User manual

[ 68 ]
Create a custom equalizer set
1 From the menus, select Settings > Call settings > Equalizer.
After a brief pause, a list of equalizer sets appears in the display.
2 Select Set 1 or Set 2; then select Edit.
Set 1 or Set 2 appears in the display with
the bar on the far left highlighted.
The bars adjust frequencies, from the lowest
(the leftmost bar) to the highest (the
rightmost bar). The higher the indicator on a
particular bar, the more that frequency is amplified.
3 To adjust the lowest frequency, select Adjust, use the scroll keys to
move the indicator up and down on the bar; then press Save to finish.
4 To adjust other frequencies, use the Down scroll key to move to the
next bar to the right, and the Up scroll key to move to the left.
5 Repeat steps 3 and 4 to adjust the setting for each frequency.
6 When you are finished, select Back.
7 To activate the setting, select Activate.
OR
To rename the setting, select Rename.
Choose an equalizer set while in a call
1 While in a call, select Options > Equalizer.
2 Scroll to one of the six equalizer settings and select Activate.
6340i.ENv1_9310019.book Page 68 Thursday, July 10, 2003 3:21 PM