/26/04 1:04 PM Page 1 Thank you for purchasing your new Nokia phone. We’re here for you! www.nokiahowto.com Learn how to use your new Nokia phone. www.nokia.com/us Get answers to your questions. Register your phone’s limited warranty so we can better serve your needs! Nokia Inc. 7725 Woodland Center Boulevard, Suite 150, Tampa FL 33614 . . Phone: 1.888.NOKIA.2U (1.888.665.4228) Fax: 1.813.249.9619 Text Telephone/Telecommunication Device for the Deaf (TTY/TDD) Users: 1.800.24.NOKIA (1.800.246.
Nokia 6600 User Guide What information is needed? Numbers Where is the number? My number Wireless service provider Voice mail number Wireless service provider Wireless provider’s number Wireless service provider Provider’s customer care Wireless service provider Model number Label on back of phone (under battery). See “Find the phone’s label” on page 14. Phone type Back of title page IMEI number Label on back of phone (under battery). See “Find the phone’s label” on page 14.
The wireless phone described in this guide is approved for use in the 900/1800 and 1900 GSM networks in North and South America. LEGAL INFORMATION 168 PART NO. 9231475, ISSUE NO. 2 Copyright © 2004 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia 6600, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.
EXPORT CONTROLS This device may contain commodities, technology, or software that may only be exported in accordance with the U. S. Export Administration regulations. Diversion contrary to U.S. or Canadian law is prohibited. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated.
NOTES
Contents 1. For your safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. General information . . . . . .
Get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Find the phone’s label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Contact Nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Welcome to nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Get the most out of this guide .
To-do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Importing data from compatible Nokia phones . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5. Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Taking pictures . . . . . . . . . . . . . . . . . . . . .
Creating and sending new messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Writing and sending text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Multimedia messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Inbox - receiving messages . . . . . . . . . . . . . . . . . . .
7. Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Changing general settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Call settings . . . . . . . . . . . . . . . . . . .
Creating a wallet profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Retrieving information from wallet to your browser . . . . . . . . . . . . . . . . . . . .85 Viewing ticket details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 Wallet settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Resetting the wallet and wallet code . . . . . . . . . . . . . . . . .
Application manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Installing applications - general information. . . . . . . . . . . . . . . . . . . . . . . . . . 97 Removing an application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 11. Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Bluetooth connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 PC connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Application not responding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 13. Reference Information . . . . . . . . . . .
For your safety 1 For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service. Press the End key as many times as needed to clear the display and return to the main screen.
For your safety • SHARED MEMORY The following features in this device may share memory: contacts, text messages and multimedia messages, images and ringing tones, video recorder, RealOne Player™, calendar and to-do notes, and downloaded applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many images may use all of the available memory.
2 General information Your Nokia 6600 phone provides various functions that are handy for daily use, such as Camera, Video recorder, Messaging, E-mail, Wallet, Clock, Calculator, and Calendar. Warning: All of the features in this device, other than the alarm clock require the phone to be switched on to use the features. Do not switch the device on when wireless phone use may cause interference or danger.
General information Inserting the SIM card Note: Before removing the cover, always switch off the power and disconnect the phone from the charger or any other device. Always store and use the phone with the cover attached. • Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, or other vendor.
Inserting the memory card • Keep all memory cards out of the reach of small children. 1 See ’Inserting the SIM card’ section for details on removing the cover. 6 2 Find the memory card slot. Ensure that the catch is slid towards the top of the phone until it reaches its highest position (6).
General information Charging the battery 1 Connect the power cord to the charger. You will hear it click into place. 2 Connect the charger to an AC wall outlet. 3 Connect the power cord from the charger to the base of the phone (10). The battery indicator bar starts scrolling. Note that you can use the phone while charging. 4 10 When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the AC outlet and then from the phone. See the ’Battery information’ chapter.
IF THE PHONE REQUESTS A LOCK CODE: • Key in the lock code (displayed as *****) and press . The factory setting for the lock code is 12345. For more information on the access codes, see the ’Tools’ chapter. Setting the time and date Use the number keys to key in first the current time and then the date. Press to accept the settings. • STANDBY MODE The indicators described below are shown when the phone is ready for use, with no characters keyed in. In this state, the phone is in ‘standby mode’.
General information Indicators related to actions One or more of the following icons may be shown when the phone is in standby mode: - Indicates that you have received new messages to the Inbox in Messaging. If the indicator is blinking, the phone memory is low and you must delete some data. See “Memory low” on page 108. - Indicates that you have received new e-mail. - Indicates that you have received one or several voice messages. See “Calling your voice mailbox” on page 16.
• MENU • Press (Menu key) to display the main Menu. In the Menu, you can access all the applications in your phone. Options in the Menu: Open, List view / Grid view, Move, Move to folder, New folder, App. downloads, Memory details, Help and Exit. Moving in the Menu • Move the joystick up , down , left and right (shown with blue arrows 1 to 4) to navigate the Menu.
General information Switching between applications If you have several applications open and want to switch from one application to another, press and hold (Menu key). The application switching window opens showing a list of applications that are currently open. Scroll to an application and press to go to it. Note: If memory is getting low, the phone may close some applications. The phone saves any unsaved data before an application is closed.
• • • • Editing items - To open an item for editing, you sometimes need to first open it for viewing and then select Options→ Edit, if you want to change its contents. Use the joystick to scroll through all fields of the item. Renaming items - To give a new name to a file or folder, scroll to it and select Options→ Rename. Removing, deleting items - Scroll to the item and select Options→ Delete or press . To delete many items at a time, you first need to mark them.
General information • VOLUME CONTROL • When you have an active call or are listening to a sound, press increase or decrease the volume level, respectively. or to Voice volume icons: - for earpiece mode, - for loudspeaker mode. Loudspeaker Your phone has a loudspeaker for handsfree use. The loudspeaker allows you to speak and listen to the phone from a short distance without having to hold the phone to your ear, for example, having it on a table nearby.
Note: When keyguard is on, calls may be possible to the emergency number programed into your phone (e.g. 911 or other official emergency number). Just key in the emergency number and press . The number is displayed only after you have keyed in its last digit. • GET HELP Find the phone’s label Information label under battery If you need help, Nokia Customer Care is available for assistance. Before calling, however, please read “Troubleshooting” on page 108.
General information • WELCOME TO NOKIA Congratulations on your purchase of the Nokia 6600 mobile phone. The Nokia 6600 can be connected to a PC, laptop, or other device using the data cable or built-in IR port. For more information, please refer to the PC Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com.
3 Your phone • MAKING A CALL 1 In standby mode, key in the phone number, including the area code. Press or to move the cursor. Press to remove a number. • For international calls, press twice for the international prefix (the + character replaces the international access code) and then key in the country code, the area code without 0, and the phone number. 2 Press 3 Press to end the call (or to cancel the call attempt). Pressing to call the number.
Your phone • If the phone asks for the voice mailbox number, key it in and press OK. You can obtain this number from your service provider. See “Settings for call forwarding” on page 19. Each phone line may have its own voice mailbox number. See “Line in use (network service)” on page 66. CHANGING THE VOICE MAILBOX NUMBER To change the phone number of your voice mailbox, go to Menu→ Tools→ Voice mailbox and select Options→ Change number.
• To have a private conversation with one of the participants: Select Options→ Conference→ Private. Scroll to the desired participant and press Private. The conference call is put on hold in your phone, and the other participants can still continue talking with each other while you have a private discussion with one participant only. Once you have finished the private conversation, press Cancel to return to the conference call.
Your phone Call waiting (network service) If you have activated the Call waiting service, the network will notify you of a new incoming call while you have a call in progress. 1 During a call, press to answer the waiting call. The first call is put on hold. To switch between the two calls, press Swap. 2 To end the active call, press . Settings for call forwarding When this network service is activated, you can direct your incoming calls to another number, for example, to your voice mailbox number.
Options in the Missed, Received, Dialed views: Call, Create message, Use number, Delete, Clear list, Add to Contacts, Help, and Exit. Missed calls and received calls To view a list of the last 20 phone numbers from which somebody has tried to call you without success (network service), go to Log→ Recent calls→ Missed calls. Tip: When you see a note in standby mode about missed calls, press Show to access the list of missed calls. To call back, scroll to the number or name you want and press .
Your phone GPRS data counter Go to Log→ GPRS counter. The GPRS data counter allows you to check the amount of data sent and received during packet data (GPRS) connections. For example, you may be charged for your GPRS connections by the amount of data sent and received. Viewing the general log Go to Menu→ Log and press . In the general log, for each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point.
4 Personal information • CONTACTS To open Contacts, press Menu→ Contacts. in standby mode or go to In Contacts, you can store and manage contact information, such as names, phone numbers, and addresses. You can also add a personal ringing tone, voice tag, or a thumbnail image to a contact card. You can create contact groups, which allow you to send text messages or e-mail to many recipients at the same time.
Personal information INSERTING AN IMAGE IN A CONTACT CARD To attach a small thumbnail image to a contact card, open a contact card, select Options→ Edit and then select Options→ Add thumbnail. The thumbnail image is also shown when the contact is calling you. After you attach a thumbnail image to a contact card, you can select Add thumbnail to replace the image with a different thumbnail or Remove thumbnail to remove the thumbnail from the contact card.
Before using voice dialing, note that: • Voice tags are not language dependent. They are dependent on the speaker's voice. • Voice tags are sensitive to background noise. Record and use them in a quiet environment. • Very short names are not accepted. Use long names and avoid similar names for different numbers. Note: You must say the name exactly as you said it when you recorded it.
Personal information When an application using a data call or GPRS connection is sending or receiving data, you cannot make a call by using voice dialing. To make a call by using a voice tag, end all active data connections.
Managing contact groups You can create contact groups, which can, for example, be used as distribution lists for sending text messages and e-mail. A ringing tone may be added to a group. See “Adding a ringing tone for a contact card or group” on page 25. Options in the Groups list view: Open, New group, Delete, Rename, Ringing tone, Contacts info, Settings, Help, and Exit. CREATING CONTACT GROUPS 1 2 3 In the Contacts directory, press to open the Groups list. Select Options→ New group.
Personal information EDITING CALENDAR ENTRIES Options when editing a calendar entry: Delete, Send, Help, and Exit. 1 In the Day view, scroll to the entry and press to open it. 2 Edit the entry fields and press Done. • If you are editing a repeated entry, choose how you want the changes to take effect: All occurrences - all repeated entries are changed / This entry only - only the current entry will be changed.
CALENDAR VIEWS Press in the Month, Week, or Day views to automatically highlight today’s date. To write a calendar entry, press any digit key ( ) in any calendar view. A Meeting entry is opened and the characters you keyed in are added to the Subject field. Note: Synchronization icons in Month view: - Private, - Public, - None, and - the day has more than one entry. Note: Calendar entry icons in Day and Week views: - Memo, and - Anniversary. Month view In the Month view, one row equals one week.
Personal information Day view In the Day view, you can see the calendar entries for the selected day. The entries are grouped according to their starting time. Memos and Anniversaries are placed before 8 o’clock. • To open an entry for editing, scroll to it and press • Press to go to the next day or press . to go to the previous day. Settings for calendar views Select Options→ Settings and select: • Calendar alarm tone - To select a personalized alarm tone, or no tone at all.
2 Write the task in the Subject field. Press to add special characters. • To set the due date for the task, scroll to the Due date field and key in a date. • 3 To set a priority for the to-do note, scroll to the Priority field and press . To save the to-do note, press Done. If you remove all characters and press Done, the note will be deleted, even if you edit a previously saved note.
Multimedia 5 Multimedia • CAMERA Press Camera in standby mode or go to Menu→ Camera. With the Camera application you can take pictures of people or events while on the move. The images are automatically saved in the Gallery application, where you can rename them and organize them in folders. You can also send images in a multimedia message, as an e-mail attachment, or via a Bluetooth or infrared connection. The camera produces JPEG images.
After the image has been saved: • If you do not want to save the image, select Options→ Delete. • To return to the viewfinder to take a new picture, press . You can insert an image into a contact card. See “Inserting an image in a contact card” on page 23. SELF-TIMER Use the self-timer to delay the taking of a picture, so that you can include yourself in the picture. 1 Select Options→ Self-timer. 2 Select the delay 10 seconds, 20 seconds, or 30 seconds. 3 Press Activate.
Multimedia • Night when the lighting is dim and the camera needs a longer exposure time for the picture to be of good quality. Note that, in dim conditions, any movement while taking a picture may cause it to get blurred. The image size and orientation is the same for Standard and Night. • When you are taking a picture in Standard or Night mode, the viewfinder resolution is 160x120 pixels, and in Portrait mode, 80x96.
• VIEWING IMAGES Pictures taken with the camera are stored as images in the Gallery. See “Gallery” on page 38. Select an image from the list of images in the Images folder in the Gallery to start the image viewer and display the image. When viewing an image, pressing image in the current folder. or takes you to the next or previous Options when viewing an image: Send, Set as wallpaper, Rotate, Zoom in, Zoom out, Full screen, Delete, Rename, View details, Add to ’Go to’, Help, and Exit.
Multimedia Keyboard shortcuts • Rotate 90 degrees: - counterclockwise, status is not stored permanently. • - zoom in, normal view. • - clockwise. The rotation - zoom out, press and hold to return to the - change between full screen and normal view. • VIDEO RECORDER Go to Menu→ Video recorder. With the Video recorder you can record video clips, on your phone or on a memory card, if you use one. You can also send video clips that you have recorded. Video recorder uses shared memory.
Setting up your Video recorder Use the following settings to define how videos are recorded. • Select Options→ Settings and choose: • Image size - Select Small or Large. Large reduces frame rate. • Audio - Select On or Off. On reduces the maximum recording duration. • Default video name - Define a default name. • Memory in use - Select Phone memory or Memory card. • REALONE PLAYER™ Go to Menu→ RealOne Player.
Multimedia Scroll to a file and press to play the file. • To stream content over the air: • Select a streaming link saved in the Gallery. Before your live content begins streaming, your phone will connect to the site and load the file. • Open the link to a file in the browser. To stream live content, you must first configure your default access point. See “Access points” on page 68. Many service providers will require you to use an Internet access point (IAP) for your default access point.
• GALLERY Go to Menu→ Gallery. Use the Gallery to store and organize your images, sound clips, and video clips, streaming links and RAM files. Gallery uses shared memory. See “Shared memory” on page 3. Open the Gallery to see a list of the folders in the phone memory. Press to see the folders on the memory card, if you use one. Select a folder Images, Sound clips, or Video clips (or other folder that you have created) and press to open it.
Multimedia Other default folders PICTURE MESSAGES FOLDER Use this folder to store pictures sent to you in picture messages. • Select the folder Images→ Picture msgs.. Options in the Picture messages folder: Open, Send, Delete, Mark/Unmark, Rename, View details, Help, and Exit. To save a picture that you have received in a picture message, go to Messaging→ Inbox, open the message, and select Options→ Save picture.
Before you can upload images, you must enter the settings for the image server. See “Set up the image server” on page 40.You can get these settings from your service provider. 1 Select Options→ Image uploader. 2 To begin an upload, mark the images, or the entire folder that you want to upload, and select Upload. 3 Enter a name for the folder on the image server that the images will be stored in and press . SET UP THE IMAGE SERVER 1 Select Settings→ Image servers and press field.
Messaging 6 Messaging Go to Menu→ Messaging. In Messaging you can create, send, receive, view, edit, and organize: • text messages, • multimedia messages, • e-mail messages, and • configuration messages. Text messages and multimedia messages use shared memory. See “Shared memory” on page 3. You can also receive messages and data via an infrared or Bluetooth connection, receive service messages, cell broadcast messages, and send service commands.
Reports- you can request the network to send you a delivery report of the text messages, configuration messages, and multimedia messages you have sent. To turn on delivery report reception, select Options→ Settings→ Text message or Multimedia message, scroll to Receive report, and select Yes. Receiving a delivery report of a multimedia message that has been sent to an e-mail address might not be possible.
Messaging If you write many phone numbers or e-mail addresses in the To: field, you must remember to add a semicolon (;) between each item to separate them from each other. When you retrieve recipients from the Contacts directory, the semicolon is added automatically. Sending options To change how a message is sent, select Options→ Sending options when you are editing a message. When you save the message, its sending settings are also saved.
• To insert a space, press three times. . To move the cursor to the next line, press Using predictive text input To activate predictive text input, press and select Predictive text on. This will activate predictive text input for all editors in the phone. The indicator is shown at the top of the display. 1 Write the desired word by pressing the keys . Press each key only once for one letter. The word changes after every key press.
Messaging • To insert a number in letter mode, press and hold the desired number key, or press and select number mode, key in the numbers you want, and press OK. • The most common punctuation marks are available under repeatedly to reach the desired punctuation mark. . Press Press and hold to open a list of special characters. Use the joystick to scroll through the list and press Select to select a character. Or press and select Insert symbol.
3 To copy the text to the clipboard, while still holding , press Copy. Or, release and then press it once to open a list of editing commands, for example, Copy or Cut. If you want to remove the selected text from the document, press 4 To insert the text into a document, press and hold Or, press . and press Paste. once and select Paste.
Messaging Writing and sending text messages Options in the text message editor: Send, Add recipient, Insert, Delete, Check contacts, Message details, Sending options, Help, and Exit. 1 Select New message. A list of message options opens. 2 Select Create:→ Text message. The editor opens with the cursor in the To: field. Press to select recipient(s) from the Contacts directory or write the phone number of the recipient. Press to add a semicolon (;) to separate each recipient. Press to the message field.
2 Enter recipient information and add text. 3 Select Options→ Send or press . Note: Each picture message is made up of several text messages. Therefore, sending one picture message may cost more than sending one text message. Multimedia messages A multimedia message can contain a combination of text, images, video and sound clips. Note: Multimedia messages can be used only if supported by your service provider.
Messaging Note: The default setting is Image size: Small. When you are sending a multimedia message to an email address or another Nokia 6600 phone, if possible, use the larger image size (network dependent). To change the settings, select Messaging→ Options→ Settings→ Multimedia message→ Image size→ Large • To add a sound, select Options→ Insert→ Sound clip or New sound clip. When sound has been added, the icon is shown in the navigation bar.
E-mail SETTINGS NEEDED FOR E-MAIL Before you can send, receive, retrieve, reply to, and forward e-mail to a separate e-mail account, you must: • Configure an Internet access point (IAP) correctly. See “Connection settings” on page 66. • Define your e-mail settings correctly. See “Settings for e-mail” on page 61. Follow the instructions given by your remote mailbox and Internet service provider.
Messaging • INBOX - RECEIVING MESSAGES Options in Inbox: Open, Create message, Reply, Delete, Message details, Move to folder, Mark/Unmark, Help, and Exit. Messages and data can be received via text message, multimedia message, an infrared connection, or a Bluetooth connection. When there are unread messages in Inbox, the icon changes to . In Inbox, the message icons tell you what kind of a message it is.
• • Add to Contacts - allows you to copy the phone number or e-mail address of the message sender to the Contacts directory. Choose whether you want to create a new contact card or add the information to an existing contact card. Find - Searches the message for phone numbers, e-mail addresses, and Internet addresses. After the search, you can make a call or send a message to the found number or e-mail address, or save the data to Contacts or as a bookmark.
Messaging • Calendar entry - to save the invitation to Calendar, select Options→ Save to Calendar. • Browser message - to save the bookmark, select Options→ Save to bookmarks. The bookmark is added to the Bookmarks list in browser services. If the message contains both browser access point settings and bookmarks, to save the data select Options→ Save all. Or, select Options→ View details to view the bookmark and access point information separately.
• MY FOLDERS In My folders you can organize your messages into folders, create new folders, and rename and delete folders. Templates folder • You can use text templates to avoid rewriting messages that you send often. To create a new template, select Options→ New template. • REMOTE MAILBOX (NETWORK SERVICE) When you open this folder, you can either connect to your remote mailbox to: • retrieve new e-mail headings or messages, or • view your previously retrieved e-mail headings or messages offline.
Messaging Note: If you are using the POP3 protocol, e-mail messages are not updated automatically in online mode. To see the newest e-mail messages, you need to disconnect and then make a new connection to your mailbox. VIEWING E-MAIL MESSAGES WHEN OFFLINE When you view e-mail messages offline, your phone is not connected to the remote mailbox. This mode may help you to save on connection costs. See “GSM data calls” on page 67.
• Selected - to retrieve only the e-mail messages that have been marked. Use the Mark/Unmark→ Mark / Unmark commands to select messages one by one. See “Actions common to all applications” on page 11. • All - to retrieve all messages from the mailbox. To cancel retrieving, press Cancel. 2 After you have retrieved the e-mail messages, you can continue viewing them online. Select Options→ Disconnect to close the connection and to view the e-mail messages offline.
Messaging RETRIEVING ATTACHMENTS TO THE PHONE • If the attachment has a dimmed indicator, it has not been retrieved to the phone. To retrieve the attachment, scroll to it and select Options→ Retrieve. If your mailbox uses the IMAP4 protocol, you can decide whether to retrieve e-mail headings only, messages only, or messages and attachments. With the POP3 protocol, the options are e-mail headings only or messages and attachments. See “Settings for e-mail” on page 61.
UNDELETING E-MAIL MESSAGES WHEN OFFLINE To cancel deleting an e-mail from both the phone and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options→ Undelete. • OUTBOX Outbox is a temporary storage place for messages that are waiting to be sent. Status of the messages in Outbox: • Sending - A connection is being made and the message is being sent.
Messaging Options in Cell broadcast: Open, Subscribe /Unsubscribe, Hotmark / Unhotmark, Topic, Settings, Help, and Exit. Note: A packet data (GPRS) connection may prevent cell broadcast reception. Contact your service provider for the correct GPRS settings. See “Packet data (General Packet Radio Service, GPRS)” on page 67. • SERVICE COMMAND EDITOR In the Messaging main view, select Options→ Service command.
• Message sent as - The options are Text, Fax, Paging, and E-mail. For further information, contact your service provider. Change this option only if you are sure that your message center is able to convert text messages into these other formats. • Preferred connection - You can send text messages via the normal GSM network or via GPRS, if supported by the network. See “Packet data (General Packet Radio Service, GPRS)” on page 67. • Reply via same ctr.
Messaging • Allow anon. messages - Select No, if you want to decline messages coming from an anonymous sender. • Receive ads - Define whether you want to allow reception of multimedia message advertisements or not. • Receive report - Set to Yes, if you want the status of the sent message (Pending, Failed, Delivered) to be shown in the Reports. • Deny report sending - Choose Yes, if you do not want your phone to send delivery reports of received multimedia messages.
• Send message (network service) - Define how e-mail is sent from your phone. Immediately - A connection to the mailbox is started immediately after you have selected Send. During next conn. - E-mail is sent when you connect to your remote mailbox the next time. • Send copy to self - Select Yes to save a copy of the e-mail to the address defined in My e-mail address in your remote mailbox.
Messaging Settings for cell broadcast Check with your service provider whether Cell broadcast is available and what the available topics and related topic numbers are. Go to Messaging→ Options→ Settings→ Cell broadcast to change the settings: • Reception - On or Off. • Language - All allows you to receive cell broadcast messages in every possible language. Selected allows you to choose in which languages you wish to receive cell broadcast messages.
7 Tools • SETTINGS Changing general settings Go to Menu→ Tools→ Settings. 1 Scroll to a setting group and press open it. to 2 Scroll to a setting you want to change and press to: • switch between options if there are only two (On/Off), • open a list of options or an editor, • open a slider view, press or to increase or decrease the value, respectively. You may be able to receive some settings from your service provider in a short message.
Tools • the special characters that are available when you press the keys. and Predictive text - To set predictive text input On or Off for all editors in the phone. You can also change this setting when you are in an editor. See “Tips on using predictive text input” on page 44. Welcome note or logo - The welcome note or logo is displayed briefly each time you switch on the phone. Select Default if you want to use the default image or animation. Select Text to write a welcome note (max. 50 letters).
AUTOMATIC REDIAL • When this setting is activated, your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Press to stop automatic redialing. SUMMARY AFTER CALL • Activate this setting if you want the phone to briefly display the duration of the last call. 1-TOUCH DIALING • Select On and the numbers assigned to the 1-touch dialing keys ( ) can be dialed by pressing and holding the key. See “Assigning 1-touch dialing keys” on page 25.
Tools There are three different kinds of access points that you can define: MMS access point, browser access point, and Internet access point (IAP). Check with your service provider what kind of an access point is needed for the service you wish to access. You need to set access point settings, if you want to, for example, • send and receive multimedia messages, • send and receive e-mail, • download Java™ applications, • use Image upload, or • browse pages.
CREATING AN ACCESS POINT Options in the Access points list: Edit, New access point, Delete, Help, and Exit. You may have preset access point settings in your phone. Or, you may receive access point settings over the air from a service provider. If there are no access points defined when you open Access points, you will be asked if you want to create one.
Tools • Dial-up number (for Data call and High speed (GSM) only) - The modem telephone number of the access point. • User name - Write a user name if required by the service provider. The user name may be needed to make a data connection, and is usually provided by the service provider. The user name is often case-sensitive. • Prompt password - If you must key in a new password every time you log on to a server, or if you do not want to save your password to the phone, choose Yes.
If you need to enter these settings, contact your Internet service provider. The following settings are shown if you have selected data call and high speed data as the connection type: • Use callback - This option allows a server to call you back once you have made the initial call. Contact your service provider to subscribe to this service. Note: Charges may apply for certain types of received calls, such as roaming and high speed data calls. Contact your GSM service provider for more information.
Tools Access point - The access point name is needed when you want to use your phone as a packet data modem to your computer. See “Using your phone as a modem” on page 106. DATA CALL Go to Settings→ Connection→ Data call. The Data call settings affect all access points using a data call and high speed data call. Online time - If there are no actions the data call is dropped automatically after a time-out period. The options are User defined, in which case you enter a time, or Unlimited.
• Lock code (5 digits) - The lock code can be used to lock the phone and keypad to avoid unauthorized use. The factory setting for the lock code is 12345. To avoid unauthorized use of your phone, change the lock code. Keep the new code secret and in a safe place separate from your phone. • PUK and PUK2 codes (8 digits) - The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK2 code is required to change a blocked PIN2 code.
Tools • To add new numbers to the Fixed dialing list, select Options→ New contact or Add from Contacts. Closed user group (network service) - You can specify a group of people to whom you can call and who can call you. For more information, contact your service provider. Select: Default to activate the default group agreed on with the service provider, On if you want to use another group (you need to know the group index number), or Off.
Changing the trust settings of an authority certificate • Scroll to an authority certificate and select Options→ Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example: Application manager / Yes - the certificate is able to certify the origin of new software. Internet / Yes - the certificate is able to certify e-mail and imaging servers.
Tools Cell info display • Select On to set the phone to indicate when it is used in a cellular network based on Micro Cellular Network (MCN) technology and to activate cell info reception. Enhancement settings Indicators shown in standby mode: - a headset is connected. - a loopset is connected. Scroll to an enhancement folder and open the settings: • Select Default profile to select the profile you want to be activated each time when you connect a certain enhancement to your phone.
Receiving files via Infrared Files are automatically received to the root level of the folder structure. Move or copy them to other folders. • Select Options→ Receive via infrared. See “Sending and receiving data via infrared” on page 103. Viewing memory consumption If you have a memory card installed on your phone, you will have a choice of two memory views, one for the phone memory and one for the memory card. Press • or to move from one memory tab to another.
Tools • Voice commands are sensitive to background noise. Record and use them in a quiet environment. • Very short voice commands are not accepted. Use longer words and avoid similarities between different voice commands. Note: You must say the voice command exactly as you said it when you recorded it. This may be difficult in, for example, a noisy environment or during an emergency, so you should not rely solely upon voice commands in all circumstances.
Starting an application using a voice command 1 In standby mode, press and hold Speak now is displayed. . A short tone is played and the note 2 When you are starting an application by saying a voice command, hold the phone at a short distance away from your mouth and say the voice command clearly. 3 The phone plays the original voice command and starts the application. • If the phone plays the wrong voice command, press Retry.
Personalization 8 Personalization • PROFILES Go to Menu→ Profiles. In Profiles, you can adjust and customize the phone tones for different events, environments, or caller groups. There are five preset profiles: Normal, Silent, Meeting, Outdoor, and Pager, which you can customize to meet your needs. You can see the currently selected profile at the top of the display in standby mode. If the Normal profile is in use, only the current date is shown.
To use MIDI, AMR, WAY, MP3, and other sound files as ringing tones, they must be stored in the Digital sounds folder in the Gallery. • Ringing type - When Ascending is selected, the ringing volume starts from level one and increases level by level to the set volume level. • Ringing volume - To set the volume level for the ringing and message alert tones. • Message alert tone - To set the tone for messages. • IM alert tone - To set the tone for instant messages.
Personalization Editing themes Group together elements from other themes, or images from the Gallery to personalize themes further. 1 Scroll to a theme, select Options→ Edit, and select: • Wallpaper - To select an image from one of the available themes, or select your own image from the Gallery, to use as a background image in standby mode. • Color palette - To change the color palette used on the display.
• GO TO Press Go to in standby mode or go to Menu→ Go to. Use Go to for storing shortcuts, links to your favorite photos, video clips, notes, Recorder sound files, browser bookmarks, and saved browser pages. The default shortcuts: - opens the Notes editor, - opens the Calendar to the current date, - opens the Messaging Inbox. Options in the Go to main view: Open, Edit shortcut name, Shortcut icon, Delete shortcut, Move, List view / Grid view, Help, and Exit.
Extras 9 Extras • WALLET Go to Menu→ Extras→ Wallet. Wallet provides you with a storage area for your personal information, such as credit and debit card numbers, addresses and other useful data, for example, user names and passwords. The information stored in the wallet can be easily retrieved while browsing to automatically fill in online forms on browser pages, for example, when the service asks for credit card details. Data in the wallet is encrypted and protected with a wallet code that you define.
Storing personal card details 1 Select the Cards category from the main wallet menu and press 2 Select a type of card from the list and press . . • Payment cards - Credit and debit cards • Loyalty cards - Membership and store cards • Online acc. cards - Personal user names and passwords to online services • Address cards - Basic contact details for home/office • User info cards - Customized personal preferences for online services 3 Select Options→ Create new. An empty form opens.
Extras Some of the fields must contain data selected from the wallet. You must save the data under the relevant category before creating a wallet profile, or the profile cannot be created. • Profile name - Choose and enter a name for the profile. • Payment card - Select a card from the Payment card category. • Loyalty card - Select a card from the Loyalty card category. • Online access card - Select a card from the Online acc. card category.
Wallet settings Select Options→ Settings from the main wallet menu: • Wallet code - Change your wallet code. You will be prompted to enter the current code, create a new code, and verify the new code. • RFID - Set the phone ID code, type, and sending options (for future development dependent on RFID-based ticketing). • Automatic close - Change the automatic time-out period (1 - 60 minutes). After the time-out period has elapsed, the wallet code must be re-entered to gain access to the contents.
Extras • CONVERTER Go to Menu→ Extras→ Converter. In Converter, you can convert measures such as Length from one unit to another, for example, Yards to Meters. Note: The Converter has limited accuracy and rounding errors may occur. Converting units Options in Converter: Conversion type, Currency rates (not applicable to other units), Help, and Exit. To make currency conversion you must first set the exchange rate. See “Setting a base currency and exchange rates” on page 87.
3 Add exchange rates, scroll to the currency, and key in a new rate, that is, how many units of the currency equal one unit of the base currency you have selected. 4 After you have inserted all the needed exchange rates, you can make currency conversions. See “Converting units” on page 87. • NOTES Go to Menu→ Extras→ Notes. You can link notes to Go to and send them to other devices. Plain text files (TXT format) you receive can be saved to Notes. • Press to save. - to start to write.
Extras PERSONALIZING THE ALARM TONE 1 To personalize the alarm tone, select Options→ Settings. 2 Scroll to Clock alarm tone and press 3 When you scroll through the list of tones, you can stop on a tone to listen to it before you make your selection. Press Select to select the current tone. . • RECORDER Go to Menu→ Extras→ Recorder. The voice recorder allows you to record telephone conversations and voice memos.
Note: Use only compatible Multimedia cards (MMC) with this device. Other memory cards, such as Secure Digital (SD) cards, do not fit in the MMC card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted. Format memory card Important: All data stored on the memory card will be permanently deleted when you format it.
Services and Applications 10 Services and Applications • SERVICES (MOBILE BROWSER) Go to Menu→ Services or press and hold standby mode. in Various service providers maintain pages specifically designed for mobile phones, offering services that can be, for example, news, weather reports, banking, travel information, entertainment, and games. With the mobile browser you can view these services as WAP pages written in WML, XHTML pages written in XHTML, or a mixture of both.
KEYING IN THE SETTINGS MANUALLY Follow the instructions given to you by your service provider. 1 Go to Settings→ Connection settings→ Access points and define the settings for an access point. See “Connection settings” on page 66. 2 Go to Services→ Options→ Bookmark manager→ Add bookmark. Write a name for the bookmark and the address of the browser page defined for the current access point. Making a connection Once you have stored all the required connection settings, you can access browser pages.
Services and Applications ADDING BOOKMARKS MANUALLY 1 In the Bookmarks view, select Options→ Bookmark manager→ Add bookmark. 2 Start to fill in the fields. Only the address must be defined. The default access point is assigned to the bookmark if no other one is selected. Press to enter special characters such as /, ., :, and @. Press to clear characters. 3 Select Options→ Save to save the bookmark. Browsing On a browser page, new links appear underlined in blue and previously visited links in purple.
SAVING BOOKMARKS • To save a bookmark while browsing, select Options→ Save as bookmark. • To save a bookmark received in a smart message, open the message in the Inbox in Messaging and select Options→ Save to bookmarks. VIEWING SAVED PAGES Options in the Saved pages view: Open, Back to page, Reload, Saved pages manager, Mark/Unmark, Navigation options, Advanced options, Details, Settings, Help, and Exit.
Services and Applications Note: Only install software from sources that offer adequate protection against viruses and other harmful software. The information or services you have accessed are stored in the cache memory of the phone. A cache is a buffer memory that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords (for example, your bank account), empty the cache of your phone after each use.
Ending a connection • Select Options→ Advanced options→ Disconnect, or • Press and hold to quit browsing and to return to standby mode. Browser settings Select Options→ Settings: • Default access point - If you want to change the default access point, press to open a list of available access points. The current default access point is highlighted. See “Connection settings” on page 66. • Show images - Choose if you want to view pictures when you are browsing.
Services and Applications Options in the Application manager main view: Install, View details, View certificate, Update, Go to web address, Remove, View log, Send log, Settings, App. downloads, Help, and Exit. When you open Application manager, you can see a list of: • applications saved in Application manager, • partially installed applications (indicated by ), and • fully installed applications that you can remove (indicated by ). Note: You can only use Symbian operating system applications with a .
INSTALLING APPLICATIONS • Open Application manager, scroll to the application, and select Options→ Install to start the installation. • Alternatively, search the phone memory or the memory card, select the application, and press to start the installation. Some applications may give the option of partial installation allowing you to select the particular components of an application that you want to install.
Connectivity 11 Connectivity • BLUETOOTH CONNECTION Go to Menu→ Connectivity→ Bluetooth. You can transfer data from your phone to another compatible device, for example, a phone, a headset using Bluetooth technology, or a computer, via Bluetooth or infrared. This phone is designed to be compliant with and to adopt Bluetooth Specification 1.1. However, inter operability between the phone and other products with Bluetooth wireless technology depends also on the profiles and protocols used.
There may be restrictions on using devices using Bluetooth technology. Check with your local authorities. Activating Bluetooth application for the first time When you activate Bluetooth for the first time, you are asked to give a name to your phone. After you have set Bluetooth to be active and changed My phone's visibility to Shown to all, your phone and this name can be seen by other users with devices using Bluetooth technology. • Write a name (max. 30 letters).
Connectivity 3 The phone starts to search for devices within range. Devices using Bluetooth technology that are within range start to appear on the display one by one. You can see a device icon, the device’s name, the device type, or a short name. Paired devices are shown with . A paired device is one where a Bluetooth connection already exists between your phone and the other device. • To interrupt the search, press Stop.
Icons for different devices: - Computer, - Phone, - Audio/video, and - Bluetooth device. Note: If sending fails, the message or data will be deleted. The Drafts folder in Messaging does not store messages sent via Bluetooth. CHECKING THE STATUS OF THE BLUETOOTH CONNECTION • When • When is shown in standby mode, Bluetooth is active. is blinking, your phone is trying to connect to the other device. • When is shown continuously, the Bluetooth connection is active.
Connectivity SETTING A DEVICE TO BE AUTHORIZED OR UNAUTHORIZED After you have paired with a device, you can set it to be authorized or unauthorized: Unauthorized (default) - Connection requests from this device need to be accepted separately every time. Authorized - Connections between your phone and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, for example, your PC, or devices that belong to someone you trust.
2 The user of the receiving device activates the infrared port. To activate the infrared port of your phone to receive data via infrared, go to Menu→ Connectivity→ Infrared and press . 3 The user of the sending device selects the desired infrared function to start data transfer. To send data via infrared, select Options→ Send→ via infrared in an application. If data transfer is not started within one minute after the activation of the infrared port, the connection is canceled and must be started again.
Connectivity Options in the Connection manager main view when there are one or more connections: Details, Disconnect, Disconnect all, Help and Exit. Viewing connection details To view the details of a connection, scroll to a connection and select Options→ Details The following is displayed: Name - the name of the Internet access point (IAP) in use, or ’Modem connection’ if the connection is a dial-up connection. Bearer - the type of data connection: Data call, High sp. GSM, or GPRS.
3 You can find PC Suite in the ‘Install’ section. Double-click ‘PC Suite for Nokia 6600’. The installation wizard will guide you through the installation process. Using your phone as a modem Use your phone as a modem to connect to the Internet with a compatible PC, or to send and receive faxes. Detailed installation instructions can be found in Quick guide for Modem Options for Nokia 6600 on the CD-ROM supplied with the phone. • SYNC - REMOTE SYNCHRONIZATION Go to Menu→ Connectivity→ Sync.
Connectivity User name - Your user ID for the synchronization server. Contact your service provider or system administrator for your correct ID. Password - Write your password. Contact your service provider or system administrator for the correct value. To choose the items that you want to synchronize, press the appropriate fields. 3 and select Yes in Press Done to save the settings.
12 Troubleshooting Memory low When one of the following notes is shown, the phone memory is low and you must delete some data: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data. To view what kind of data you have and how much memory the different data groups consume, go to File manager and select Options→ Memory details.
Troubleshooting • Q&A Phone display Q. Why do missing, discolored, or bright dots appear on the screen every time I turn on my phone? A. This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault. Camera Q. Why do images look smudgy? A. Check that the camera lens protection window is clean. See “Care and Maintenance” on page 113. Q. Why are there random colored dots in display when the phone is in Night mode? A.
Q. How can I end the data connection when the phone starts a data connection again and again? A. The phone is trying to retrieve a multimedia message from the multimedia messaging center. Check that the settings for multimedia messaging have been defined correctly and that there are no mistakes in phone numbers or addresses. Go to Messaging and select Options→ Settings→ Multimedia message. To stop the phone from making a data connection, you have the following options.
Troubleshooting Log Q. Why does the log appear empty? A. You may have activated a filter, and no communication events fitting that filter have been logged. To see all events, select Options→ Filter→ All communication. PC connectivity Q. Why do I have problems in connecting the phone to my PC? A. Make sure that PC Suite is installed and running on your PC. See the Installation guide for PC Suite on the CD-ROM in the ’Install’ section.
13 Reference Information • BATTERY INFORMATION Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery.
Reference Information • ENHANCEMENTS A few practical rules about accessories and enhancements: • Keep all accessories and enhancements out of the reach of small children. • When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord. Check regularly that enhancements installed in a vehicle are mounted and are operating properly. Installation of any complex car enhancements must be made by qualified personnel only.
• • • • • • Do not attempt to open the device other than as instructed in this guide. Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Do not paint the device. Paint can clog the moving parts and prevent proper operation. Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).
Reference Information PACEMAKERS Pacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. To minimize the potential for interference, persons with pacemakers should: • Always keep the device more than 6 in (15.
Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations.
Reference Information CERTIFICATION INFORMATION (SAR) THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with a carry case, belt clip, or holder that contains no metal and that positions the handset a minimum of 5/8-inch (1.5 cm) from the body. Use of other carry cases, belt clips, or holders may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 5/8-inch (1.
Reference Information • TECHNICAL INFORMATION Feature Specification Weight 4.375 oz with BL-5C 850 mAh battery Size 4.27 x 2.29 x .94 in. (length, width, thickness) Frequency Range Lowband 880—915 MHz (TX) 925—960 MHz (RX) Highband 1800 1710—785 MHz (TX) 1805—1880 MHz (TX) Highband 1850—1910 MHz (TX) 1930—1990 MHz (RX) Transmitter Output Power Up to 2 W Battery Voltage 3.
14 Nokia One-year Limited Warranty Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty.
Nokia One-year Limited Warranty 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable: a) The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shippi
9 e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage.
Nokia One-year Limited Warranty 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state.
NOTES Nokia 6600 User Guide 124 Copyright © 2004 Nokia
Appendix A Message from the CTIA Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police.
Appendix A Message from the CTIA 4 Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. 5 Do not take notes or look up phone numbers while driving.
Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones.
Appendix B Message from the FDA Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones ©July 18, 2001 For updates: http://www.fda.
Consumer Update on Wireless Phones U.S. Food and Drug Administration 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode.
Appendix B Message from the FDA FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon.
5. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists.
Appendix B Message from the FDA Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing. 8.
They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 11. What about wireless phone interference with medical equipment? Radiofrequency energy (RF) from wireless phones can interact with some electronic devices.
Index Numerics Connection status indicators 102 Device icons 102 Pairing 101 Pairing requests 101 Passcode, glossary explanation 101 Preset passcode 101 Receiving data 103 Sending data 100 Settings 100 Unique device address 101 Browser Browser access points, see Access points Connecting 92 Ending connections 96 Icons 92 Service message settings 62 Service messages 53, 54 WAP pages 91 XHTML pages 91 Browsing 93 1-touch dialing 25 Making calls 17 A Access codes 71 Access points 66 Settings 68 Access points
Calling 16 Calls 1-touch dialing 17 Answering 18 Conference calls 17 Declining 18 Dialed 20 Duration 20 Forwarding 18 International 16 Missed 20 Options during a call 18 Received 20 Settings 65 Settings for forwarding 19 Transferring 18 Using the Contacts directory 16 Camera 31 Image types 32 Memory consumption 33 Self-timer 32 Settings 32 CD-ROM 105 Cell broadcast messages 58 Cell info display 75 Certificates 73 Trust settings 74 Charges Packet data 67 Clearing memory Calendar entries 108 Log information 1
Customer care Canada 14 USA 14 Cutting Text 46 Saving attachments 57 Settings 61 Enhancements Settings 75 Erasing Log 21 Recent calls log 20 D Data connections Indicators 9 Settings 66 Data connections to network Ending 105 Viewing 105 Data Import Contacts 30 Date, settings 71 Declining calls 18 Deleting Calendar entries 27 Delivery reports 42 Dialed numbers 20 Digital rights management 95 Display settings 65 Downloading files to the Gallery 39 F Favorites Adding a shortcut 82 File formats RealOne Player
H J Handsfree See Loudspeaker Headset 13 Help 11 Java Installing Java applications 98 See Applications.
Memory card 89 Backup 90 Consumption 90 Format 90 Insert 6 Password 90 Restore 90 Unlock 90 Video clips 89 Memory low Troubleshooting 108 Viewing memory consumption 90 Menu 10 Menu key 10 Rearranging the main Menu 10 Messaging Delivery reports 42 Inbox 51 Main view 41 Messages on the SIM card 58 Multimedia messages 48 My folders 54 Outbox 58 Picture messages 47 Sent folder settings 63 Settings 59 Text messages 47 Writing e-mail 50 Writing text 43 Missed calls 20 Mobile browser 91 Modem Using your phone as a
Playing media files 36 Predictive text input 44 Tips 44 Turning off 45 Prices for packet data 67 Profiles 79 Adding voice tags 77 Renaming 80 Settings 79 Adding a personal ringing tone 25 Muting 18 Receiving in a configuration message 52 Settings 79 S Saving wallpapers 39 Screen saver Settings 65 Security Access codes 71 Security certificates 73 Settings 71 Seek 37 Self-timer (camera) 32 Sending Data via Bluetooth 100 Data via infrared 103 Service command editor 59 Service provider for data connections, g
Enhancements 75 Fixed dialing 72 General 64 Info service 63 Lock code 8, 72 Log 21 Messaging 59 Messaging, Sent folder 63 PIN code 7, 71 RealOne Player 37 Security 71 Sounds 79 Text messages 59 Video recorder 36 Wallet 86 Shortcuts In Favorites 82 In Images 35 SIM card Copying names and numbers 22 Insert 5 Messages 58 SIS file 97 Snooze 88 Software Removing 98 Transferring a .
GIF animations 34 Multimedia presentations 52 Network data connection details 105 Voice commands 76 Adding 77 Starting applications 78 Voice dialing 23 Voice mailbox 16 Changing the number 17 Forwarding calls to voice mailbox 19 Voice messages 16 Voice recorder 89 Voice tags 23 Adding 24 Changing 25, 78 Deleting 25, 78 Listening 25, 78 Making calls 24 Volume control 13 Wallet code 83 Reset 86 Wallet profile 84 WAP pages Browser 91 Writing 43 Predictive text input 44 Predictive text input, turning off 45 Tr
NOTES Nokia 6600 User Guide 143 Copyright © 2004 Nokia
NOTES 144 Copyright © 2004 Nokia
NOTES Nokia 6600 User Guide 145 Copyright © 2004 Nokia
NOTES 146 Copyright © 2004 Nokia
NOTES Nokia 6600 User Guide 147 Copyright © 2004 Nokia
Para obtener un manual del usuario en español favor de llamar o enviar un fax al teléfono 1-888-NOKIA-2U, fax 813-249-9619.
