User Manual

6
3 Connect the Receiver to the Computer
● Turn on your computer, and then plug the rectangular
USB connector into your computer’s rectangular USB
port.
Important If you’re running Windows
®
98, you may be
prompted to insert the Windows 98 CD when you plug the
connector into your computer’s USB port. The required USB
driver is located in the Win98 folder of the Windows 98 CD.
4 Test the Mouse
Try using the mouse. If it doesn’t work as expected, make sure that you
completed the following procedures as specified earlier in these instructions:
● The battery or batteries are new and inserted correctly.
● The receiver and mouse are correctly positioned within their wireless range
and there are no nearby items that might cause interference.
● The receiver is correctly connected to the computer.
If the mouse is still not working, try reconnecting the mouse to the receiver.
To reconnect the mouse to the receiver
1 Make sure that the mouse and receiver are positioned as specified earlier in
this manual.
2 Press the button on the receiver, and then immediately press the Connect
button on the bottom of the mouse. Using the tip of a pen may make it easier
to press smaller buttons.
USB connector
X11xxxxx01mnl_multi.indd 6 11/21/2005 11:05:45 AM