User manual

Connectivity
83
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity,
open Notes, write the text, and select Options >
Send > Via Bluetooth.
1 Open an application or folder where the item you want
to send is stored. For example, to send an image to
another compatible device, open Gallery.
2 Select the item and Options > Send > Via Bluetooth.
The device icon, the name of the device, the device
type, or a short name for devices with Bluetooth
technology within range start to appear on the display.
Device icons: computer, phone, audio
or video device, and other device.
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See “Pair devices,” p. 83.
5 When the connection has been established, Sending
data is shown.
The Sent folder in Messag. does not store messages sent
using Bluetooth connectivity.
Tip! When searching for devices, some devices
may show only the unique address (device address).
To find the unique address of your device, enter the
code *#2820# in the standby mode.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, scroll right.
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired device.
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Paired devices are indicated by in the device search.