User manual

[ 53 ]
Advanced features
9
2
Scroll to the command you wish to tag and press
Select
.
3
Press
Options
.
Add command
is highlighted, press
Select
.
4
Press
Start
, and when the phone beeps, pronounce the voice tag into
the microphone. The phone replays and saves the tag.
Note:
Don’t press
Quit
unless you want to cancel the recording.
Execute a voice command
After you’ve associated a voice tag with a command, execute the
command as follows:
1
Press and hold
Names
.
Please speak now
appears in the display.
2
Pronounce the tag for one of the 5 available commands.
Found:
<command>
appears in the display and the command is executed.
EXECUTE VOICE COMMANDS WITH THE HEADSET
After you’ve associated a voice tag with a command, you can also execute
voice commands using the optional HDC-9P headset.
1
At the Start screen, press and hold the remote button on the headset.
The phone beeps and
Please speak now
appears in the display.
2
Pronounce the tag for one of the 5 available commands.
Found: <command>
appears in the display and the command
is performed.
Tip:
You can also execute voice commands by pressing and holding
the
down
volume key on the side of the phone.
Change or erase an existing voice commands tag
1
At the Start screen, press
Menu 5-2
(Voice - Voice commands).
2
After a brief pause, the list of voice commands appear in the display.
3
Scroll to the voice command you wish to modify and press
Select
.
4
When the command you wish to modify appears in the display,
press
Options
.