User manual

Connectivity
87
2 Define the following:
Sync profile name—Write a descriptive name for the
profile.
Applications—Select the applications to synchronize
with this profile, Contacts and Calendar, for example.
Scroll to each application and press the joystick to
define its synchronization settings:
• Include in sync—Select Yes if you want to synchronize
the application.
• In Remote database, enter a correct path to the remote
calendar, address book, or database on the server.
• Select Synchronization type: Normal (two-way
synchronization), To server only, or To phone only.
Connection settings—Define the following. Contact
your service provider or system administrator for the
correct values.
• Server version—Select the SyncML version the
synchronization server uses. You must select 1.2
to synchronize e-mail.
• Server ID—Enter the server ID for the e-mail server
(shown only if Server version is set to 1.2).
• Data bearer—Select the connection type: Internet,
or Bluetooth.
• Access point (shown only if Data bearer is set to
Internet)—Select an access point to use for the data
connection.
• Host address—The IP address of the host server.
• Port—The server port number (shown only if Data
bearer is set to Internet).
• User name—Your user ID for the synchronization
server.
• Password—Your password for the synchronization
server.
• Allow sync requests—Select Yes if you want to allow
the server to start a synchronization.
• Accept all sync reqs.—Select No if you want your
device to ask you before a synchronization initialized
by the server is started.
• Network authentic. (shown only if Data bearer is
set to Internet)—Select Yes to enter a network user
name and password. Scroll down to view the user
name and password fields.
3 Select Back to save the settings and return to the
main view.