User's Manual

8
International Technical Support Numbers (partial list only):
Note For regional support policy details and more, visit http://support.microsoft.com/international.aspx
and select your country from the list. If there is no Microsoft subsidiary ofce in your country or region, please
contact the establishment from which you obtained your Microsoft product.
Australia
Technical Support Phone: 13 20 58
Technical Support Fax: (61) (2) 9023 5021
France
(33) (0) 825 827 829, followed by 0 and code
10 20 #
Telex: MSPARIS 604322F
Germany
Standard Support (Installation and Handling):
(01805) 67 22 55
Japan
Microsoft Support Contract Center
TEL: (81) (3) 5354-4700
FAX: (81) (3) 5388-8253
New Zealand
Technical Support: (64) (9) 357-5575
South Africa
Phone: (27) (11) 257 0000 or 0860225567
(inside South Africa)
Technical Support Fax: (27) (11) 257-0424
United Kingdom
Tel: [phone]
Customers phoning from Ireland:
[phone].
General information about Microsoft support
in central Europe:
Telephone: [phone]
Fax: [phone]
Regulatory Information
Tested to comply with FCC Standards. For home or ofce use. Not intended for use in machinery, medical or
industrial applications. Any changes or modications not expressly approved by Microsoft could void the user’s
authority to operate this device.
This product is for use with NRTL Listed (UL, CSA, ETL, etc.), and/or IEC/EN 60950 compliant (CE marked)
Information Technology equipment. No serviceable parts included.
This device is rated as a commercial product for operation at +41ºF (+5ºC) to +95ºF (+35ºC).
Note For detailed information on U.S. and Canadian radio interference regulations, search for “regulations” in
the onscreen Help les installed with IntelliType Pro or IntelliPoint software.
This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission (FCC)
rules, Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
The term “IC:” before the certication/registration number only signies that the Industry Canada technical
specications were met.
Cet appareil numérique de la classe B est conforme aux normes NMB-003 et CNR-210 du Canada. Son
fonctionnement est assujetti aux deux conditions suivantes : (1) Cet appareil ne peut pas provoquer
d’interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences
pouvant entraîner un fonctionnement non désiré
L’expression « IC : » avant le numéro d’homologation/enregistrement signie seulement que les spécications
techniques édictées par Industrie Canada ont été respectées.
Microsoft Corporation; One Microsoft Way; Redmond, WA 98052-6399; U.S.A.
United States: [phone] Canada: [phone]
RF Technical Specications
RF output power: < 54 dBµV/m at 3 m
Keyboard with two channels: RF frequencies: 27.095MHz (channel 1), 27.195MHz (channel 2)
Keyboard with a single channel: RF frequency: 27.195MHz
Mouse with two channels: RF frequencies: 27.045MHz (channel 1), 27.145MHz (channel 2)
Mouse with a single channel: RF frequency: 27.145MHz
Information for Optical Mouse Products Only
User-observable light is 15 microwatts in normal operation. This product has
Class 1 LED Product
been tested to comply with International Standard IEC 60825-1:1993/A2:2001.
This product uses LEDs that are inherently Class 1.
X1042009mnl_enu.indd 4/1/2004, 12:33 PM8