User manual

Table Of Contents
Camera
26
The image counter (4) displays the estimated number of
images you can capture using the current image quality
setting and memory in use (the counter is not displayed
during focus and image capture).
The device memory ( ) and memory card ( )
indicators (5) show where images are saved.
Tip! Select Options > Turn icons on to display
all viewfinder indicators or Turn icons off to
display only the camera status indicators.
When taking a picture, note the following:
Use both hands to keep the camera still.
The quality of a digitally zoomed picture is lower than
that of a nonzoomed picture.
The camera goes into the battery saving mode if there
are no keypresses for a moment. To continue taking
pictures, press .
After you take the picture, select the following from
the toolbar:
If you do not want to keep the image, select Delete.
To send the video using multimedia, e-mail, Bluetooth
connectivity, or infrared, press , or select Send.
To capture a new image, select New image.
To print the picture, select Print. See "Image print", p. 39.
Still image camera settings
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup, see
"Setup settings—adjust color and lighting", p. 27. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Image qualityPrint 3M - Large (2048x1536 resolution),
Print 2M - Med. (1600x1200 resolution), Print 1.3M -
Small (1280x960 resolution), or MMS 0.3M (640x480
resolution). The better the image quality, the more memory
the image consumes. If you want to print the image, select
Print 3M - Large, Print 2M - Med., or Print 1.3M - Small.
If you want to send it through e-mail, select Print 1.3M -
Small. To send the image through MMS, select MMS 0.3M.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures right away.