User manual

● Access point — Select the access point to use for
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection. This setting is
available only if you have selected Internet as the
bearer type.
● Host address — Enter the web address of the
configuration server.
● Port — Enter the port number of the server.
● User name and Password — Enter your user ID and
password for the configuration server.
● Allow configuration — Select Yes to allow the
server to initiate a configuration session.
● Auto-accept all requests — Select Yes if you do
not want the server to ask for your confirmation
when it initiates a configuration session.
● Network authentication — Select whether to use
http authentication.
● Network user name and Network
password — Enter your user ID and password for
the http authentication. This setting is available
only if you have selected Network
authentication to be used.
To connect to the server and receive configuration
settings for your device, select Options > Start
configuration.
To view the configuration log of the selected profile,
select Options > View log.
To update the device software over the air, select
Options > Check for updates. The update does not
erase your settings. When you receive the update
package on your device, follow the instructions on the
display. Your device is restarted once the installation is
complete. Downloading software updates may involve
the transmission of large amounts of data (network
service). Make sure that the device battery has enough
power, or connect the charger before starting the
update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
restarted. Be sure to back up data before accepting
installation of an update.
150
Settings