User manual

Make calls
32
2 A short tone is played, and Speak now is displayed.
Say clearly the name or nickname that is saved on
the contact card.
3 The device plays a synthesized voice tag for the recognized
contact in the selected device language, and displays
the name and number. After a timeout of 1.5 seconds,
the device dials the number.
If the recognized contact was not correct, select
Next to view a list of other matches, or Quit to
cancel voice dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise the
device selects the first available number of the following:
Mobile, Mobile (home), Mobile (work), Telephone, Tel.
(home), and Tel. (work).
Answer or decline a call
To answer the call, press or open the slide cover.
To mute the ringing tone when a call comes in, select Silence.
Tip! You can also use the key on the remote
control to answer and end a call.
If you do not want to answer a call, press to decline
it. If you have activated the Call forward > If busy
function to forward calls, declining an incoming call also
forwards the call. See “Call forwarding,” p. 99.
When you reject an incoming call, you can also select Send
text message to send a message to the caller informing
why you cannot answer the call. You can edit the text
before sending it. To set up this option and write a
standard text message, see “Call settings,” p. 91.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Settings >
Call > Call waiting.
Tip! To change the device tones for different
environments and events, for example, when you
want your device to be silent, see “Profiles—Set
tones,” p. 27.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press . To end both
calls, select Options > End all calls.