Water System User Manual

Microsoft Dynamics CRM 4.0 Installing Guide

7-53

<PrivUserGroup>CN=value,OU=value,DC=value,DC=value,DC=value</PrivUserGroup>

<SQLAccessGroup>CN=value,OU=value,DC=value,DC=value,DC=value</SQLAccessGr

oup>

<UserGroup>CN=value,OU=value,DC=value,DC=value,DC=value</UserGroup>

<ReportingGroup>CN=value,OU=value,DC=value,DC=value,DC=value</ReportingGroup

<PrivReportingGroup>CN=value,OU=value,DC=value,DC=value,DC=value</PrivReportingG

roup>

</Groups>

When used, Setup will use the existing groups in Active Directory instead of creating them

during installation. If <automanagegroupsoff> is true, Setup will not add or remove any

members to those groups.

<Reboot>true/false</Reboot>

If this option is not specified, the default is false. This means that the server will not restart at

the end of Setup. Also, this option applies only to a final install restart, and not previous

restarts that may be required for other components.

<Email>

Specifies the Microsoft Exchange Server computer or POP3 that will be used by the E-mail

Router to route incoming e-mail messages.

</Email>

Specifies the e-mail server that will be used for e-mail routing.

<InstallDir>C:\Program Files\Microsoft Dynamics CRM</InstallDir>

Important To install Microsoft Dynamics CRM Server for Internet access, you

must add the following ifdsettings elements and associated values.

This option should only be used for Internet-facing deployments. Set enabled = "true" to

notify Microsoft Dynamics CRM Server Setup to configure the deployment for Internet

access. If the <ifdsettings> element is not specified, the enabled attribute value is set to

false.

<internalnetworkaddress>IP Network Address-Subject Mask</internalnetworkaddress>

IP address and subnet mask, such as 157.56.137.105-255.255.255.0. This is the internal

IP address and the associated subnet mask of the server that is running IIS where the

Microsoft Dynamics CRM Server Web application is running. If you will deploy Microsoft

Dynamics CRM Server on multiple servers on different subnets you can repeat this

element for each IP and subnet mask address that is in the deployment. Notice that, if

you leave this element blank, users will always be prompted, when they log on to

Microsoft Dynamics CRM, for both internal and external access.

<rootdomainscheme>https/http</rootdomainscheme>

Must be https, which will use secure sockets layer (SSL), or http, which will use the

nonsecure HTTP protocol.

Warning Setup does not require SSL on the Web site where Microsoft

Dynamics CRM is installed. We strongly recommend that you specify the https