User manual

[ 64 ]
Note: The Nokia TTY adapter HDA-8 is for use with compatible TTY
devices and headsets only. Please check your TTY device or headset
to ensure that the connection is compatible. Nokia original headsets
attach directly to the phone and do not require this adapter. Nokia
does not endorse, warrant, or authorize use of any enhancements
not manufactured or licensed by Nokia.
Connect TTY hardware
The TTY device comes
with a cable.
1 Plug the larger end
of this cable into
the input jack on
the TTY.
2 Plug the other end
of the cable into
the TTY adapter
HDA-8.
3 Plug the HDA-8 into the connector on the bottom of your phone.
Make a call with TTY
Note: You must have an enhancement attached to your phone
prior to selecting the Accessory settings menu.
1 From the menus, select Settings > Accessory settings > TTY/TDD >
Use TTY > Yes.
After a brief pause, a confirmation message appears in the display.
Note: After selecting Yes, this becomes the default and you will
not have to do it again unless you turn TTY/TDD off.
2 Press the End key to return to the start screen.
3 Enter the number you wish to call (on the phone) and press the
Talk key.
4 When the receiving party answers, begin typing your conversation
on the TTY.
Cable
TTY
HDA-8
1
3
2
6340i.ENv1_9310019.book Page 64 Thursday, July 10, 2003 3:21 PM