User manual

Receive data using Bluetooth connectivity
When you receive data through Bluetooth connectivity, a tone sounds, and you are
asked if you want to accept the message. If you accept,
is displayed, and you
can find an informative message about the data in the Inbox folder in Messaging.
The received data is automatically saved to the device memory. Messages received
through Bluetooth connectivity are indicated by
.
Block devices
You can prevent devices from establishing a Bluetooth connection to your device.
Select Menu > Settings and Connectivity > Bluetooth.
Block a device
On the Paired devices tab, go to a device you want to block, and select Options >
Block.
Unblock a device
On the Blocked devices tab, go to a device, and select Options > Delete.
Unblock all blocked devices
Select Options > Delete all.
If you reject a pairing request from another device, you are asked if you want to
block all future connection requests from this device. If you accept the query, the
device is added to the list of blocked devices.
Remote SIM mode
With remote SIM mode, you can use a compatible car kit accessory. Before remote
SIM mode can be activated, the two devices must be paired and the pairing initiated
from the other device. When pairing, use a 16-digit passcode, and set the other
device as authorized.
Select Menu > Settings and Connectivity > Bluetooth.
Connectivity 141