User Manual

19
Information About LED Devices
This product has been evaluated to comply with International Standard
IEC 60825-1:1993/A2:2001.
This product uses LEDs that are inherently Class 1.
Information About Laser Devices
This device complies with International Standard IEC 60825-1:2001-08 for a Class 1 laser product. This
device also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.
50, dated July 26, 2001.
● This device emits a collimated (parallel) beam of infrared light (invisible to the user).
● Maximum output of the laser radiation: < 716 microwatts (at 832 nanometers) to 834 microwatts (at
865 nanometers).
● Emitted laser wavelength(s): nominal: 850 nanometers, range: (832-865 nanometers).
● This optical device has no serviceable parts.
Caution Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
● Do not disassemble the device.
● Do not use the device outside of its specified operating temperature range +41ºF (+5ºC) to +95ºF
(+35ºC). If the device is exposed to an environment outside of its prescribed operation, unplug the
device or remove the batteries (if wireless) and allow the temperature to stabilize within the specified
operating range before using the device.
A Class 1 laser product is safe under reasonably foreseeable conditions
of operation as described by IEC 60825-1 and 21 CFR 1040.10. However,
it is recommended that you not direct the laser beam (which is emitted
from the bottom of the mouse) at anyone’s eyes.
Product Disposal Information
Dispose of this product in accordance with local and national disposal regulations (if any),
including those governing the recovery and recycling of waste electrical
and electronic equipment (WEEE).
CLASS 1 INVISIBLE
LASER PRODUCT
IEC 60825-1:2001-08
Class 1 LED product
X11xxxxx01mnl_multi.indd 19 11/21/2005 11:05:53 AM