Operating Instructions

Operating Instructions Client Reference

Printing without Using a Print Server

Preparation

To use a printer connected to the Ethernet interface, IEEE 802.11b (Wireless LAN) interface or IEEE

1394 (IP over 1394) interface, select "SmartNetMonitor" when installing the printer driver.

Configuring the Protocols

Configuring TCP/IP and IPP for Printing

Follow these instructions to configure the printer and Windows 95/98/Me to use the TCP/IP protocol

and IPP.

❖

❖❖

❖ Configuring the printer

Configure the printer to use the TCP/IP protocol.

• Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)

• Assign an IP address and make other settings required for using the TCP/IP protocol.

Reference

For more information about how to make the above settings, see “Configuring the printer for the

Network” in the Quick Installation Guide.

If DHCP is used to assign IP addresses, see Appendix, “When Using DHCP” in the Administrator

Reference.

Under Windows Me, when you want to use the IP over 1394, see the Option Setup Guide.