User's Manual

3
adapter, before plugging the AC adapter into a power outlet, make sure the prong assembly is of the
proper conguration for the power outlet and fully seated into the adapter.
Caution: Cable and cord safety
Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull
on them as they move around or walk through the area. Do not allow children to play with cables
and cords.
To avoid damaging the power cords and power supply:
• Protect the power cords from being walked on.
• Protect cords from being pinched or sharply bent, particularly where they connect to the power
outlet, the power supply unit, and the device.
• Do not jerk, knot, sharply bend, or otherwise abuse the power cords.
• Do not expose the power cords to sources of heat.
• Keep children and pets away from the power cords. Do not allow them to bite or chew on them.
• When disconnecting the power cords, pull on the plug—do not pull on the cord.
• If a power cord or power supply becomes damaged in any way, stop using it immediately.
• Unplug your device during lightning storms or when unused for long periods of time.
• For devices with an AC power cord that connects to the power supply, always connect the power
cord according to the following instructions:
1 Plug the AC power cord into the power supply until it seats fully.
2 Plug the other end of the AC power cord into the wall outlet.
Warning: Battery Safety Information
This device may contain a built-in battery, improper use of which may result in explosion. Do not
heat, open, puncture, mutilate, or dispose of the product in re. Do not leave the device in direct
sunlight for an extended period of time, which could cause melting or battery damage. The battery
in this device is not user replaceable and should only be replaced by Microsoft or a Microsoft
Authorized Service Provider. See support.microsoft.com for additional details.
• Do not disassemble or open, crush, bend or deform, puncture or shred
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or
expose to water or other liquids, expose to re, explosion or other hazard.
• Only use the battery with a charging system that has been qualied with the system per CTIA
Certication Requirements for Battery System Compliance to IEEE 1725. Use of an unqualied
battery or charger may present a risk of re, explosion, leakage, or other hazard.