User's Manual

● Remove the batteries if they are worn out or before storing your device for an extended period of time.

● Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance

with Local and National Disposal Regulations.

● If a battery leaks, remove all batteries, taking care to keep the leaked uid from touching your skin

or clothes. If uid from the battery comes into contact with skin or clothes, ush skin with water

immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp

paper towel, or follow the battery manufacturer’s recommendations for cleanup.

Disposable (non-rechargeable) batteries only:

● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the

correct size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries.

Rechargeable batteries only:

● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same

type and rating as the batteries provided.

● Charge only with the recharger provided with the product.

Lithium button cell batteries only:

● Perchlorate Material — special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate

Headset Devices

Extended exposure to high volumes when using a headset may result in temporary or permanent

hearing loss.

To prevent damage to your headset, avoid sitting or stepping on the headset, its cable, or the cable

connector.

Webcam Devices

Webcam with magnetic and adhesive mounting

After the adhesive attachment disc has been applied to the mounting surface, removing it may damage the

cosmetic coating and/or leave an adhesive residue.

Applying the attachment disc next to or directly to a CRT-based display screen may cause permanent visual

distortion of the displayed image near the area mounted.

Wireless Devices

Before boarding any aircraft or packing a wireless device in luggage that will be checked, remove the

batteries from the wireless device or turn the wireless device off (if it has an on/off switch). Wireless devices

can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed

and the wireless device is turned on (if it has an on/off switch).

X121690305mnl.indb 4 5/21/2008 3:15:52 PM