User manual

35
Set up 1-touch dialing
You can associate any entry in the contacts list with a key from 2-9. To dial those entries,
press and hold the assigned key. See "Set up 1-touch dialing," p. 35 to activate or deactivate
1-touch dialing.
Assign a key to 1-touch dialing
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to an (empty) slot, and select Assign.
3. Enter the number (including the area code) and a name for the number, and select OK;
or select Search to retrieve a number from the contacts list.
If 1-touch dialing is off, the device displays a prompt and asks if you want to turn speed
dialing on.
4. Select Yes to activate 1-touch dialing.
Change speed dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing entry you want to change, and select Options > Change.
3. Enter the new number and a name for the entry, and select OK; or select Search to retrieve
a number from the contacts list.
Delete 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the entry you want to delete, and select Options > Delete > Yes.
■ Voice tags
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They depend on the speaker’s voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them in a
quiet environment.
• Very short names are not accepted. Use long names and avoid similar names for
different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an emergency,
so you should not rely on voice dialing in all circumstances.