User manual

Settings and tools
45
Fonts
To set the font size, select Menu > Settings & Tools > Display > Fonts >
Normal or Large.
■ System
The System menu allows you to designate specific network settings.
Standalone mode
To turn off radio frequencies, as in airplane mode, select Menu > Settings & Tools >
System > Standalone Mode. Select On or Off.
System select
To set your phone to roam or search for another network when you are not in
your home area, select Menu > Settings & Tools > System > System Select and
one of the following:
Home Only—Make and receive calls in your home area only.
Automatic A or Automatic B—Search for service in another network. The roaming
rate applies when you are not in the home service area.
NAM selection
If your phone is registered with two phone numbers (NAMs), for example, work and
personal numbers, you can choose which number to use as your origination number.
Select Menu > Settings & Tools > System > NAM Selection > NAM 1 or NAM 2.
Device information
To view information about your phone, select Menu > Settings & Tools > System >
Device Info > My Number, SW Version, or Icon Glossary.
Location
To share position information over the network, select Menu > Settings & Tools >
System > Location. For calls to emergency numbers, location information may be
used by the emergency operator to determine the position of the device. The
functionality and accuracy of this feature are dependent on the network, satellite
systems, and the agency receiving the information. This feature may not function
in all areas or at all times. Select Location On to make position information
continually available or select E911 Only to make this information available for
emergency services only.