User manual

Use access point — Set the device to connect to the destination using this access
point after confirmation or automatically.
Modify advanced GPRS access point settings
Select Options > Advanced settings.
Select from the following:
Network type — Select the internet protocol type to transfer data to and from
your device. The other settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address of your device.
DNS addresses — Enter the IP addresses of the primary and secondary DNS servers,
if required by your service provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy server.
Proxy port number — Enter the port number of the proxy server.
Wi-Fi access point settings
Select Menu > Settings and Connectivity > Destinations > Access point, and
follow the instructions.
Edit a wireless LAN (Wi-Fi) access point
Select an access point group and access point marked with
. Follow the
instructions from your WLAN service provider.
Select from the following:
WLAN network name — Select Enter manually or Search for networks. If you
select an existing network, the Wi-Fi network mode and Wi-Fi security mode are
determined by the settings of its access point device.
Network status — Define whether the network name is displayed.
Connectivity 133