User manual
Table Of Contents
- Nokia N810 Internet Tablet - WiMAX Edition User Guide
- Contents
- Safety
- Your device
- Internet connections
- Browse the web
- Internet communication
- Media applications
- Positioning
- Settings
- Utilities
- PC connectivity
- Battery and charger information
- Additional safety information
- Open source software notice
Internet connections
24
Set as trusted device. Select OK, and enter the same
passcode on your compatible phone.
5. After successful pairing, the mobile operator setup
wizard is presented. Use it for saving your internet
connection settings. If you have already saved the
settings or plan to save them later from the control
panel, select Cancel.
To access the setup wizard afterwards, tap and
select Settings > Control panel. In Control panel,
select > Tools > Cellular provider setup wizard....
6. Select Finish to save the settings.
Manually create connection
To set up a cellular connection manually, tap and
select Settings > Control panel. In Control panel, select
Connectivity > Connections > New. The connection setup
wizard opens. Select Next to proceed.
1. In Connection setup: Name and type, define the
following settings:
Connection name—Enter a descriptive name for the
connection.
Connection type:—Select the type of the network over
which you want to access the internet.
To use a packet-switched data service in a cellular
network, such as GPRS (network service), select GPRS.
To use a circuit-switched data service in a cellular
network, such as HSCSD (high-speed circuit-switched
data; network service), select Data call.
Select Next to proceed.
2. Your device detects the cellular network type of your
phone automatically when you pair the phone with
your device. However, if you have not paired a mobile
phone with your device, in Select cellular network
type, select the type of network over which the internet
connection takes place, and select Next to proceed.
3. In the connection setup dialog, define the following
settings:
Access point name—Enter the name of the internet
access point. Obtain the name from your internet
service provider. This setting is only shown if you
selected packet-switched data connection (such as
GPRS) and your phone uses a GSM cellular network.
Dial-up number—Enter the modem telephone number
of the internet access point.
User name—Enter a user name, if required. The user
name is usually provided by the internet service
provider.