
• IMAP4 user name—Enter the user name and password to access the
e-mail account.
• IMAP4 password—Enter the password to access the e-mail account.
Other settings—Select each of the following in turn and enter the required
information:
• Include signature—You can define a signature that is automatically
added to the end of your e-mail, when you write your message.
• Use SMTP authorisation—If your e-mail service provider requires
authentication for sending e-mails, select Yes. In this case, you must also
define your SMTP user name and SMTP password.