User manual

[ 66 ]
Loopset options
Use loopset—Enable use of the LPS-1 mobile inductive loopset. Select Yes
or No.
Default profile—Choose the profile you wish to be automatically
activated when a loopset is connected.
Automatic answer—Calls are answered automatically after one ring
when a loopset is connected. Select On or Off.
TTY/TDD option
Use TTY—Enable the use of a TTY/TDD device. Select Yes or No.
Note: If the loopset is enabled, you are asked to disable the
loopset before enabling TTY/TDD. Select Yes to disable the loopset
(thus enabling TTY/TDD). Select No to leave the loopset enabled.
• OPTIONAL HEADSETS
The HDC-9P and HDE-1 headsets can be purchased separately
as enhancements.
Connect the headset
1 Insert the headset plug into the enhancement
connection on the bottom end of your phone.
2 Place the round earbud in your ear.
With the headset connected, you can make,
answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the Talk key to place a call.
• Press the End key to end a call.
When in use, the headset microphone hangs at the
side of your head. Although it may seem far from
your mouth, you can speak at normal volume.
6340i.ENv1_9310019.book Page 66 Thursday, July 10, 2003 3:21 PM